277 lines
7.5 KiB
C
277 lines
7.5 KiB
C
/*
|
|
* Copyright (c) 2017 Jan Van Winkel <jan.van_winkel@dxplore.eu>
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include "display_ili9340.h"
|
|
#include <display.h>
|
|
|
|
#define LOG_LEVEL CONFIG_DISPLAY_LOG_LEVEL
|
|
#include <logging/log.h>
|
|
LOG_MODULE_REGISTER(display_ili9340);
|
|
|
|
#include <gpio.h>
|
|
#include <misc/byteorder.h>
|
|
#include <spi.h>
|
|
#include <string.h>
|
|
|
|
struct ili9340_data {
|
|
struct device *reset_gpio;
|
|
struct device *command_data_gpio;
|
|
struct device *spi_dev;
|
|
struct spi_config spi_config;
|
|
#ifdef CONFIG_ILI9340_GPIO_CS
|
|
struct spi_cs_control cs_ctrl;
|
|
#endif
|
|
};
|
|
|
|
#define ILI9340_CMD_DATA_PIN_COMMAND 0
|
|
#define ILI9340_CMD_DATA_PIN_DATA 1
|
|
|
|
static void ili9340_exit_sleep(struct ili9340_data *data)
|
|
{
|
|
ili9340_transmit(data, ILI9340_CMD_EXIT_SLEEP, NULL, 0);
|
|
k_sleep(120);
|
|
}
|
|
|
|
static int ili9340_init(struct device *dev)
|
|
{
|
|
struct ili9340_data *data = (struct ili9340_data *)dev->driver_data;
|
|
|
|
LOG_DBG("Initializing display driver");
|
|
|
|
data->spi_dev = device_get_binding(DT_ILI9340_SPI_DEV_NAME);
|
|
if (data->spi_dev == NULL) {
|
|
LOG_ERR("Could not get SPI device for ILI9340");
|
|
return -EPERM;
|
|
}
|
|
|
|
data->spi_config.frequency = DT_ILI9340_SPI_FREQ;
|
|
data->spi_config.operation = SPI_OP_MODE_MASTER | SPI_WORD_SET(8);
|
|
data->spi_config.slave = DT_ILI9340_SPI_SLAVE_NUMBER;
|
|
|
|
#ifdef CONFIG_ILI9340_GPIO_CS
|
|
data->cs_ctrl.gpio_dev =
|
|
device_get_binding(CONFIG_ILI9340_CS_GPIO_PORT_NAME);
|
|
data->cs_ctrl.gpio_pin = CONFIG_ILI9340_CS_GPIO_PIN;
|
|
data->cs_ctrl.delay = 0;
|
|
data->spi_config.cs = &(data->cs_ctrl);
|
|
#else
|
|
data->spi_config.cs = NULL;
|
|
#endif
|
|
|
|
data->reset_gpio =
|
|
device_get_binding(DT_ILI9340_RESET_GPIO_PORT_NAME);
|
|
if (data->reset_gpio == NULL) {
|
|
LOG_ERR("Could not get GPIO port for ILI9340 reset");
|
|
return -EPERM;
|
|
}
|
|
|
|
gpio_pin_configure(data->reset_gpio, DT_ILI9340_RESET_PIN,
|
|
GPIO_DIR_OUT);
|
|
|
|
data->command_data_gpio =
|
|
device_get_binding(DT_ILI9340_CMD_DATA_GPIO_PORT_NAME);
|
|
if (data->command_data_gpio == NULL) {
|
|
LOG_ERR("Could not get GPIO port for ILI9340 command/data");
|
|
return -EPERM;
|
|
}
|
|
|
|
gpio_pin_configure(data->command_data_gpio, DT_ILI9340_CMD_DATA_PIN,
|
|
GPIO_DIR_OUT);
|
|
|
|
LOG_DBG("Resetting display driver");
|
|
gpio_pin_write(data->reset_gpio, DT_ILI9340_RESET_PIN, 1);
|
|
k_sleep(1);
|
|
gpio_pin_write(data->reset_gpio, DT_ILI9340_RESET_PIN, 0);
|
|
k_sleep(1);
|
|
gpio_pin_write(data->reset_gpio, DT_ILI9340_RESET_PIN, 1);
|
|
k_sleep(5);
|
|
|
|
LOG_DBG("Initializing LCD");
|
|
ili9340_lcd_init(data);
|
|
|
|
LOG_DBG("Exiting sleep mode");
|
|
