608 lines
19 KiB
C
608 lines
19 KiB
C
/*
|
|
* Copyright (c) 2022 Espressif Systems (Shanghai) Co., Ltd.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT espressif_esp32_gdma
|
|
|
|
#include <zephyr/logging/log.h>
|
|
LOG_MODULE_REGISTER(dma_esp32_gdma, CONFIG_DMA_LOG_LEVEL);
|
|
|
|
#include <hal/gdma_hal.h>
|
|
#include <hal/gdma_ll.h>
|
|
#include <gdma_channel.h>
|
|
#include <hal/dma_types.h>
|
|
|
|
#include <soc.h>
|
|
#include <soc/soc_memory_types.h>
|
|
#include <errno.h>
|
|
#include <zephyr/kernel.h>
|
|
#include <zephyr/drivers/dma.h>
|
|
#include <zephyr/drivers/dma/dma_esp32.h>
|
|
#include <zephyr/drivers/clock_control.h>
|
|
#ifndef CONFIG_SOC_SERIES_ESP32C3
|
|
#include <zephyr/drivers/interrupt_controller/intc_esp32.h>
|
|
#else
|
|
#include <zephyr/drivers/interrupt_controller/intc_esp32c3.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_SOC_SERIES_ESP32C3
|
|
#define ISR_HANDLER isr_handler_t
|
|
#else
|
|
#define ISR_HANDLER intr_handler_t
|
|
#endif
|
|
|
|
#define DMA_MAX_CHANNEL SOC_GDMA_PAIRS_PER_GROUP
|
|
|
|
struct dma_esp32_data {
|
|
gdma_hal_context_t hal;
|
|
};
|
|
|
|
enum dma_channel_dir {
|
|
DMA_RX,
|
|
DMA_TX,
|
|
DMA_UNCONFIGURED
|
|
};
|
|
|
|
struct dma_esp32_channel {
|
|
uint8_t dir;
|
|
uint8_t channel_id;
|
|
int host_id;
|
|
int periph_id;
|
|
dma_callback_t cb;
|
|
void *user_data;
|
|
dma_descriptor_t desc;
|
|
#if defined(CONFIG_SOC_SERIES_ESP32S3)
|
|
struct intr_handle_data_t *intr_handle;
|
|
#endif
|
|
};
|
|
|
|
struct dma_esp32_config {
|
|
int *irq_src;
|
|
uint8_t irq_size;
|
|
void **irq_handlers;
|
|
uint8_t dma_channel_max;
|
|
uint8_t sram_alignment;
|
|
struct dma_esp32_channel dma_channel[DMA_MAX_CHANNEL * 2];
|
|
void (*config_irq)(const struct device *dev);
|
|
struct device *src_dev;
|
|
const struct device *clock_dev;
|
|
clock_control_subsys_t clock_subsys;
|
|
};
|
|
|
|
static void IRAM_ATTR dma_esp32_isr_handle_rx(const struct device *dev,
|
|
struct dma_esp32_channel *rx, uint32_t intr_status)
|
|
{
|
|
struct dma_esp32_data *data = (struct dma_esp32_data *const)(dev)->data;
|
|
|
|
gdma_ll_rx_clear_interrupt_status(data->hal.dev, rx->channel_id, intr_status);
|
|
|
|
if (intr_status & (GDMA_LL_EVENT_RX_SUC_EOF | GDMA_LL_EVENT_RX_DONE)) {
|
|
intr_status &= ~(GDMA_LL_EVENT_RX_SUC_EOF | GDMA_LL_EVENT_RX_DONE);
|
|
}
|
|
|
|
if (rx->cb) {
|
|
rx->cb(dev, rx->user_data, rx->channel_id*2, -intr_status);
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR dma_esp32_isr_handle_tx(const struct device *dev,
|
|
struct dma_esp32_channel *tx, uint32_t intr_status)
|
|
{
|
|
struct dma_esp32_data *data = (struct dma_esp32_data *const)(dev)->data;
|
|
|
|
gdma_ll_tx_clear_interrupt_status(data->hal.dev, tx->channel_id, intr_status);
|
|
|
|
intr_status &= ~(GDMA_LL_EVENT_TX_TOTAL_EOF | GDMA_LL_EVENT_TX_DONE | GDMA_LL_EVENT_TX_EOF);
|
|
|
|
if (tx->cb) {
|
|
tx->cb(dev, tx->user_data, tx->channel_id*2 + 1, -intr_status);
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR dma_esp32_isr_handle(const struct device *dev, uint8_t rx_id, uint8_t tx_id)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
struct dma_esp32_data *data = (struct dma_esp32_data *const)(dev)->data;
|
|
struct dma_esp32_channel *dma_channel_rx = &config->dma_channel[rx_id];
|
|
