109 lines
3.1 KiB
ReStructuredText
109 lines
3.1 KiB
ReStructuredText
.. zephyr:board:: qemu_cortex_m0
|
|
|
|
Overview
|
|
********
|
|
|
|
This board configuration will use QEMU to emulate the
|
|
BBC Microbit (Nordic nRF51822) platform.
|
|
|
|
This configuration provides support for an ARM Cortex-M0 CPU and these devices:
|
|
|
|
* Nested Vectored Interrupt Controller
|
|
* TIMER (nRF TIMER System Clock)
|
|
|
|
.. note::
|
|
This board configuration makes no claims about its suitability for use
|
|
with an actual nRF51 Microbit hardware system, or any other hardware system.
|
|
|
|
Hardware
|
|
********
|
|
Supported Features
|
|
==================
|
|
|
|
The following hardware features are supported:
|
|
|
|
+--------------+------------+----------------------+
|
|
| Interface | Controller | Driver/Component |
|
|
+==============+============+======================+
|
|
| NVIC | on-chip | nested vectored |
|
|
| | | interrupt controller |
|
|
+--------------+------------+----------------------+
|
|
| nRF | on-chip | serial port |
|
|
| UART | | |
|
|
+--------------+------------+----------------------+
|
|
| nRF TIMER | on-chip | system clock |
|
|
+--------------+------------+----------------------+
|
|
|
|
The kernel currently does not support other hardware features on this platform.
|
|
|
|
Devices
|
|
========
|
|
System Clock
|
|
------------
|
|
|
|
This board configuration uses a system clock frequency of 1 MHz.
|
|
|
|
Serial Port
|
|
-----------
|
|
|
|
This board configuration uses a single serial communication channel with the
|
|
CPU's UART0.
|
|
|
|
Known Problems or Limitations
|
|
==============================
|
|
|
|
The following platform features are unsupported:
|
|
|
|
* Writing to the hardware's flash memory
|
|
|
|
|
|
Programming and Debugging
|
|
*************************
|
|
|
|
Use this configuration to run basic Zephyr applications and kernel tests in the QEMU
|
|
emulated environment, for example, with the :zephyr:code-sample:`synchronization` sample:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/synchronization
|
|
:host-os: unix
|
|
:board: qemu_cortex_m0
|
|
:goals: run
|
|
|
|
This will build an image with the synchronization sample app, boot it using
|
|
QEMU, and display the following console output:
|
|
|
|
.. code-block:: console
|
|
|
|
***** BOOTING ZEPHYR OS v1.8.99 - BUILD: Jun 27 2017 13:09:26 *****
|
|
threadA: Hello World from arm!
|
|
threadB: Hello World from arm!
|
|
threadA: Hello World from arm!
|
|
threadB: Hello World from arm!
|
|
threadA: Hello World from arm!
|
|
threadB: Hello World from arm!
|
|
threadA: Hello World from arm!
|
|
threadB: Hello World from arm!
|
|
threadA: Hello World from arm!
|
|
threadB: Hello World from arm!
|
|
|
|
Exit QEMU by pressing :kbd:`CTRL+A` :kbd:`x`.
|
|
|
|
Debugging
|
|
=========
|
|
|
|
Refer to the detailed overview about :ref:`application_debugging`.
|
|
|
|
Networking
|
|
==========
|
|
|
|
References
|
|
**********
|
|
|
|
1. The Definitive Guide to the ARM Cortex-M0, Second Edition by Joseph Yiu (ISBN
|
|
978-0-12-803278-7)
|
|
2. ARMv6-M Architecture Technical Reference Manual (ARM DDI 0419D 0403D ID051917)
|
|
3. Procedure Call Standard for the ARM Architecture (ARM IHI 0042E, current
|
|
through ABI release 2.09, 2012/11/30)
|
|
4. Cortex-M0 Revision r2p1 Technical Reference Manual (ARM DDI 0432C ID113009)
|
|
5. Cortex-M0 Devices Generic User Guide (ARM DUI 0497A ID112109)
|