ili9340_exit_sleep(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ili9340_set_mem_area(struct ili9340_data *data, const u16_t x,
|
|
const u16_t y, const u16_t w, const u16_t h)
|
|
{
|
|
u16_t spi_data[2];
|
|
|
|
spi_data[0] = sys_cpu_to_be16(x);
|
|
spi_data[1] = sys_cpu_to_be16(x + w - 1);
|
|
ili9340_transmit(data, ILI9340_CMD_COLUMN_ADDR, &spi_data[0], 4);
|
|
|
|
spi_data[0] = sys_cpu_to_be16(y);
|
|
spi_data[1] = sys_cpu_to_be16(y + h - 1);
|
|
ili9340_transmit(data, ILI9340_CMD_PAGE_ADDR, &spi_data[0], 4);
|
|
}
|
|
|
|
static int ili9340_write(const struct device *dev, const u16_t x,
|
|
const u16_t y,
|
|
const struct display_buffer_descriptor *desc,
|
|
const void *buf)
|
|
{
|
|
struct ili9340_data *data = (struct ili9340_data *)dev->driver_data;
|
|
const u8_t *write_data_start = (u8_t *) buf;
|
|
struct spi_buf tx_buf;
|
|
struct spi_buf_set tx_bufs;
|
|
u16_t write_cnt;
|
|
u16_t nbr_of_writes;
|
|
u16_t write_h;
|
|
|
|
__ASSERT(desc->width <= desc->pitch, "Pitch is smaller then width");
|
|
__ASSERT((3 * desc->pitch * desc->height) <= desc->bu_size,
|
|
"Input buffer to small");
|
|
|
|
LOG_DBG("Writing %dx%d (w,h) @ %dx%d (x,y)", desc->width, desc->height,
|
|
x, y);
|
|
ili9340_set_mem_area(data, x, y, desc->width, desc->height);
|
|
|
|
if (desc->pitch > desc->width) {
|
|
write_h = 1;
|
|
nbr_of_writes = desc->height;
|
|
} else {
|
|
write_h = desc->height;
|
|
nbr_of_writes = 1;
|
|
}
|
|
|
|
ili9340_transmit(data, ILI9340_CMD_MEM_WRITE,
|
|
(void *) write_data_start, 3 * desc->width * write_h);
|
|
|
|
tx_bufs.buffers = &tx_buf;
|
|
tx_bufs.count = 1;
|
|
|
|
write_data_start += (3 * desc->pitch);
|
|
for (write_cnt = 1; write_cnt < nbr_of_writes; ++write_cnt) {
|
|
tx_buf.buf = (void *)write_data_start;
|
|
tx_buf.len = 3 * desc->width * write_h;
|
|
spi_write(data->spi_dev, &data->spi_config, &tx_bufs);
|
|
write_data_start += (3 * desc->pitch);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ili9340_read(const struct device *dev, const u16_t x,
|
|
const u16_t y,
|
|
const struct display_buffer_descriptor *desc,
|
|
void *buf)
|
|
{
|
|
LOG_ERR("Reading not supported");
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static void *ili9340_get_framebuffer(const struct device *dev)
|
|
{
|
|
LOG_ERR("Direct framebuffer access not supported");
|
|
return NULL;
|
|
}
|
|
|
|
static int ili9340_display_blanking_off(const struct device *dev)
|
|
{
|
|
struct ili9340_data *data = (struct ili9340_data *)dev->driver_data;
|
|
|
|
LOG_DBG("Turning display blanking off");
|
|
ili9340_transmit(data, ILI9340_CMD_DISPLAY_ON, NULL, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int ili9340_display_blanking_on(const struct device *dev)
|
|
{
|
|
struct ili9340_data *data = (struct ili9340_data *)dev->driver_data;
|
|
|
|
LOG_DBG("Turning display blanking on");
|
|
