373 lines
8.0 KiB
C
373 lines
8.0 KiB
C
/*
|
|
* Copyright (c) 2020 PHYTEC Messtechnik GmbH
|
|
* Copyright (c) 2021 Nordic Semiconductor ASA
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <logging/log.h>
|
|
LOG_MODULE_REGISTER(modbus, CONFIG_MODBUS_LOG_LEVEL);
|
|
|
|
#include <kernel.h>
|
|
#include <string.h>
|
|
#include <sys/byteorder.h>
|
|
#include <modbus_internal.h>
|
|
|
|
#define DT_DRV_COMPAT zephyr_modbus_serial
|
|
|
|
#define MB_RTU_DEFINE_GPIO_CFG(inst, prop) \
|
|
static struct gpio_dt_spec prop##_cfg_##inst = { \
|
|
.port = DEVICE_DT_GET(DT_INST_PHANDLE(inst, prop)), \
|
|
.pin = DT_INST_GPIO_PIN(inst, prop), \
|
|
.dt_flags = DT_INST_GPIO_FLAGS(inst, prop), \
|
|
};
|
|
|
|
#define MB_RTU_DEFINE_GPIO_CFGS(inst) \
|
|
COND_CODE_1(DT_INST_NODE_HAS_PROP(inst, de_gpios), \
|
|
(MB_RTU_DEFINE_GPIO_CFG(inst, de_gpios)), ()) \
|
|
COND_CODE_1(DT_INST_NODE_HAS_PROP(inst, re_gpios), \
|
|
(MB_RTU_DEFINE_GPIO_CFG(inst, re_gpios)), ())
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(MB_RTU_DEFINE_GPIO_CFGS)
|
|
|
|
#define MB_RTU_ASSIGN_GPIO_CFG(inst, prop) \
|
|
COND_CODE_1(DT_INST_NODE_HAS_PROP(inst, prop), \
|
|
(&prop##_cfg_##inst), (NULL))
|
|
|
|
#define MODBUS_DT_GET_SERIAL_DEV(inst) { \
|
|
.dev_name = DT_INST_BUS_LABEL(inst), \
|
|
.de = MB_RTU_ASSIGN_GPIO_CFG(inst, de_gpios), \
|
|
.re = MB_RTU_ASSIGN_GPIO_CFG(inst, re_gpios), \
|
|
},
|
|
|
|
#ifdef CONFIG_MODBUS_SERIAL
|
|
static struct modbus_serial_config modbus_serial_cfg[] = {
|
|
DT_INST_FOREACH_STATUS_OKAY(MODBUS_DT_GET_SERIAL_DEV)
|
|
};
|
|
#endif
|
|
|
|
#define MODBUS_DT_GET_DEV(inst) { \
|
|
.iface_name = DT_INST_LABEL(inst), \
|
|
.cfg = &modbus_serial_cfg[inst], \
|
|
},
|
|
|
|
#define DEFINE_MODBUS_RAW_ADU(x, _) { \
|
|
.iface_name = "RAW_"#x, \
|
|
.raw_tx_cb = NULL, \
|
|
.mode = MODBUS_MODE_RAW, \
|
|
}
|
|
|
|
|
|
static struct modbus_context mb_ctx_tbl[] = {
|
|
DT_INST_FOREACH_STATUS_OKAY(MODBUS_DT_GET_DEV)
|
|
#ifdef CONFIG_MODBUS_RAW_ADU
|
|
LISTIFY(CONFIG_MODBUS_NUMOF_RAW_ADU, DEFINE_MODBUS_RAW_ADU, (,), _)
|
|
#endif
|
|
};
|
|
|
|
static void modbus_rx_handler(struct k_work *item)
|
|
{
|
|
struct modbus_context *ctx;
|
|
|
|
ctx = CONTAINER_OF(item, struct modbus_context, server_work);
|
|
if (ctx == NULL) {
|
|
LOG_ERR("Failed to obtain context pointer?");
|
|
return;
|
|
}
|
|
|
|
switch (ctx->mode) {
|
|
case MODBUS_MODE_RTU:
|
|
case MODBUS_MODE_ASCII:
|
|
if (IS_ENABLED(CONFIG_MODBUS_SERIAL)) {
|
|
modbus_serial_rx_disable(ctx);
|
|
ctx->rx_adu_err = modbus_serial_rx_adu(ctx);
|
|
}
|
|
break;
|
|
case MODBUS_MODE_RAW:
|
|
if (IS_ENABLED(CONFIG_MODBUS_RAW_ADU)) {
|
|
ctx->rx_adu_err = modbus_raw_rx_adu(ctx);
|
|
}
|
|
break;
|
|
default:
|
|
LOG_ERR("Unknown MODBUS mode");
|
|
return;
|
|
}
|
|
|
|
if (ctx->client == true) {
|
|
k_sem_give(&ctx->client_wait_sem);
|
|
} else if (IS_ENABLED(CONFIG_MODBUS_SERVER)) {
|
|
bool respond = modbus_server_handler(ctx);
|
|
|
|
if (respond) {
|
|
modbus_tx_adu(ctx);
|
|
} else {
|
|
LOG_DBG("Server has dropped frame");
|
|
}
|
|
|
|
switch (ctx->mode) {
|
|
case MODBUS_MODE_RTU:
|
|
case MODBUS_MODE_ASCII:
|
|
if (IS_ENABLED(CONFIG_MODBUS_SERIAL) &&
|
|
respond == false) {
|
|
modbus_serial_rx_enable(ctx);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void modbus_tx_adu(struct modbus_context *ctx)
|
|
{
|
|
switch (ctx->mode) {
|
|
case MODBUS_MODE_RTU:
|
|
case MODBUS_MODE_ASCII:
|
|
if (IS_ENABLED(CONFIG_MODBUS_SERIAL) &&
|
|
modbus_serial_tx_adu(ctx)) {
|
|
LOG_ERR("Unsupported MODBUS serial mode");
|
|
}
|
|
break;
|
|
case MODBUS_MODE_RAW:
|
|
if (IS_ENABLED(CONFIG_MODBUS_RAW_ADU) &&
|
|
modbus_raw_tx_adu(ctx)) {
|
|
LOG_ERR("Unsupported MODBUS raw mode");
|
|
}
|
|
break;
|
|
default:
|
|
LOG_ERR("Unknown MODBUS mode");
|
|
}
|
|
}
|
|
|
|
int modbus_tx_wait_rx_adu(struct modbus_context *ctx)
|
|
{
|
|
modbus_tx_adu(ctx);
|
|
|
|
if (k_sem_take(&ctx->client_wait_sem, K_USEC(ctx->rxwait_to)) != 0) {
|
|
LOG_WRN("Client wait-for-RX timeout");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return ctx->rx_adu_err;
|
|
}
|
|
|
|
struct modbus_context *modbus_get_context(const uint8_t iface)
|
|
{
|
|
struct modbus_context *ctx;
|
|
|
|
if (iface >= ARRAY_SIZE(mb_ctx_tbl)) {
|
|
LOG_ERR("Interface %u not available", iface);
|
|
return NULL;
|
|
}
|
|
|
|
ctx = &mb_ctx_tbl[iface];
|
|
|
|
if (!atomic_test_bit(&ctx->state, MODBUS_STATE_CONFIGURED)) {
|
|
LOG_ERR("Interface not configured");
|
|
return NULL;
|
|
}
|
|
|
|
return ctx;
|
|
}
|
|
|
|
int modbus_iface_get_by_ctx(const struct modbus_context *ctx)
|
|
{
|
|
for (int i = 0; i < ARRAY_SIZE(mb_ctx_tbl); i++) {
|
|
if (&mb_ctx_tbl[i] == ctx) {
|
|
return i;
|
|
}
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
int modbus_iface_get_by_name(const char *iface_name)
|
|
{
|
|
for (int i = 0; i < ARRAY_SIZE(mb_ctx_tbl); i++) {
|
|
if (strcmp(iface_name, mb_ctx_tbl[i].iface_name) == 0) {
|
|
return i;
|
|
}
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static struct modbus_context *modbus_init_iface(const uint8_t iface)
|
|
{
|
|
struct modbus_context *ctx;
|
|
|
|
if (iface >= ARRAY_SIZE(mb_ctx_tbl)) {
|
|
LOG_ERR("Interface %u not available", iface);
|
|
return NULL;
|
|
}
|
|
|
|
ctx = &mb_ctx_tbl[iface];
|
|
|
|
if (atomic_test_and_set_bit(&ctx->state, MODBUS_STATE_CONFIGURED)) {
|
|
LOG_ERR("Interface already used");
|
|
return NULL;
|
|
}
|
|
|
|
k_mutex_init(&ctx->iface_lock);
|
|
k_sem_init(&ctx->client_wait_sem, 0, 1);
|
|
k_work_init(&ctx->server_work, modbus_rx_handler);
|
|
|
|
return ctx;
|
|
}
|
|
|
|
int modbus_init_server(const int iface, struct modbus_iface_param param)
|
|
{
|
|
struct modbus_context *ctx = NULL;
|
|
int rc = 0;
|
|
|
|
if (!IS_ENABLED(CONFIG_MODBUS_SERVER)) {
|
|
LOG_ERR("Modbus server support is not enabled");
|
|
rc = -ENOTSUP;
|
|
goto init_server_error;
|
|
}
|
|
|
|
if (param.server.user_cb == NULL) {
|
|
LOG_ERR("User callbacks should be available");
|
|
rc = -EINVAL;
|
|
goto init_server_error;
|
|
}
|
|
|
|
ctx = modbus_init_iface(iface);
|
|
if (ctx == NULL) {
|
|
rc = -EINVAL;
|
|
goto init_server_error;
|
|
}
|
|
|
|
switch (param.mode) {
|
|
case MODBUS_MODE_RTU:
|
|
