145 lines
3.6 KiB
ReStructuredText
145 lines
3.6 KiB
ReStructuredText
.. _dhcpv4-client-sample:
|
|
|
|
Sample DHCPv4 client application
|
|
################################
|
|
|
|
Overview
|
|
********
|
|
|
|
This application starts a DHCPv4 client, gets an IPv4 address from the
|
|
DHCPv4 server, and prints address, lease time, netmask and router
|
|
information to a serial console.
|
|
|
|
Requirements
|
|
************
|
|
|
|
- :ref:`networking_with_qemu`
|
|
|
|
Building and Running
|
|
********************
|
|
|
|
Running DHCPv4 client in Linux Host
|
|
===================================
|
|
|
|
These are instructions for how to use this sample application using
|
|
QEMU on a Linux host to negotiate IP address from DHCPv4 server running
|
|
on Linux host.
|
|
|
|
To use QEMU for testing, follow the :ref:`networking_with_qemu` guide.
|
|
|
|
Here's a sample server configuration file '/etc/dhcpd/dhcp.conf'
|
|
used to configure the DHCPv4 server:
|
|
|
|
.. code-block:: console
|
|
|
|
log-facility local7;
|
|
default-lease-time 600;
|
|
max-lease-time 7200;
|
|
|
|
subnet 192.0.2.0 netmask 255.255.255.0 {
|
|
range 192.0.2.10 192.0.2.100;
|
|
}
|
|
|
|
Use another terminal window to start up a DHCPv4 server on the Linux host,
|
|
using this conf file:
|
|
|
|
.. code-block:: console
|
|
|
|
$ sudo dhcpd -d -4 -cf /etc/dhcp/dhcpd.conf -lf /var/lib/dhcp/dhcpd.leases tap0
|
|
|
|
Run Zephyr samples/net/dhcpv4_client application in QEMU:
|
|
|
|
.. code-block:: console
|
|
|
|
$ cd $ZEPHYR_BASE/samples/net/dhcpv4_client
|
|
$ make pristine && make run
|
|
|
|
Once DHCPv4 client address negotiation completed with server, details
|
|
are shown like this:
|
|
|
|
.. code-block:: console
|
|
|
|
[dhcpv4] [INF] main: In main
|
|
[dhcpv4] [INF] main_thread: Run dhcpv4 client
|
|
[dhcpv4] [INF] handler: Your address: 192.0.2.10
|
|
[dhcpv4] [INF] handler: Lease time: 600
|
|
[dhcpv4] [INF] handler: Subnet: 255.255.255.0
|
|
[dhcpv4] [INF] handler: Router: 0.0.0.0
|
|
|
|
To verify the Zephyr application client is running and has received
|
|
an ip address by typing:
|
|
|
|
.. code-block:: console
|
|
|
|
$ ping -I tap0 192.0.2.10
|
|
|
|
|
|
FRDM_K64F
|
|
=========
|
|
|
|
These are instructions for how to use this sample application running on
|
|
:ref:`frdm_k64f` board to negotiate IP address from DHCPv4 server running on
|
|
Linux host.
|
|
|
|
Connect ethernet cable from :ref:`Freedom-K64F board <frdm_k64f>` to Linux host
|
|
machine and check for new interfaces:
|
|
|
|
.. code-block:: console
|
|
|
|
$ ifconfig
|
|
|
|
Add ip address and routing information to interface:
|
|
|
|
.. code-block:: console
|
|
|
|
$ sudo ip addr add 192.0.2.2 dev eth1
|
|
$ sudo ip route add 192.0.2.0/24 dev eth1
|
|
|
|
Here's a sample server configuration file '/etc/dhcpd/dhcp.conf'
|
|
used to configure the DHCPv4 server:
|
|
|
|
.. code-block:: console
|
|
|
|
log-facility local7;
|
|
default-lease-time 600;
|
|
max-lease-time 7200;
|
|
|
|
subnet 192.0.2.0 netmask 255.255.255.0 {
|
|
range 192.0.2.10 192.0.2.100;
|
|
}
|
|
|
|
Use another terminal window to start up a DHCPv4 server on the Linux host,
|
|
using this conf file:
|
|
|
|
.. code-block:: console
|
|
|
|
$ sudo dhcpd -d -4 -cf /etc/dhcp/dhcpd.conf -lf /var/lib/dhcp/dhcpd.leases eth1
|
|
|
|
Build Zephyr samples/net/dhcpv4_client application:
|
|
|
|
.. code-block:: console
|
|
|
|
$ cd $ZEPHYR_BASE/samples/net/dhcpv4_client
|
|
$ make pristine && make BOARD=frdm_k64f
|
|
$ cp outdir/frdm_k64f/zephyr.bin /media/rveerama/MBED/
|
|
|
|
Once DHCPv4 client address negotiation completed with server, details
|
|
are shown like this:
|
|
|
|
.. code-block:: console
|
|
|
|
$ sudo screen /dev/ttyACM0 115200
|
|
[dhcpv4] [INF] main: In main
|
|
[dhcpv4] [INF] main_thread: Run dhcpv4 client
|
|
[dhcpv4] [INF] handler: Your address: 192.0.2.10
|
|
[dhcpv4] [INF] handler: Lease time: 600
|
|
[dhcpv4] [INF] handler: Subnet: 255.255.255.0
|
|
[dhcpv4] [INF] handler: Router: 0.0.0.0
|
|
|
|
To verify the Zephyr application client is running and has received
|
|
an ip address by typing:
|
|
|
|
.. code-block:: console
|
|
|
|
$ ping -I eth1 192.0.2.10
|