struct dma_esp32_channel *dma_channel_tx = &config->dma_channel[tx_id];
|
|
uint32_t intr_status = 0;
|
|
|
|
intr_status = gdma_ll_rx_get_interrupt_status(data->hal.dev, dma_channel_rx->channel_id);
|
|
if (intr_status) {
|
|
dma_esp32_isr_handle_rx(dev, dma_channel_rx, intr_status);
|
|
}
|
|
|
|
intr_status = gdma_ll_tx_get_interrupt_status(data->hal.dev, dma_channel_tx->channel_id);
|
|
if (intr_status) {
|
|
dma_esp32_isr_handle_tx(dev, dma_channel_tx, intr_status);
|
|
}
|
|
}
|
|
|
|
#if defined(CONFIG_SOC_SERIES_ESP32C3)
|
|
static int dma_esp32_enable_interrupt(const struct device *dev,
|
|
struct dma_esp32_channel *dma_channel)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
|
|
return esp_intr_enable(config->irq_src[dma_channel->channel_id]);
|
|
}
|
|
|
|
static int dma_esp32_disable_interrupt(const struct device *dev,
|
|
struct dma_esp32_channel *dma_channel)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
|
|
return esp_intr_disable(config->irq_src[dma_channel->channel_id]);
|
|
}
|
|
#else
|
|
static int dma_esp32_enable_interrupt(const struct device *dev,
|
|
struct dma_esp32_channel *dma_channel)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
|
|
return esp_intr_enable(dma_channel->intr_handle);
|
|
}
|
|
|
|
static int dma_esp32_disable_interrupt(const struct device *dev,
|
|
struct dma_esp32_channel *dma_channel)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
|
|
return esp_intr_disable(dma_channel->intr_handle);
|
|
}
|
|
|
|
#endif
|
|
static int dma_esp32_config_rx_descriptor(struct dma_esp32_channel *dma_channel,
|
|
struct dma_block_config *block)
|
|
{
|
|
if (!esp_ptr_dma_capable((uint32_t *)block->dest_address)) {
|
|
LOG_ERR("Rx buffer not in DMA capable memory: %p", (uint32_t *)block->dest_address);
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(&dma_channel->desc, 0, sizeof(dma_channel->desc));
|
|
dma_channel->desc.buffer = (void *)block->dest_address;
|
|
dma_channel->desc.dw0.size = block->block_size;
|
|
dma_channel->desc.dw0.owner = DMA_DESCRIPTOR_BUFFER_OWNER_DMA;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dma_esp32_config_rx(const struct device *dev, struct dma_esp32_channel *dma_channel,
|
|
struct dma_config *config_dma)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
struct dma_esp32_data *data = (struct dma_esp32_data *const)(dev)->data;
|
|
struct dma_block_config *block = config_dma->head_block;
|
|
|
|
dma_channel->dir = DMA_RX;
|
|
|
|
gdma_ll_rx_reset_channel(data->hal.dev, dma_channel->channel_id);
|
|
|
|
if (dma_channel->periph_id != SOC_GDMA_TRIG_PERIPH_M2M0) {
|
|
gdma_ll_rx_connect_to_periph(data->hal.dev, dma_channel->channel_id,
|
|
dma_channel->periph_id);
|
|
}
|
|
|
|
if (config_dma->dest_burst_length) {
|
|
/*
|
|
* RX channel burst mode depends on specific data alignment
|
|
*/
|
|
gdma_ll_rx_enable_data_burst(data->hal.dev, dma_channel->channel_id,
|
|
config->sram_alignment >= 4);
|
|
gdma_ll_rx_enable_descriptor_burst(data->hal.dev, dma_channel->channel_id,
|
|
config->sram_alignment >= 4);
|
|
}
|
|
|
|
dma_channel->cb = config_dma->dma_callback;
|
|
dma_channel->user_data = config_dma->user_data;
|
|
|
|
gdma_ll_rx_clear_interrupt_status(data->hal.dev, dma_channel->channel_id, UINT32_MAX);
|
|
gdma_ll_rx_enable_interrupt(data->hal.dev, dma_channel->channel_id, UINT32_MAX,
