72 lines
1.9 KiB
Plaintext
72 lines
1.9 KiB
Plaintext
# Kconfig - HDC1008 temperature and humidity sensor configuration options
|
|
|
|
#
|
|
# Copyright (c) 2016 Intel Corporation
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
#
|
|
|
|
menuconfig HDC1008
|
|
bool
|
|
prompt "HDC1008 Temperature and Humidity Sensor"
|
|
depends on SENSOR && I2C && GPIO
|
|
default n
|
|
help
|
|
Enable driver for HDC1008 temperature and humidity sensors.
|
|
|
|
config HDC1008_NAME
|
|
string
|
|
prompt "Driver name"
|
|
default "HDC1008"
|
|
depends on HDC1008
|
|
help
|
|
Device name with which the HDC1008 sensor is identified.
|
|
|
|
config HDC1008_I2C_ADDR
|
|
hex
|
|
prompt "I2C Address for HDC1008"
|
|
depends on HDC1008
|
|
default "0x40"
|
|
help
|
|
0x40: A0 connected GND and A1 connected to GND.
|
|
0x41: A0 connected VDD and A1 connected to GND.
|
|
0x42: A0 connected GND and A1 connected to VDD.
|
|
0x43: A0 connected VDD and A1 connected to VDD.
|
|
|
|
config HDC1008_I2C_MASTER_DEV_NAME
|
|
string
|
|
prompt "I2C master where HDC1008 is connected"
|
|
depends on HDC1008
|
|
default "I2C_0"
|
|
help
|
|
Specify the device name of the I2C master device to which the
|
|
HDC1008 chip is connected.
|
|
|
|
config HDC1008_GPIO_DEV_NAME
|
|
string
|
|
prompt "GPIO device"
|
|
default "GPIO_0"
|
|
depends on HDC1008
|
|
help
|
|
The device name of the GPIO device to which the HDC1008 data-ready
|
|
pin is connected.
|
|
|
|
config HDC1008_GPIO_PIN_NUM
|
|
int
|
|
prompt "Interrupt GPIO pin number"
|
|
default 0
|
|
depends on HDC1008
|
|
help
|
|
The number of the GPIO on which the data-ready signal from the HDC1008
|
|
chip will be received.
|