427 lines
12 KiB
C
427 lines
12 KiB
C
/*
|
|
*
|
|
* Copyright (c) 2017 Linaro Limited.
|
|
* Copyright (c) 2017 RnDity Sp. z o.o.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <soc.h>
|
|
#include <soc_registers.h>
|
|
#include <clock_control.h>
|
|
#include <misc/util.h>
|
|
#include <clock_control/stm32_clock_control.h>
|
|
#include "stm32_ll_clock.h"
|
|
|
|
/* Macros to fill up prescaler values */
|
|
#define _ahb_prescaler(v) LL_RCC_SYSCLK_DIV_ ## v
|
|
#define ahb_prescaler(v) _ahb_prescaler(v)
|
|
|
|
#define _apb1_prescaler(v) LL_RCC_APB1_DIV_ ## v
|
|
#define apb1_prescaler(v) _apb1_prescaler(v)
|
|
|
|
#ifndef CONFIG_SOC_SERIES_STM32F0X
|
|
#define _apb2_prescaler(v) LL_RCC_APB2_DIV_ ## v
|
|
#define apb2_prescaler(v) _apb2_prescaler(v)
|
|
#endif /* CONFIG_SOC_SERIES_STM32F0X */
|
|
|
|
#define _mco1_prescaler(v) LL_RCC_MCO1_DIV_ ## v
|
|
#define mco1_prescaler(v) _mco1_prescaler(v)
|
|
|
|
#define _mco2_prescaler(v) LL_RCC_MCO2_DIV_ ## v
|
|
#define mco2_prescaler(v) _mco2_prescaler(v)
|
|
|
|
/**
|
|
* @brief fill in AHB/APB buses configuration structure
|
|
*/
|
|
static void config_bus_clk_init(LL_UTILS_ClkInitTypeDef *clk_init)
|
|
{
|
|
clk_init->AHBCLKDivider = ahb_prescaler(
|
|
CONFIG_CLOCK_STM32_AHB_PRESCALER);
|
|
clk_init->APB1CLKDivider = apb1_prescaler(
|
|
CONFIG_CLOCK_STM32_APB1_PRESCALER);
|
|
#ifndef CONFIG_SOC_SERIES_STM32F0X
|
|
clk_init->APB2CLKDivider = apb2_prescaler(
|
|
CONFIG_CLOCK_STM32_APB2_PRESCALER);
|
|
#endif /* CONFIG_SOC_SERIES_STM32F0X */
|
|
}
|
|
|
|
static u32_t get_bus_clock(u32_t clock, u32_t prescaler)
|
|
{
|
|
return clock / prescaler;
|
|
}
|
|
|
|
static inline int stm32_clock_control_on(struct device *dev,
|
|
clock_control_subsys_t sub_system)
|
|
{
|
|
struct stm32_pclken *pclken = (struct stm32_pclken *)(sub_system);
|
|
|
|
ARG_UNUSED(dev);
|
|
|
|
switch (pclken->bus) {
|
|
case STM32_CLOCK_BUS_AHB1:
|
|
LL_AHB1_GRP1_EnableClock(pclken->enr);
|
|
break;
|
|
#if defined(CONFIG_SOC_SERIES_STM32L4X) || \
|
|
defined(CONFIG_SOC_SERIES_STM32F4X) || \
|
|
defined(CONFIG_SOC_SERIES_STM32F7X) || \
|
|
defined(CONFIG_SOC_SERIES_STM32F2X)
|
|
case STM32_CLOCK_BUS_AHB2:
|
|
LL_AHB2_GRP1_EnableClock(pclken->enr);
|
|
break;
|
|
#endif /* CONFIG_SOC_SERIES_STM32L4X || CONFIG_SOC_SERIES_STM32F4X ||
|
|
CONFIG_SOC_SERIES_STM32F7X */
|
|
case STM32_CLOCK_BUS_APB1:
|
|
LL_APB1_GRP1_EnableClock(pclken->enr);
|
|
break;
|
|
#if defined(CONFIG_SOC_SERIES_STM32L4X) || defined(CONFIG_SOC_SERIES_STM32F0X)
|
|
case STM32_CLOCK_BUS_APB1_2:
|
|
LL_APB1_GRP2_EnableClock(pclken->enr);
|
|
break;
|
|
#endif /* CONFIG_SOC_SERIES_STM32L4X || CONFIG_SOC_SERIES_STM32F0X */
|
|
#ifndef CONFIG_SOC_SERIES_STM32F0X
|
|
case STM32_CLOCK_BUS_APB2:
|
|
LL_APB2_GRP1_EnableClock(pclken->enr);