ili9340_transmit(data, ILI9340_CMD_DISPLAY_OFF, NULL, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int ili9340_set_brightness(const struct device *dev,
|
|
const u8_t brightness)
|
|
{
|
|
LOG_WRN("Set brightness not implemented");
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static int ili9340_set_contrast(const struct device *dev, const u8_t contrast)
|
|
{
|
|
LOG_ERR("Set contrast not supported");
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static int ili9340_set_pixel_format(const struct device *dev,
|
|
const enum display_pixel_format
|
|
pixel_format)
|
|
{
|
|
if (pixel_format == PIXEL_FORMAT_RGB_888) {
|
|
return 0;
|
|
}
|
|
LOG_ERR("Pixel format change not implemented");
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static int ili9340_set_orientation(const struct device *dev,
|
|
const enum display_orientation orientation)
|
|
{
|
|
if (orientation == DISPLAY_ORIENTATION_NORMAL) {
|
|
return 0;
|
|
}
|
|
LOG_ERR("Changing display orientation not implemented");
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
static void ili9340_get_capabilities(const struct device *dev,
|
|
struct display_capabilities *capabilities)
|
|
{
|
|
memset(capabilities, 0, sizeof(struct display_capabilities));
|
|
capabilities->x_resolution = 320;
|
|
capabilities->y_resolution = 240;
|
|
capabilities->supported_pixel_formats = PIXEL_FORMAT_RGB_888;
|
|
capabilities->current_pixel_format = PIXEL_FORMAT_RGB_888;
|
|
capabilities->current_orientation = DISPLAY_ORIENTATION_NORMAL;
|
|
}
|
|
|
|
void ili9340_transmit(struct ili9340_data *data, u8_t cmd, void *tx_data,
|
|
size_t tx_len)
|
|
{
|
|
struct spi_buf tx_buf = { .buf = &cmd, .len = 1 };
|
|
struct spi_buf_set tx_bufs = { .buffers = &tx_buf, .count = 1 };
|
|
|
|
gpio_pin_write(data->command_data_gpio, DT_ILI9340_CMD_DATA_PIN,
|
|
ILI9340_CMD_DATA_PIN_COMMAND);
|
|
spi_write(data->spi_dev, &data->spi_config, &tx_bufs);
|
|
|
|
if (tx_data != NULL) {
|
|
tx_buf.buf = tx_data;
|
|
tx_buf.len = tx_len;
|
|
gpio_pin_write(data->command_data_gpio,
|
|
DT_ILI9340_CMD_DATA_PIN,
|
|
ILI9340_CMD_DATA_PIN_DATA);
|
|
spi_write(data->spi_dev, &data->spi_config, &tx_bufs);
|
|
}
|
|
}
|
|
|
|
static const struct display_driver_api ili9340_api = {
|
|
.blanking_on = ili9340_display_blanking_on,
|
|
.blanking_off = ili9340_display_blanking_off,
|
|
.write = ili9340_write,
|
|
.read = ili9340_read,
|
|
.get_framebuffer = ili9340_get_framebuffer,
|
|
.set_brightness = ili9340_set_brightness,
|
|
.set_contrast = ili9340_set_contrast,
|
|
.get_capabilities = ili9340_get_capabilities,
|
|
.set_pixel_format = ili9340_set_pixel_format,
|
|
.set_orientation = ili9340_set_orientation,
|
|
};
|
|
|
|
static struct ili9340_data ili9340_data;
|
|
|
|
DEVICE_AND_API_INIT(ili9340, DT_ILI9340_DEV_NAME, &ili9340_init,
|
|
&ili9340_data, NULL, APPLICATION,
|
|
CONFIG_APPLICATION_INIT_PRIORITY, &ili9340_api);
|