273 lines
6.9 KiB
C
273 lines
6.9 KiB
C
/*
|
|
* Copyright (c) 2018, Nordic Semiconductor ASA
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
|
|
#include <drivers/i2c.h>
|
|
#include <dt-bindings/i2c/i2c.h>
|
|
#include <nrfx_twim.h>
|
|
|
|
#include <logging/log.h>
|
|
LOG_MODULE_REGISTER(i2c_nrfx_twim, CONFIG_I2C_LOG_LEVEL);
|
|
|
|
struct i2c_nrfx_twim_data {
|
|
struct k_sem transfer_sync;
|
|
struct k_sem completion_sync;
|
|
volatile nrfx_err_t res;
|
|
uint32_t dev_config;
|
|
#ifdef CONFIG_DEVICE_POWER_MANAGEMENT
|
|
uint32_t pm_state;
|
|
#endif
|
|
};
|
|
|
|
struct i2c_nrfx_twim_config {
|
|
nrfx_twim_t twim;
|
|
nrfx_twim_config_t config;
|
|
};
|
|
|
|
static inline struct i2c_nrfx_twim_data *get_dev_data(struct device *dev)
|
|
{
|
|
return dev->driver_data;
|
|
}
|
|
|
|
static inline
|
|
const struct i2c_nrfx_twim_config *get_dev_config(struct device *dev)
|
|
{
|
|
return dev->config_info;
|
|
}
|
|
|
|
static int i2c_nrfx_twim_transfer(struct device *dev, struct i2c_msg *msgs,
|
|
uint8_t num_msgs, uint16_t addr)
|
|
{
|
|
int ret = 0;
|
|
|
|
k_sem_take(&(get_dev_data(dev)->transfer_sync), K_FOREVER);
|
|
nrfx_twim_enable(&get_dev_config(dev)->twim);
|
|
|
|
for (size_t i = 0; i < num_msgs; i++) {
|
|
if (I2C_MSG_ADDR_10_BITS & msgs[i].flags) {
|
|
ret = -ENOTSUP;
|
|
break;
|
|
}
|
|
|
|
nrfx_twim_xfer_desc_t cur_xfer = {
|
|
.p_primary_buf = msgs[i].buf,
|
|
.primary_length = msgs[i].len,
|
|
.address = addr,
|
|
.type = (msgs[i].flags & I2C_MSG_READ) ?
|
|
NRFX_TWIM_XFER_RX : NRFX_TWIM_XFER_TX
|
|
};
|
|
|
|
nrfx_err_t res = nrfx_twim_xfer(&get_dev_config(dev)->twim,
|
|
&cur_xfer,
|
|
(msgs[i].flags & I2C_MSG_STOP) ?
|
|
0 : NRFX_TWIM_FLAG_TX_NO_STOP);
|
|
if (res != NRFX_SUCCESS) {
|
|
if (res == NRFX_ERROR_BUSY) {
|
|
ret = -EBUSY;
|
|
break;
|
|
} else {
|
|
ret = -EIO;
|
|
break;
|
|
}
|
|
}
|
|
|
|
k_sem_take(&(get_dev_data(dev)->completion_sync), K_FOREVER);
|
|
res = get_dev_data(dev)->res;
|
|
if (res != NRFX_SUCCESS) {
|
|
LOG_ERR("Error %d occurred for message %d", res, i);
|
|
ret = -EIO;
|
|
break;
|
|
}
|
|
}
|
|
|
|
nrfx_twim_disable(&get_dev_config(dev)->twim);
|
|
k_sem_give(&(get_dev_data(dev)->transfer_sync));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void event_handler(nrfx_twim_evt_t const *p_event, void *p_context)
|
|
{
|
|
struct device *dev = p_context;
|
|
struct i2c_nrfx_twim_data *dev_data = get_dev_data(dev);