case MODBUS_MODE_ASCII:
|
|
if (IS_ENABLED(CONFIG_MODBUS_SERIAL) &&
|
|
modbus_serial_init(ctx, param) != 0) {
|
|
LOG_ERR("Failed to init MODBUS over serial line");
|
|
rc = -EINVAL;
|
|
goto init_server_error;
|
|
}
|
|
break;
|
|
case MODBUS_MODE_RAW:
|
|
if (IS_ENABLED(CONFIG_MODBUS_RAW_ADU) &&
|
|
modbus_raw_init(ctx, param) != 0) {
|
|
LOG_ERR("Failed to init MODBUS raw ADU support");
|
|
rc = -EINVAL;
|
|
goto init_server_error;
|
|
}
|
|
break;
|
|
default:
|
|
LOG_ERR("Unknown MODBUS mode");
|
|
rc = -ENOTSUP;
|
|
goto init_server_error;
|
|
}
|
|
|
|
ctx->client = false;
|
|
ctx->unit_id = param.server.unit_id;
|
|
ctx->mbs_user_cb = param.server.user_cb;
|
|
if (IS_ENABLED(CONFIG_MODBUS_FC08_DIAGNOSTIC)) {
|
|
modbus_reset_stats(ctx);
|
|
}
|
|
|
|
LOG_DBG("Modbus interface %s initialized", ctx->iface_name);
|
|
|
|
return 0;
|
|
|
|
init_server_error:
|
|
if (ctx != NULL) {
|
|
atomic_clear_bit(&ctx->state, MODBUS_STATE_CONFIGURED);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
int modbus_init_client(const int iface, struct modbus_iface_param param)
|
|
{
|
|
struct modbus_context *ctx = NULL;
|
|
int rc = 0;
|
|
|
|
if (!IS_ENABLED(CONFIG_MODBUS_CLIENT)) {
|
|
LOG_ERR("Modbus client support is not enabled");
|
|
rc = -ENOTSUP;
|
|
goto init_client_error;
|
|
}
|
|
|
|
ctx = modbus_init_iface(iface);
|
|
if (ctx == NULL) {
|
|
rc = -EINVAL;
|
|
goto init_client_error;
|
|
}
|
|
|
|
switch (param.mode) {
|
|
case MODBUS_MODE_RTU:
|
|
case MODBUS_MODE_ASCII:
|
|
if (IS_ENABLED(CONFIG_MODBUS_SERIAL) &&
|
|
modbus_serial_init(ctx, param) != 0) {
|
|
LOG_ERR("Failed to init MODBUS over serial line");
|
|
rc = -EINVAL;
|
|
goto init_client_error;
|
|
}
|
|
break;
|
|
case MODBUS_MODE_RAW:
|
|
if (IS_ENABLED(CONFIG_MODBUS_RAW_ADU) &&
|
|
modbus_raw_init(ctx, param) != 0) {
|
|
LOG_ERR("Failed to init MODBUS raw ADU support");
|
|
rc = -EINVAL;
|
|
goto init_client_error;
|
|
}
|
|
break;
|
|
default:
|
|
LOG_ERR("Unknown MODBUS mode");
|
|
rc = -ENOTSUP;
|
|
goto init_client_error;
|
|
}
|
|
|
|
ctx->client = true;
|
|
ctx->unit_id = 0;
|
|
ctx->mbs_user_cb = NULL;
|
|
ctx->rxwait_to = param.rx_timeout;
|
|
|
|
return 0;
|
|
|
|
init_client_error:
|
|
if (ctx != NULL) {
|
|
atomic_clear_bit(&ctx->state, MODBUS_STATE_CONFIGURED);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
int modbus_disable(const uint8_t iface)
|
|
{
|
|
struct modbus_context *ctx;
|
|
|
|
ctx = modbus_get_context(iface);
|
|
if (ctx == NULL) {
|
|
LOG_ERR("Interface %u not initialized", iface);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (ctx->mode) {
|
|
case MODBUS_MODE_RTU:
|
|
case MODBUS_MODE_ASCII:
|
|
if (IS_ENABLED(CONFIG_MODBUS_SERIAL)) {
|
|
modbus_serial_disable(ctx);
|
|
}
|
|
break;
|
|
case MODBUS_MODE_RAW:
|
|
break;
|
|
default:
|
|
LOG_ERR("Unknown MODBUS mode");
|
|
}
|
|
|
|
ctx->rxwait_to = 0;
|
|
ctx->unit_id = 0;
|
|
ctx->mode = MODBUS_MODE_RTU;
|
|
ctx->mbs_user_cb = NULL;
|
|
atomic_clear_bit(&ctx->state, MODBUS_STATE_CONFIGURED);
|
|
|
|
LOG_INF("Modbus interface %u disabled", iface);
|
|
|
|
return 0;
|
|
}
|