|
|
config_dma->dma_callback != NULL);
|
|
|
|
return dma_esp32_config_rx_descriptor(dma_channel, config_dma->head_block);
|
|
}
|
|
|
|
static int dma_esp32_config_tx_descriptor(struct dma_esp32_channel *dma_channel,
|
|
struct dma_block_config *block)
|
|
{
|
|
if (!esp_ptr_dma_capable((uint32_t *)block->source_address)) {
|
|
LOG_ERR("Tx buffer not in DMA capable memory: %p",
|
|
(uint32_t *)block->source_address);
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(&dma_channel->desc, 0, sizeof(dma_channel->desc));
|
|
dma_channel->desc.buffer = (void *)block->source_address;
|
|
dma_channel->desc.dw0.size = block->block_size;
|
|
dma_channel->desc.dw0.length = block->block_size;
|
|
dma_channel->desc.dw0.suc_eof = 1;
|
|
dma_channel->desc.dw0.owner = DMA_DESCRIPTOR_BUFFER_OWNER_DMA;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dma_esp32_config_tx(const struct device *dev, struct dma_esp32_channel *dma_channel,
|
|
struct dma_config *config_dma)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
struct dma_esp32_data *data = (struct dma_esp32_data *const)(dev)->data;
|
|
struct dma_block_config *block = config_dma->head_block;
|
|
|
|
dma_channel->dir = DMA_TX;
|
|
|
|
gdma_ll_tx_reset_channel(data->hal.dev, dma_channel->channel_id);
|
|
|
|
if (dma_channel->periph_id != SOC_GDMA_TRIG_PERIPH_M2M0) {
|
|
gdma_ll_tx_connect_to_periph(data->hal.dev, dma_channel->channel_id,
|
|
dma_channel->periph_id);
|
|
}
|
|
|
|
/*
|
|
* TX channel can always enable burst mode, no matter data alignment
|
|
*/
|
|
if (config_dma->source_burst_length) {
|
|
gdma_ll_tx_enable_data_burst(data->hal.dev, dma_channel->channel_id, true);
|
|
gdma_ll_tx_enable_descriptor_burst(data->hal.dev, dma_channel->channel_id, true);
|
|
}
|
|
|
|
dma_channel->cb = config_dma->dma_callback;
|
|
dma_channel->user_data = config_dma->user_data;
|
|
|
|
gdma_ll_tx_clear_interrupt_status(data->hal.dev, dma_channel->channel_id, UINT32_MAX);
|
|
|
|
gdma_ll_tx_enable_interrupt(data->hal.dev, dma_channel->channel_id, GDMA_LL_EVENT_TX_EOF,
|
|
config_dma->dma_callback != NULL);
|
|
|
|
return dma_esp32_config_tx_descriptor(dma_channel, config_dma->head_block);
|
|
}
|
|
|
|
static int dma_esp32_config(const struct device *dev, uint32_t channel,
|
|
struct dma_config *config_dma)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
struct dma_esp32_data *data = (struct dma_esp32_data *const)(dev)->data;
|
|
struct dma_esp32_channel *dma_channel = &config->dma_channel[channel];
|
|
int ret = 0;
|
|
|
|
if (channel >= config->dma_channel_max) {
|
|
LOG_ERR("Unsupported channel");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!config_dma) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (config_dma->source_burst_length != config_dma->dest_burst_length) {
|
|
LOG_ERR("Source and destination burst lengths must be equal");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dma_channel->periph_id = config_dma->channel_direction == MEMORY_TO_MEMORY
|
|
? SOC_GDMA_TRIG_PERIPH_M2M0
|
|
: config_dma->dma_slot;
|
|
|
|
dma_channel->channel_id = channel / 2;
|
|
|
|
gdma_ll_enable_m2m_mode(data->hal.dev, dma_channel->channel_id,
|
|
config_dma->channel_direction == MEMORY_TO_MEMORY);
|
|
|
|
switch (config_dma->channel_direction) {
|
|
case MEMORY_TO_MEMORY:
|
|
/*
|
|
* Create both Tx and Rx stream on the same channel_id
|
|
*/
|
|
struct dma_esp32_channel *dma_channel_rx =
|
|
&config->dma_channel[dma_channel->channel_id * 2];
|
|
struct dma_esp32_channel *dma_channel_tx =
|
|
&config->dma_channel[(dma_channel->channel_id * 2) + 1];
|
|
|
|
dma_channel_rx->channel_id = dma_channel->channel_id;
|
|
dma_channel_tx->channel_id = dma_channel->channel_id;
|
|
|
|
dma_channel_rx->periph_id = dma_channel->periph_id;
|
|
dma_channel_tx->periph_id = dma_channel->periph_id;
|
|
|
|
ret = dma_esp32_config_rx(dev, dma_channel_rx, config_dma);
|
|
ret = dma_esp32_config_tx(dev, dma_channel_tx, config_dma);
|
|
break;
|
|
case PERIPHERAL_TO_MEMORY:
|
|
ret = dma_esp32_config_rx(dev, dma_channel, config_dma);
|
|
break;
|
|
case MEMORY_TO_PERIPHERAL:
|
|
ret = dma_esp32_config_tx(dev, dma_channel, config_dma);
|
|
break;
|
|
default:
|
|
LOG_ERR("Invalid Channel direction");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dma_esp32_start(const struct device *dev, uint32_t channel)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
struct dma_esp32_data *data = (struct dma_esp32_data *const)(dev)->data;
|
|
struct dma_esp32_channel *dma_channel = &config->dma_channel[channel];
|
|
|
|
if (channel >= config->dma_channel_max) {
|
|
LOG_ERR("Unsupported channel");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dma_esp32_enable_interrupt(dev, dma_channel)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dma_channel->periph_id == SOC_GDMA_TRIG_PERIPH_M2M0) {
|
|
struct dma_esp32_channel *dma_channel_rx =
|
|
&config->dma_channel[dma_channel->channel_id * 2];
|
|
struct dma_esp32_channel *dma_channel_tx =
|
|
&config->dma_channel[(dma_channel->channel_id * 2) + 1];
|
|
|
|
gdma_ll_rx_set_desc_addr(data->hal.dev, dma_channel->channel_id,
|
|
(int32_t)&dma_channel_rx->desc);
|
|
gdma_ll_rx_start(data->hal.dev, dma_channel->channel_id);
|
|
|
|
gdma_ll_tx_set_desc_addr(data->hal.dev, dma_channel->channel_id,
|
|
(int32_t)&dma_channel_tx->desc);
|
|
gdma_ll_tx_start(data->hal.dev, dma_channel->channel_id);
|
|
} else {
|
|
if (dma_channel->dir == DMA_RX) {
|
|
gdma_ll_rx_set_desc_addr(data->hal.dev, dma_channel->channel_id,
|
|
(int32_t)&dma_channel->desc);
|
|
gdma_ll_rx_start(data->hal.dev, dma_channel->channel_id);
|
|
} else if (dma_channel->dir == DMA_TX) {
|
|
gdma_ll_tx_set_desc_addr(data->hal.dev, dma_channel->channel_id,
|
|
(int32_t)&dma_channel->desc);
|
|
gdma_ll_tx_start(data->hal.dev, dma_channel->channel_id);
|
|
} else {
|
|
LOG_ERR("Channel %d is not configured", channel);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dma_esp32_stop(const struct device *dev, uint32_t channel)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
struct dma_esp32_data *data = (struct dma_esp32_data *const)(dev)->data;
|
|
struct dma_esp32_channel *dma_channel = &config->dma_channel[channel];
|
|
|
|
if (channel >= config->dma_channel_max) {
|
|
LOG_ERR("Unsupported channel");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dma_esp32_disable_interrupt(dev, dma_channel)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dma_channel->periph_id == SOC_GDMA_TRIG_PERIPH_M2M0) {
|
|
gdma_ll_rx_stop(data->hal.dev, dma_channel->channel_id);
|
|
gdma_ll_tx_stop(data->hal.dev, dma_channel->channel_id);
|
|