|
|
|
|
switch (p_event->type) {
|
|
case NRFX_TWIM_EVT_DONE:
|
|
dev_data->res = NRFX_SUCCESS;
|
|
break;
|
|
case NRFX_TWIM_EVT_ADDRESS_NACK:
|
|
dev_data->res = NRFX_ERROR_DRV_TWI_ERR_ANACK;
|
|
break;
|
|
case NRFX_TWIM_EVT_DATA_NACK:
|
|
dev_data->res = NRFX_ERROR_DRV_TWI_ERR_DNACK;
|
|
break;
|
|
default:
|
|
dev_data->res = NRFX_ERROR_INTERNAL;
|
|
break;
|
|
}
|
|
|
|
k_sem_give(&dev_data->completion_sync);
|
|
}
|
|
|
|
static int i2c_nrfx_twim_configure(struct device *dev, uint32_t dev_config)
|
|
{
|
|
nrfx_twim_t const *inst = &(get_dev_config(dev)->twim);
|
|
|
|
if (I2C_ADDR_10_BITS & dev_config) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (I2C_SPEED_GET(dev_config)) {
|
|
case I2C_SPEED_STANDARD:
|
|
nrf_twim_frequency_set(inst->p_twim, NRF_TWIM_FREQ_100K);
|
|
break;
|
|
case I2C_SPEED_FAST:
|
|
nrf_twim_frequency_set(inst->p_twim, NRF_TWIM_FREQ_400K);
|
|
break;
|
|
default:
|
|
LOG_ERR("unsupported speed");
|
|
return -EINVAL;
|
|
}
|
|
get_dev_data(dev)->dev_config = dev_config;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_driver_api i2c_nrfx_twim_driver_api = {
|
|
.configure = i2c_nrfx_twim_configure,
|
|
.transfer = i2c_nrfx_twim_transfer,
|
|
};
|
|
|
|
static int init_twim(struct device *dev)
|
|
{
|
|
nrfx_err_t result = nrfx_twim_init(&get_dev_config(dev)->twim,
|
|
&get_dev_config(dev)->config,
|
|
event_handler,
|
|
dev);
|
|
if (result != NRFX_SUCCESS) {
|
|
LOG_ERR("Failed to initialize device: %s",
|
|
dev->name);
|
|
return -EBUSY;
|
|
}
|
|
|
|
#ifdef CONFIG_DEVICE_POWER_MANAGEMENT
|
|
get_dev_data(dev)->pm_state = DEVICE_PM_ACTIVE_STATE;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DEVICE_POWER_MANAGEMENT
|
|
static int twim_nrfx_pm_control(struct device *dev, uint32_t ctrl_command,
|
|
void *context, device_pm_cb cb, void *arg)
|
|
{
|
|
int ret = 0;
|
|
uint32_t pm_current_state = get_dev_data(dev)->pm_state;
|
|
|
|
if (ctrl_command == DEVICE_PM_SET_POWER_STATE) {
|
|
uint32_t new_state = *((const uint32_t *)context);
|
|
|
|
if (new_state != pm_current_state) {
|
|
switch (new_state) {
|
|
case DEVICE_PM_ACTIVE_STATE:
|
|
init_twim(dev);
|
|
if (get_dev_data(dev)->dev_config) {
|
|
i2c_nrfx_twim_configure(
|
|
dev,
|
|
get_dev_data(dev)->dev_config);
|
|
}
|
|
break;
|
|
|
|
case DEVICE_PM_LOW_POWER_STATE:
|
|
case DEVICE_PM_SUSPEND_STATE:
|
|
case DEVICE_PM_OFF_STATE:
|
|
if (pm_current_state != DEVICE_PM_ACTIVE_STATE) {