|
|
break;
|
|
#endif /* CONFIG_SOC_SERIES_STM32F0X */
|
|
#ifdef CONFIG_SOC_SERIES_STM32L0X
|
|
case STM32_CLOCK_BUS_IOP:
|
|
LL_IOP_GRP1_EnableClock(pclken->enr);
|
|
break;
|
|
#endif /* CONFIG_SOC_SERIES_STM32L0X */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static inline int stm32_clock_control_off(struct device *dev,
|
|
clock_control_subsys_t sub_system)
|
|
{
|
|
struct stm32_pclken *pclken = (struct stm32_pclken *)(sub_system);
|
|
|
|
ARG_UNUSED(dev);
|
|
|
|
switch (pclken->bus) {
|
|
case STM32_CLOCK_BUS_AHB1:
|
|
LL_AHB1_GRP1_DisableClock(pclken->enr);
|
|
break;
|
|
#if defined(CONFIG_SOC_SERIES_STM32L4X) || \
|
|
defined(CONFIG_SOC_SERIES_STM32F4X) || \
|
|
defined(CONFIG_SOC_SERIES_STM32F7X) || \
|
|
defined(CONFIG_SOC_SERIES_STM32F2X)
|
|
case STM32_CLOCK_BUS_AHB2:
|
|
LL_AHB2_GRP1_DisableClock(pclken->enr);
|
|
break;
|
|
#endif /* CONFIG_SOC_SERIES_STM32L4X || CONFIG_SOC_SERIES_STM32F4X ||
|
|
CONFIG_SOC_SERIES_STM32F7X */
|
|
case STM32_CLOCK_BUS_APB1:
|
|
LL_APB1_GRP1_DisableClock(pclken->enr);
|
|
break;
|
|
#if defined(CONFIG_SOC_SERIES_STM32L4X) || defined(CONFIG_SOC_SERIES_STM32F0X)
|
|
case STM32_CLOCK_BUS_APB1_2:
|
|
LL_APB1_GRP2_DisableClock(pclken->enr);
|
|
break;
|
|
#endif /* CONFIG_SOC_SERIES_STM32L4X || CONFIG_SOC_SERIES_STM32F0X */
|
|
#ifndef CONFIG_SOC_SERIES_STM32F0X
|
|
case STM32_CLOCK_BUS_APB2:
|
|
LL_APB2_GRP1_DisableClock(pclken->enr);
|
|
break;
|
|
#endif /* CONFIG_SOC_SERIES_STM32F0X */
|
|
#ifdef CONFIG_SOC_SERIES_STM32L0X
|
|
case STM32_CLOCK_BUS_IOP:
|
|
LL_IOP_GRP1_DisableClock(pclken->enr);
|
|
break;
|
|
#endif /* CONFIG_SOC_SERIES_STM32L0X */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int stm32_clock_control_get_subsys_rate(struct device *clock,
|
|
clock_control_subsys_t sub_system,
|
|
u32_t *rate)
|
|
{
|
|
struct stm32_pclken *pclken = (struct stm32_pclken *)(sub_system);
|
|
/*
|
|
* Get AHB Clock (= SystemCoreClock = SYSCLK/prescaler)
|
|
* SystemCoreClock is preferred to CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC
|
|
* since it will be updated after clock configuration and hence
|
|
* more likely to contain actual clock speed
|
|
*/
|
|
u32_t ahb_clock = SystemCoreClock;
|
|
u32_t apb1_clock = get_bus_clock(ahb_clock,
|
|
CONFIG_CLOCK_STM32_APB1_PRESCALER);
|
|
#ifndef CONFIG_SOC_SERIES_STM32F0X
|
|
u32_t apb2_clock = get_bus_clock(ahb_clock,
|
|
CONFIG_CLOCK_STM32_APB2_PRESCALER);
|
|
#endif /* CONFIG_SOC_SERIES_STM32F0X */
|
|
|
|
ARG_UNUSED(clock);
|
|
|
|
switch (pclken->bus) {
|
|
case STM32_CLOCK_BUS_AHB1:
|
|
case STM32_CLOCK_BUS_AHB2:
|
|
#ifdef CONFIG_SOC_SERIES_STM32L0X
|
|
case STM32_CLOCK_BUS_IOP:
|
|
#endif /* CONFIG_SOC_SERIES_STM32L0X */
|
|
*rate = ahb_clock;
|
|
break;
|
|
