92 lines
2.9 KiB
Plaintext
92 lines
2.9 KiB
Plaintext
# Copyright 2019,2023 NXP
|
|
# Copyright (c) 2022, Basalte bv
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
|
|
menuconfig DISPLAY_MCUX_ELCDIF
|
|
bool "MCUX eLCDIF driver"
|
|
default y
|
|
depends on DT_HAS_NXP_IMX_ELCDIF_ENABLED
|
|
help
|
|
Enable support for mcux eLCDIF driver.
|
|
|
|
if DISPLAY_MCUX_ELCDIF
|
|
|
|
config MCUX_ELCDIF_FB_NUM
|
|
int "Framebuffers to allocate in driver"
|
|
default 2
|
|
range 0 2
|
|
help
|
|
Number of framebuffers to allocate in ELCDIF driver. Driver allocated
|
|
framebuffers are required to support partial display updates.
|
|
The driver has been validated to support 0 through 2 framebuffers.
|
|
Note that hardware will likely perform best if zero driver
|
|
framebuffers are allocated by the driver, and the application
|
|
implements double framebuffering by always calling display_write with
|
|
a buffer equal in size to the connected panel.
|
|
|
|
NOTE: when no framebuffers are allocated, the ELCDIF will be
|
|
set to display an empty buffer during initialization. This means
|
|
the display will show what is effectively a dump of
|
|
system RAM until a new framebuffer is written. If the security
|
|
implications of this concern you, leave at least one driver
|
|
framebuffer enabled.
|
|
|
|
config MCUX_ELCDIF_FB_SIZE
|
|
int "Framebuffer size required by the eLCDIF driver"
|
|
default 3686400
|
|
help
|
|
eLCDIF driver allocates framebuffers to support partial display updates.
|
|
The framebuffer size is computed as : panel_width * panel_height * bpp.
|
|
The default value is set to afford for a default resolution of 1280x720 and
|
|
4-bytes pixel format, e.g. ARGB8888. Applications should change this value
|
|
according to the actual used resolution and format to optimize the heap size.
|
|
|
|
config MCUX_ELCDIF_PXP
|
|
bool "Use PXP for display rotation"
|
|
depends on MCUX_PXP
|
|
depends on (MCUX_ELCDIF_FB_NUM > 0)
|
|
help
|
|
Use the PXP for display rotation. This requires the LCDIF node
|
|
have a "nxp,pxp" devicetree property pointing to the PXP device node.
|
|
The ELCDIF will only utilize the PXP to rotate frames if
|
|
display_write is called with a framebuffer equal in size to the
|
|
display.
|
|
|
|
if MCUX_ELCDIF_PXP
|
|
|
|
choice MCUX_ELCDIF_PXP_ROTATE_DIRECTION
|
|
default MCUX_ELCDIF_PXP_ROTATE_0
|
|
prompt "Rotation angle of PXP"
|
|
help
|
|
Set rotation angle of PXP. The ELCDIF cannot detect the correct
|
|
rotation angle based on the call to display_write, so the user
|
|
should configure it here.
|
|
|
|
config MCUX_ELCDIF_PXP_ROTATE_0
|
|
bool "Rotate display by 0 degrees"
|
|
help
|
|
Rotate display by 0 degrees. Primarily useful for testing,
|
|
production applications should simply disable the PXP.
|
|
|
|
config MCUX_ELCDIF_PXP_ROTATE_90
|
|
bool "Rotate display by 90 degrees"
|
|
help
|
|
Rotate display clockwise by 90 degrees
|
|
|
|
config MCUX_ELCDIF_PXP_ROTATE_180
|
|
bool "Rotate display by 180 degrees"
|
|
help
|
|
Rotate display clockwise by 180 degrees
|
|
|
|
config MCUX_ELCDIF_PXP_ROTATE_270
|
|
bool "Rotate display by 270 degrees"
|
|
help
|
|
Rotate display clockwise by 270 degrees
|
|
|
|
endchoice
|
|
|
|
endif # MCUX_ELCDIF_PXP
|
|
|
|
endif # DISPLAY_MCUX_ELCDIF
|