.. zephyr:code-sample:: usb-dfu
:name: USB DFU (Device Firmware Upgrade)
:relevant-api: usbd_api _usb_device_core_api
Implement device firmware upgrade using the USB DFU class driver.
Overview
********
This sample app demonstrates use of a USB DFU Class driver provided
by the Zephyr project.
Requirements
************
This project requires an USB device driver. Currently, the USB DFU
class provided by the Zephyr project depends on DFU image manager and
partition layout. Refer to :ref:`flash_map_api` for details about
partition layout. You SoC must run MCUboot as the stage 1 bootloader.
This sample is built as an application for the MCUboot bootloader.
.. note::
This example explicitly turns :kconfig:option:`CONFIG_USB_DFU_ENABLE_UPLOAD` on.
Building and Testing
********************
Building and signing the application
====================================
This sample can be built in the usual way (see :ref:`build_an_application`
for more details) and flashed with regular flash tools, but will need
to be loaded at the offset of SLOT-0.
Application images (such as this sample) must be signed.
The build system can do this for you by setting the :kconfig:option:`CONFIG_MCUBOOT_SIGNATURE_KEY_FILE` symbol.
For example:
.. code-block:: console
west build -b nrf52840dk/nrf52840 zephyr/samples/subsys/usb/dfu -d build-dfu -- \
-DCONFIG_MCUBOOT_SIGNATURE_KEY_FILE=\"bootloader/mcuboot/root-rsa-2048.pem\"
Build and flash MCUboot bootloader for Zephyr project as it is described in
the `Using MCUboot with Zephyr`_ documentation. Then build, sign and flash
the USB DFU sample at the offset of SLOT-0.
Build and sign a second application image e.g. :ref:`hello_world`,
which will be used as an image for the update.
Do not forget to enable the required :kconfig:option:`CONFIG_BOOTLOADER_MCUBOOT` option (as described
in :ref:`mcuboot`). For example:
.. code-block:: console
west build -b nrf52840dk/nrf52840 zephyr/samples/hello_world -d build-hello_world -- \
-DCONFIG_BOOTLOADER_MCUBOOT=y '-DCONFIG_MCUBOOT_SIGNATURE_KEY_FILE="bootloader/mcuboot/root-rsa-2048.pem"'
Testing
=======
The Linux ``dfu-util`` tool can be used to backup or update the application
image.
Use the following command to backup the SLOT-0 image:
.. code-block:: console
dfu-util --alt 0 --upload slot0_backup.bin
Use the following command to update the application:
.. code-block:: console
dfu-util --alt 1 --download build-hello_world/zephyr/zephyr.signed.bin
Reset the SoC. MCUboot boot will swap the images and boot the new application,
showing this output to the console:
.. code-block:: console
*** Booting Zephyr OS build zephyr-v3.0.0-360-gc0dd594d4d3d ***
I: Starting bootloader
I: Primary image: magic=good, swap_type=0x3, copy_done=0x1, image_ok=0x1
I: Secondary image: magic=good, swap_type=0x2, copy_done=0x3, image_ok=0x3
I: Boot source: none
I: Swap type: test
I: Bootloader chainload address offset: 0xc000
I: Jumping to the first image slot
*** Booting Zephyr OS build zephyr-v3.0.0-361-gb987e6daa2f9 ***
Hello World! nrf52840dk
Reset the SoC again and MCUboot should revert the images and boot
USB DFU sample, showing this output to the console:
.. code-block:: console
*** Booting Zephyr OS build zephyr-v3.0.0-360-gc0dd594d4d3d ***
I: Starting bootloader
I: Primary image: magic=good, swap_type=0x2, copy_done=0x1, image_ok=0x3
I: Secondary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
I: Boot source: none
I: Swap type: revert
I: Secondary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
I: Bootloader chainload address offset: 0xc000
I: Jumping to the first image slot
*** Booting Zephyr OS build zephyr-v3.0.0-361-gb987e6daa2f9 ***
[00:00:00.005,920] <inf> main: This device supports USB DFU class.
Permanent download and automatic reboot
=======================================
There are some symbols that can be used to enable a hands free download:
To mark SLOT-1 as permanent after the download completes,
enable the :kconfig:option:`CONFIG_USB_DFU_PERMANENT_DOWNLOAD` symbol.
To automatically reboot after the download completes,
enable the :kconfig:option:`CONFIG_USB_DFU_REBOOT` symbol.
.. warning::
Enabling :kconfig:option:`CONFIG_USB_DFU_PERMANENT_DOWNLOAD` can lead to a bricked device!
Make sure there is another way to download firmware.
For example via a debugger or Mcuboot's recovery mode.
Both symbols can be enabled with the :file:`overlay-permanent-download.conf` overlay. For example:
.. code-block:: console
west build -b nrf52840dk/nrf52840 zephyr/samples/subsys/usb/dfu -d build-dfu -- \
-DCONFIG_BOOTLOADER_MCUBOOT=y '-DCONFIG_MCUBOOT_SIGNATURE_KEY_FILE="bootloader/mcuboot/root-rsa-2048.pem"' \
-DEXTRA_CONF_FILE=overlay-permanent-download.conf
The listing below shows the output to the console when downloading via dfu-util.
Note the ``Swap type: perm``.
.. code-block:: console
*** Booting Zephyr OS build zephyr-v3.0.0-361-ge6900e2451d5 ***
[00:00:00.005,920] <inf> main: This device supports USB DFU class.
*** Booting Zephyr OS build zephyr-v3.0.0-360-gc0dd594d4d3d ***
I: Starting bootloader
I: Primary image: magic=good, swap_type=0x4, copy_done=0x1, image_ok=0x1
I: Secondary image: magic=good, swap_type=0x3, copy_done=0x3, image_ok=0x1
I: Boot source: none
I: Swap type: perm
I: Bootloader chainload address offset: 0xc000
I: Jumping to the first image slot
*** Booting Zephyr OS build zephyr-v3.0.0-361-gb987e6daa2f9 ***
Hello World! nrf52840dk
.. _MCUboot GitHub repo: https://github.com/zephyrproject-rtos/mcuboot
.. _Using MCUboot with Zephyr: https://docs.mcuboot.com/readme-zephyr
5a0ecb9641