case STM32_CLOCK_BUS_APB1:
|
|
#if defined(CONFIG_SOC_SERIES_STM32L4X) || defined(CONFIG_SOC_SERIES_STM32F0X)
|
|
case STM32_CLOCK_BUS_APB1_2:
|
|
#endif /* CONFIG_SOC_SERIES_STM32L4X || CONFIG_SOC_SERIES_STM32F0X */
|
|
*rate = apb1_clock;
|
|
break;
|
|
#ifndef CONFIG_SOC_SERIES_STM32F0X
|
|
case STM32_CLOCK_BUS_APB2:
|
|
*rate = apb2_clock;
|
|
break;
|
|
#endif /* CONFIG_SOC_SERIES_STM32F0X */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct clock_control_driver_api stm32_clock_control_api = {
|
|
.on = stm32_clock_control_on,
|
|
.off = stm32_clock_control_off,
|
|
.get_rate = stm32_clock_control_get_subsys_rate,
|
|
};
|
|
|
|
/*
|
|
* Unconditionally switch the system clock source to HSI.
|
|
*/
|
|
__unused
|
|
static void stm32_clock_switch_to_hsi(u32_t ahb_prescaler)
|
|
{
|
|
/* Enable HSI if not enabled */
|
|
if (LL_RCC_HSI_IsReady() != 1) {
|
|
/* Enable HSI */
|
|
LL_RCC_HSI_Enable();
|
|
while (LL_RCC_HSI_IsReady() != 1) {
|
|
/* Wait for HSI ready */
|
|
}
|
|
}
|
|
|
|
/* Set HSI as SYSCLCK source */
|
|
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_HSI);
|
|
LL_RCC_SetAHBPrescaler(ahb_prescaler);
|
|
while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSI) {
|
|
}
|
|
}
|
|
|
|
/*
|
|
* MCO configure doesn't active requested clock source,
|
|
* so please make sure the clock source was enabled.
|
|
*/
|
|
static inline void stm32_clock_control_mco_init(void)
|
|
{
|
|
#ifndef CONFIG_CLOCK_STM32_MCO1_SRC_NOCLOCK
|
|
LL_RCC_ConfigMCO(MCO1_SOURCE,
|
|
mco1_prescaler(CONFIG_CLOCK_STM32_MCO1_DIV));
|
|
#endif /* CONFIG_CLOCK_STM32_MCO1_SRC_NOCLOCK */
|
|
|
|
#ifndef CONFIG_CLOCK_STM32_MCO2_SRC_NOCLOCK
|
|
LL_RCC_ConfigMCO(MCO2_SOURCE,
|
|
mco2_prescaler(CONFIG_CLOCK_STM32_MCO2_DIV));
|
|
#endif /* CONFIG_CLOCK_STM32_MCO2_SRC_NOCLOCK */
|
|
}
|
|
|
|
static int stm32_clock_control_init(struct device *dev)
|
|
{
|
|
LL_UTILS_ClkInitTypeDef s_ClkInitStruct;
|
|
|
|
ARG_UNUSED(dev);
|
|
|
|
/* configure clock for AHB/APB buses */
|
|
config_bus_clk_init((LL_UTILS_ClkInitTypeDef *)&s_ClkInitStruct);
|
|
|
|
/* Some clocks would be activated by default */
|
|
config_enable_default_clocks();
|
|
|
|
#ifdef CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL
|
|
LL_UTILS_PLLInitTypeDef s_PLLInitStruct;
|
|
|
|
/* configure PLL input settings */
|
|
config_pll_init(&s_PLLInitStruct);
|
|
|
|
/*
|
|
* Switch to HSI and disable the PLL before configuration.
|
|
* (Switching to HSI makes sure we have a SYSCLK source in
|
|
* case we're currently running from the PLL we're about to
|
|
* turn off and reconfigure.)
|
|
*
|
|
* Don't use s_ClkInitStruct.AHBCLKDivider as the AHB
|
|
* prescaler here. In this configuration, that's the value to
|
|
* use when the SYSCLK source is the PLL, not HSI.
