78 lines
2.1 KiB
Plaintext
78 lines
2.1 KiB
Plaintext
CONFIG_NETWORKING=y
|
|
CONFIG_NET_LOG=y
|
|
CONFIG_LOG=y
|
|
CONFIG_NET_IPV6=y
|
|
CONFIG_NET_IPV4=y
|
|
CONFIG_NET_DHCPV4=n
|
|
CONFIG_NET_UDP=y
|
|
CONFIG_NET_TCP=y
|
|
CONFIG_NET_STATISTICS=y
|
|
CONFIG_NET_STATISTICS_USER_API=y
|
|
|
|
CONFIG_TEST_RANDOM_GENERATOR=y
|
|
|
|
CONFIG_NET_PKT_RX_COUNT=32
|
|
CONFIG_NET_PKT_TX_COUNT=32
|
|
CONFIG_NET_BUF_RX_COUNT=32
|
|
CONFIG_NET_BUF_TX_COUNT=32
|
|
CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT=5
|
|
CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT=5
|
|
CONFIG_NET_IF_UNICAST_IPV4_ADDR_COUNT=1
|
|
CONFIG_NET_MAX_CONTEXTS=10
|
|
|
|
CONFIG_INIT_STACKS=y
|
|
CONFIG_PRINTK=y
|
|
CONFIG_NET_SHELL=y
|
|
|
|
# Ethernet is needed for gPTP
|
|
CONFIG_NET_L2_ETHERNET=y
|
|
|
|
CONFIG_NET_CONFIG_NEED_IPV6=y
|
|
CONFIG_NET_CONFIG_NEED_IPV4=y
|
|
CONFIG_NET_CONFIG_SETTINGS=y
|
|
|
|
# There will be three network interfaces. gPTP will
|
|
# run in non-VLAN interface and then there are two extra
|
|
# VLAN interface for other use. This is just an example
|
|
# how to do this kind of setup.
|
|
|
|
# First ethernet interface will use these settings
|
|
CONFIG_NET_CONFIG_MY_IPV6_ADDR="2001:db8::1"
|
|
CONFIG_NET_CONFIG_PEER_IPV6_ADDR="2001:db8::2"
|
|
CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1"
|
|
CONFIG_NET_CONFIG_PEER_IPV4_ADDR="192.0.2.2"
|
|
|
|
# Second ethernet interface will have these settings
|
|
CONFIG_NET_SAMPLE_IFACE2_MY_IPV6_ADDR="2001:db8:100::1"
|
|
# TEST-NET-2 from RFC 5737
|
|
CONFIG_NET_SAMPLE_IFACE2_MY_IPV4_ADDR="198.51.100.1"
|
|
# VLAN tag for the second interface
|
|
CONFIG_NET_SAMPLE_IFACE2_VLAN_TAG=100
|
|
|
|
# Settings for the third network interface
|
|
CONFIG_NET_SAMPLE_IFACE3_MY_IPV6_ADDR="2001:db8:200::1"
|
|
# TEST-NET-3 from RFC 5737
|
|
CONFIG_NET_SAMPLE_IFACE3_MY_IPV4_ADDR="203.0.113.1"
|
|
# VLAN tag for the second interface
|
|
CONFIG_NET_SAMPLE_IFACE3_VLAN_TAG=200
|
|
|
|
# VLAN settings. We will have three VLANs, but the one running gPTP protocol
|
|
# will not have any tags (see IEEE 802.11AS chapter 11.3.3 for details)
|
|
CONFIG_NET_VLAN=y
|
|
CONFIG_NET_VLAN_COUNT=3
|
|
|
|
# gPTP settings
|
|
CONFIG_NET_GPTP=y
|
|
CONFIG_NET_GPTP_STATISTICS=y
|
|
|
|
# Enable these if you want to run gPTP over a VLAN link
|
|
#CONFIG_NET_GPTP_VLAN=y
|
|
#CONFIG_NET_GPTP_VLAN_TAG=100
|
|
|
|
# How many traffic classes to enable
|
|
CONFIG_NET_TC_TX_COUNT=6
|
|
CONFIG_NET_TC_RX_COUNT=4
|
|
|
|
# Enable priority support in net_context
|
|
CONFIG_NET_CONTEXT_PRIORITY=y
|