}
|
|
|
|
if (dma_channel->dir == DMA_RX) {
|
|
gdma_ll_rx_stop(data->hal.dev, dma_channel->channel_id);
|
|
} else if (dma_channel->dir == DMA_TX) {
|
|
gdma_ll_tx_stop(data->hal.dev, dma_channel->channel_id);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dma_esp32_get_status(const struct device *dev, uint32_t channel,
|
|
struct dma_status *status)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
struct dma_esp32_data *data = (struct dma_esp32_data *const)(dev)->data;
|
|
struct dma_esp32_channel *dma_channel = &config->dma_channel[channel];
|
|
|
|
if (channel >= config->dma_channel_max) {
|
|
LOG_ERR("Unsupported channel");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!status) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dma_channel->dir == DMA_RX) {
|
|
status->busy = !gdma_ll_rx_is_fsm_idle(data->hal.dev, dma_channel->channel_id);
|
|
status->dir = PERIPHERAL_TO_MEMORY;
|
|
status->read_position = dma_channel->desc.dw0.length;
|
|
} else if (dma_channel->dir == DMA_TX) {
|
|
status->busy = !gdma_ll_tx_is_fsm_idle(data->hal.dev, dma_channel->channel_id);
|
|
status->dir = MEMORY_TO_PERIPHERAL;
|
|
status->write_position = dma_channel->desc.dw0.length;
|
|
status->total_copied = dma_channel->desc.dw0.length;
|
|
status->pending_length = dma_channel->desc.dw0.size - dma_channel->desc.dw0.length;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dma_esp32_reload(const struct device *dev, uint32_t channel, uint32_t src, uint32_t dst,
|
|
size_t size)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
struct dma_esp32_data *data = (struct dma_esp32_data *const)(dev)->data;
|
|
struct dma_esp32_channel *dma_channel = &config->dma_channel[channel];
|
|
struct dma_block_config block = {0};
|
|
int err = 0;
|
|
|
|
if (channel >= config->dma_channel_max) {
|
|
LOG_ERR("Unsupported channel");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dma_channel->dir == DMA_RX) {
|
|
gdma_ll_rx_reset_channel(data->hal.dev, dma_channel->channel_id);
|
|
block.block_size = size;
|
|
block.dest_address = dst;
|
|
err = dma_esp32_config_rx_descriptor(dma_channel, &block);
|
|
if (err) {
|
|
LOG_ERR("Error reloading RX channel (%d)", err);
|
|
return err;
|
|
}
|
|
} else if (dma_channel->dir == DMA_TX) {
|
|
gdma_ll_tx_reset_channel(data->hal.dev, dma_channel->channel_id);
|
|
block.block_size = size;
|
|
block.source_address = src;
|
|
err = dma_esp32_config_tx_descriptor(dma_channel, &block);
|
|
if (err) {
|
|
LOG_ERR("Error reloading TX channel (%d)", err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_SOC_SERIES_ESP32C3)
|
|
static int dma_esp32_configure_irq(const struct device *dev)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
|
|
for (uint8_t i = 0; i < config->irq_size; i++) {
|
|
int ret = esp_intr_alloc(config->irq_src[i],
|
|
0,
|
|
(ISR_HANDLER)config->irq_handlers[i],
|
|
(void *)dev,
|
|
NULL);
|
|
if (ret != 0) {
|
|
LOG_ERR("Could not allocate interrupt handler");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int dma_esp32_configure_irq(const struct device *dev)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
struct dma_esp32_data *data = (struct dma_esp32_data *)dev->data;
|
|
struct dma_esp32_channel *dma_channel;
|
|
|
|
for (uint8_t i = 0; i < config->irq_size; i++) {
|
|