|
|
*/
|
|
stm32_clock_switch_to_hsi(LL_RCC_SYSCLK_DIV_1);
|
|
LL_RCC_PLL_Disable();
|
|
|
|
#ifdef CONFIG_CLOCK_STM32_PLL_Q_DIVISOR
|
|
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ,
|
|
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR
|
|
<< POSITION_VAL(RCC_PLLCFGR_PLLQ));
|
|
#endif /* CONFIG_CLOCK_STM32_PLL_Q_DIVISOR */
|
|
|
|
#ifdef CONFIG_CLOCK_STM32_PLL_SRC_MSI
|
|
/* Switch to PLL with MSI as clock source */
|
|
LL_PLL_ConfigSystemClock_MSI(&s_PLLInitStruct, &s_ClkInitStruct);
|
|
|
|
/* Disable other clocks */
|
|
LL_RCC_HSI_Disable();
|
|
LL_RCC_HSE_Disable();
|
|
|
|
#elif CONFIG_CLOCK_STM32_PLL_SRC_HSI
|
|
/* Switch to PLL with HSI as clock source */
|
|
LL_PLL_ConfigSystemClock_HSI(&s_PLLInitStruct, &s_ClkInitStruct);
|
|
|
|
/* Disable other clocks */
|
|
LL_RCC_HSE_Disable();
|
|
LL_RCC_MSI_Disable();
|
|
|
|
#elif CONFIG_CLOCK_STM32_PLL_SRC_HSE
|
|
int hse_bypass = LL_UTILS_HSEBYPASS_OFF;
|
|
|
|
#ifdef CONFIG_CLOCK_STM32_HSE_BYPASS
|
|
hse_bypass = LL_UTILS_HSEBYPASS_ON;
|
|
#endif /* CONFIG_CLOCK_STM32_HSE_BYPASS */
|
|
|
|
/* Switch to PLL with HSE as clock source */
|
|
LL_PLL_ConfigSystemClock_HSE(CONFIG_CLOCK_STM32_HSE_CLOCK, hse_bypass,
|
|
&s_PLLInitStruct,
|
|
&s_ClkInitStruct);
|
|
|
|
/* Disable other clocks */
|
|
LL_RCC_HSI_Disable();
|
|
LL_RCC_MSI_Disable();
|
|
|
|
#endif /* CONFIG_CLOCK_STM32_PLL_SRC_... */
|
|
|
|
#elif CONFIG_CLOCK_STM32_SYSCLK_SRC_HSE
|
|
|
|
/* Enable HSE if not enabled */
|
|
if (LL_RCC_HSE_IsReady() != 1) {
|
|
/* Check if need to enable HSE bypass feature or not */
|
|
#ifdef CONFIG_CLOCK_STM32_HSE_BYPASS
|
|
LL_RCC_HSE_EnableBypass();
|
|
#else
|
|
LL_RCC_HSE_DisableBypass();
|
|
#endif /* CONFIG_CLOCK_STM32_HSE_BYPASS */
|
|
|
|
/* Enable HSE */
|
|
LL_RCC_HSE_Enable();
|
|
while (LL_RCC_HSE_IsReady() != 1) {
|
|
/* Wait for HSE ready */
|
|
}
|
|
}
|
|
|
|
/* Set HSE as SYSCLCK source */
|
|
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_HSE);
|
|
LL_RCC_SetAHBPrescaler(s_ClkInitStruct.AHBCLKDivider);
|
|
while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSE) {
|
|
}
|
|
|
|
/* Update SystemCoreClock variable */
|
|
LL_SetSystemCoreClock(__LL_RCC_CALC_HCLK_FREQ(
|
|
CONFIG_CLOCK_STM32_HSE_CLOCK,
|
|
s_ClkInitStruct.AHBCLKDivider));
|
|
|
|
/* Set APB1 & APB2 prescaler*/
|
|
LL_RCC_SetAPB1Prescaler(s_ClkInitStruct.APB1CLKDivider);
|
|
#ifndef CONFIG_SOC_SERIES_STM32F0X
|
|
LL_RCC_SetAPB2Prescaler(s_ClkInitStruct.APB2CLKDivider);
|
|
#endif /* CONFIG_SOC_SERIES_STM32F0X */
|
|
|
|
/* Set flash latency */
|
|
/* HSI used as SYSCLK, set latency to 0 */
|
|
LL_FLASH_SetLatency(LL_FLASH_LATENCY_0);
|
|
