zephyr/boards/adafruit/feather_stm32f405/adafruit_feather_stm32f405.dts

114 lines
2.0 KiB
Plaintext

/*
* Copyright (c) 2020 Lucian Copeland for Adafruit Industries
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <st/f4/stm32f405Xg.dtsi>
#include <st/f4/stm32f405rgtx-pinctrl.dtsi>
#include "feather_connector.dtsi"
/ {
model = "Adafruit Feather STM32F405 Express";
compatible = "adafruit,adafruit_feather_stm32f405", "st,stm32f405";
chosen {
zephyr,console = &usart3;
zephyr,shell-uart = &usart3;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,ccm = &ccm0;
};
leds {
compatible = "gpio-leds";
led: led {
gpios = <&gpioc 1 GPIO_ACTIVE_HIGH>;
label = "User LED";
};
};
aliases {
led0 = &led;
};
};
&clk_lsi {
status = "okay";
};
&clk_hse {
clock-frequency = <DT_FREQ_M(12)>;
status = "okay";
};
&pll {
div-m = <12>;
mul-n = <336>;
div-p = <2>;
div-q = <7>;
clocks = <&clk_hse>;
status = "okay";
};
&rcc {
clocks = <&pll>;
clock-frequency = <DT_FREQ_M(168)>;
ahb-prescaler = <1>;
apb1-prescaler = <4>;
apb2-prescaler = <2>;
};
&usart3 {
pinctrl-0 = <&usart3_tx_pb10 &usart3_rx_pb11>;
pinctrl-names = "default";
current-speed = <115200>;
status = "okay";
};
&i2c1 {
pinctrl-0 = <&i2c1_scl_pb6 &i2c1_sda_pb7>;
pinctrl-names = "default";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&spi1_nss_pa15 { slew-rate = "very-high-speed"; };
&spi1 {
pinctrl-0 = <&spi1_nss_pa15 &spi1_sck_pb3
&spi1_miso_pb4 &spi1_mosi_pb5>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
gd25q16: gd25q16c@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
size = <0x200000>;
has-dpd;
t-enter-dpd = <20000>;
t-exit-dpd = <100000>;
jedec-id = [c8 40 15];
};
};
&spi2 {
pinctrl-0 = <&spi2_sck_pb13 &spi2_miso_pb14 &spi2_mosi_pb15>;
pinctrl-names = "default";
status = "okay";
};
&rtc {
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x10000000>,
<&rcc STM32_SRC_LSI RTC_SEL(2)>;
status = "okay";
};
zephyr_udc0: &usbotg_fs {
pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>;
pinctrl-names = "default";
status = "okay";
};