|
|
break;
|
|
}
|
|
nrfx_twim_uninit(&get_dev_config(dev)->twim);
|
|
break;
|
|
|
|
default:
|
|
ret = -ENOTSUP;
|
|
}
|
|
if (!ret) {
|
|
get_dev_data(dev)->pm_state = new_state;
|
|
}
|
|
}
|
|
} else {
|
|
__ASSERT_NO_MSG(ctrl_command == DEVICE_PM_GET_POWER_STATE);
|
|
*((uint32_t *)context) = get_dev_data(dev)->pm_state;
|
|
}
|
|
|
|
if (cb) {
|
|
cb(dev, ret, context, arg);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_DEVICE_POWER_MANAGEMENT */
|
|
|
|
#define I2C_NRFX_TWIM_INVALID_FREQUENCY ((nrf_twim_frequency_t)-1)
|
|
#define I2C_NRFX_TWIM_FREQUENCY(bitrate) \
|
|
(bitrate == I2C_BITRATE_STANDARD ? NRF_TWIM_FREQ_100K \
|
|
: bitrate == 250000 ? NRF_TWIM_FREQ_250K \
|
|
: bitrate == I2C_BITRATE_FAST ? NRF_TWIM_FREQ_400K \
|
|
: I2C_NRFX_TWIM_INVALID_FREQUENCY)
|
|
|
|
#define I2C(idx) DT_NODELABEL(i2c##idx)
|
|
#define I2C_FREQUENCY(idx) \
|
|
I2C_NRFX_TWIM_FREQUENCY(DT_PROP(I2C(idx), clock_frequency))
|
|
|
|
#define I2C_NRFX_TWIM_DEVICE(idx) \
|
|
BUILD_ASSERT(I2C_FREQUENCY(idx) != \
|
|
I2C_NRFX_TWIM_INVALID_FREQUENCY, \
|
|
"Wrong I2C " #idx " frequency setting in dts"); \
|
|
static int twim_##idx##_init(struct device *dev) \
|
|
{ \
|
|
IRQ_CONNECT(DT_IRQN(I2C(idx)), DT_IRQ(I2C(idx), priority), \
|
|
nrfx_isr, nrfx_twim_##idx##_irq_handler, 0); \
|
|
return init_twim(dev); \
|
|
} \
|
|
static struct i2c_nrfx_twim_data twim_##idx##_data = { \
|
|
.transfer_sync = Z_SEM_INITIALIZER( \
|
|
twim_##idx##_data.transfer_sync, 1, 1), \
|
|
.completion_sync = Z_SEM_INITIALIZER( \
|
|
twim_##idx##_data.completion_sync, 0, 1) \
|
|
}; \
|
|
static const struct i2c_nrfx_twim_config twim_##idx##z_config = { \
|
|
.twim = NRFX_TWIM_INSTANCE(idx), \
|
|
.config = { \
|
|
.scl = DT_PROP(I2C(idx), scl_pin), \
|
|
.sda = DT_PROP(I2C(idx), sda_pin), \
|
|
.frequency = I2C_FREQUENCY(idx), \
|
|
} \
|
|
}; \
|
|
DEVICE_DEFINE(twim_##idx, \
|
|
DT_LABEL(I2C(idx)), \
|
|
twim_##idx##_init, \
|
|
twim_nrfx_pm_control, \
|
|
&twim_##idx##_data, \
|
|
&twim_##idx##z_config, \
|
|
POST_KERNEL, \
|
|
CONFIG_I2C_INIT_PRIORITY, \
|
|
&i2c_nrfx_twim_driver_api)
|
|
|
|
#ifdef CONFIG_I2C_0_NRF_TWIM
|
|
I2C_NRFX_TWIM_DEVICE(0);
|
|
#endif
|
|
|
|
#ifdef CONFIG_I2C_1_NRF_TWIM
|
|
I2C_NRFX_TWIM_DEVICE(1);
|
|
#endif
|
|
|
|
#ifdef CONFIG_I2C_2_NRF_TWIM
|
|
I2C_NRFX_TWIM_DEVICE(2);
|
|
#endif
|
|
|
|
#ifdef CONFIG_I2C_3_NRF_TWIM
|
|
I2C_NRFX_TWIM_DEVICE(3);
|
|
#endif
|