dma_channel = &config->dma_channel[i];
|
|
int ret = esp_intr_alloc(config->irq_src[i],
|
|
0,
|
|
(ISR_HANDLER)config->irq_handlers[i / 2],
|
|
(void *)dev,
|
|
&dma_channel->intr_handle);
|
|
if (ret != 0) {
|
|
LOG_ERR("Could not allocate interrupt handler");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
static int dma_esp32_init(const struct device *dev)
|
|
{
|
|
struct dma_esp32_config *config = (struct dma_esp32_config *)dev->config;
|
|
struct dma_esp32_data *data = (struct dma_esp32_data *)dev->data;
|
|
struct dma_esp32_channel *dma_channel;
|
|
int ret = 0;
|
|
|
|
if (!device_is_ready(config->clock_dev)) {
|
|
LOG_ERR("clock control device not ready");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = clock_control_on(config->clock_dev, config->clock_subsys);
|
|
if (ret < 0) {
|
|
LOG_ERR("Could not initialize clock (%d)", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = dma_esp32_configure_irq(dev);
|
|
if (ret < 0) {
|
|
LOG_ERR("Could not configure IRQ (%d)", ret);
|
|
return ret;
|
|
}
|
|
|
|
for (uint8_t i = 0; i < DMA_MAX_CHANNEL * 2; i++) {
|
|
dma_channel = &config->dma_channel[i];
|
|
dma_channel->cb = NULL;
|
|
dma_channel->dir = DMA_UNCONFIGURED;
|
|
dma_channel->periph_id = GDMA_TRIG_PERIPH_INVALID;
|
|
memset(&dma_channel->desc, 0, sizeof(dma_descriptor_t));
|
|
}
|
|
|
|
gdma_hal_init(&data->hal, 0);
|
|
gdma_ll_enable_clock(data->hal.dev, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dma_driver_api dma_esp32_api = {
|
|
.config = dma_esp32_config,
|
|
.start = dma_esp32_start,
|
|
.stop = dma_esp32_stop,
|
|
.get_status = dma_esp32_get_status,
|
|
.reload = dma_esp32_reload,
|
|
};
|
|
|
|
#define DMA_ESP32_DEFINE_IRQ_HANDLER(channel) \
|
|
__attribute__((unused)) static void IRAM_ATTR dma_esp32_isr_##channel( \
|
|
const struct device *dev) \
|
|
{ \
|
|
dma_esp32_isr_handle(dev, channel * 2, channel * 2 + 1); \
|
|
}
|
|
|
|
#define ESP32_DMA_HANDLER(channel) dma_esp32_isr_##channel
|
|
|
|
DMA_ESP32_DEFINE_IRQ_HANDLER(0)
|
|
DMA_ESP32_DEFINE_IRQ_HANDLER(1)
|
|
DMA_ESP32_DEFINE_IRQ_HANDLER(2)
|
|
#if DMA_MAX_CHANNEL >= 5
|
|
DMA_ESP32_DEFINE_IRQ_HANDLER(3)
|
|
DMA_ESP32_DEFINE_IRQ_HANDLER(4)
|
|
#endif
|
|
|
|
static void *irq_handlers[] = {
|
|
ESP32_DMA_HANDLER(0),
|
|
ESP32_DMA_HANDLER(1),
|
|
ESP32_DMA_HANDLER(2),
|
|
#if DMA_MAX_CHANNEL >= 5
|
|
ESP32_DMA_HANDLER(3),
|
|
ESP32_DMA_HANDLER(4),
|
|
#endif
|
|
};
|
|
|
|
#define DMA_ESP32_INIT(idx) \
|
|
static int irq_numbers[] = DT_INST_PROP(idx, interrupts); \
|
|
static struct dma_esp32_config dma_config_##idx = { \
|
|
.irq_src = irq_numbers, \
|
|
.irq_size = ARRAY_SIZE(irq_numbers), \
|
|
.irq_handlers = irq_handlers, \
|
|
.dma_channel_max = DT_INST_PROP(idx, dma_channels), \
|
|
.sram_alignment = DT_INST_PROP(idx, dma_buf_addr_alignment), \
|
|
.clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(idx)), \
|
|
.clock_subsys = (void *)DT_INST_CLOCKS_CELL(idx, offset), \
|
|
}; \
|
|
static struct dma_esp32_data dma_data_##idx = { \
|
|
.hal = \
|
|
{ \
|
|
.dev = (gdma_dev_t *)DT_INST_REG_ADDR(idx), \
|
|
}, \
|
|
}; \
|
|
\
|
|
DEVICE_DT_INST_DEFINE(idx, &dma_esp32_init, NULL, &dma_data_##idx, &dma_config_##idx, \
|
|
PRE_KERNEL_1, CONFIG_DMA_INIT_PRIORITY, &dma_esp32_api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(DMA_ESP32_INIT)
|