|
|
/* Disable other clocks */
|
|
LL_RCC_HSI_Disable();
|
|
LL_RCC_MSI_Disable();
|
|
LL_RCC_PLL_Disable();
|
|
|
|
#elif CONFIG_CLOCK_STM32_SYSCLK_SRC_MSI
|
|
|
|
/* Set MSI Range */
|
|
LL_RCC_MSI_EnableRangeSelection();
|
|
LL_RCC_MSI_SetRange(CONFIG_CLOCK_STM32_MSI_RANGE << RCC_CR_MSIRANGE_Pos);
|
|
|
|
/* Enable MSI if not enabled */
|
|
if (LL_RCC_MSI_IsReady() != 1) {
|
|
/* Enable MSI */
|
|
LL_RCC_MSI_Enable();
|
|
while (LL_RCC_MSI_IsReady() != 1) {
|
|
/* Wait for HSI ready */
|
|
}
|
|
}
|
|
|
|
/* Set MSI as SYSCLCK source */
|
|
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_MSI);
|
|
LL_RCC_SetAHBPrescaler(s_ClkInitStruct.AHBCLKDivider);
|
|
while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_MSI) {
|
|
}
|
|
|
|
/* Update SystemCoreClock variable with MSI freq */
|
|
/* MSI freq is defined from RUN range selection */
|
|
LL_SetSystemCoreClock(__LL_RCC_CALC_MSI_FREQ(LL_RCC_MSIRANGESEL_RUN,
|
|
LL_RCC_MSI_GetRange()));
|
|
|
|
/* Set APB1 & APB2 prescaler*/
|
|
LL_RCC_SetAPB1Prescaler(s_ClkInitStruct.APB1CLKDivider);
|
|
LL_RCC_SetAPB2Prescaler(s_ClkInitStruct.APB2CLKDivider);
|
|
|
|
/* Set flash latency */
|
|
/* MSI used as SYSCLK (16MHz), set latency to 0 */
|
|
LL_FLASH_SetLatency(LL_FLASH_LATENCY_0);
|
|
|
|
/* Disable other clocks */
|
|
LL_RCC_HSE_Disable();
|
|
LL_RCC_HSI_Disable();
|
|
LL_RCC_PLL_Disable();
|
|
|
|
#elif CONFIG_CLOCK_STM32_SYSCLK_SRC_HSI
|
|
|
|
stm32_clock_switch_to_hsi(s_ClkInitStruct.AHBCLKDivider);
|
|
|
|
/* Update SystemCoreClock variable */
|
|
LL_SetSystemCoreClock(__LL_RCC_CALC_HCLK_FREQ(HSI_VALUE,
|
|
s_ClkInitStruct.AHBCLKDivider));
|
|
|
|
/* Set APB1 & APB2 prescaler*/
|
|
LL_RCC_SetAPB1Prescaler(s_ClkInitStruct.APB1CLKDivider);
|
|
#ifndef CONFIG_SOC_SERIES_STM32F0X
|
|
LL_RCC_SetAPB2Prescaler(s_ClkInitStruct.APB2CLKDivider);
|
|
#endif /* CONFIG_SOC_SERIES_STM32F0X */
|
|
|
|
/* Set flash latency */
|
|
/* HSI used as SYSCLK, set latency to 0 */
|
|
LL_FLASH_SetLatency(LL_FLASH_LATENCY_0);
|
|
|
|
/* Disable other clocks */
|
|
LL_RCC_HSE_Disable();
|
|
LL_RCC_MSI_Disable();
|
|
LL_RCC_PLL_Disable();
|
|
|
|
#endif /* CONFIG_CLOCK_STM32_SYSCLK_SRC_... */
|
|
|
|
/* configure MCO1/MCO2 based on Kconfig */
|
|
stm32_clock_control_mco_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* @brief RCC device, note that priority is intentionally set to 1 so
|
|
* that the device init runs just after SOC init
|
|
*/
|
|
DEVICE_AND_API_INIT(rcc_stm32, STM32_CLOCK_CONTROL_NAME,
|
|
&stm32_clock_control_init,
|
|
NULL, NULL,
|
|
PRE_KERNEL_1,
|
|
CONFIG_CLOCK_CONTROL_STM32_DEVICE_INIT_PRIORITY,
|
|
&stm32_clock_control_api);
|