zephyr/drivers/random/random_stm32_rng.c

197 lines
4.1 KiB
C

/*
* Copyright (c) 2017 Erwin Rol <erwin@erwinrol.com>
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <kernel.h>
#include <device.h>
#include <random.h>
#include <drivers/rand32.h>
#include <init.h>
#include <misc/__assert.h>
#include <misc/util.h>
#include <errno.h>
#include <soc.h>
#include <misc/printk.h>
#include <clock_control.h>
#include <clock_control/stm32_clock_control.h>
struct random_stm32_rng_dev_cfg {
struct stm32_pclken pclken;
};
struct random_stm32_rng_dev_data {
RNG_TypeDef *rng;
struct device *clock;
};
#define DEV_DATA(dev) \
((struct random_stm32_rng_dev_data *)(dev)->driver_data)
#define DEV_CFG(dev) \
((struct random_stm32_rng_dev_cfg *)(dev)->config->config_info)
static void random_stm32_rng_reset(RNG_TypeDef *rng)
{
__ASSERT_NO_MSG(rng != NULL);
/* Reset RNG as described in RM0090 Reference manual
* section 24.3.2 Error management.
*/
LL_RNG_ClearFlag_CEIS(rng);
LL_RNG_ClearFlag_SEIS(rng);
LL_RNG_Disable(rng);
LL_RNG_Enable(rng);
}
static int random_stm32_got_error(RNG_TypeDef *rng)
{
__ASSERT_NO_MSG(rng != NULL);
if (LL_RNG_IsActiveFlag_CECS(rng)) {
return 1;
}
if (LL_RNG_IsActiveFlag_SECS(rng)) {
return 1;
}
return 0;
}
static int random_stm32_wait_ready(RNG_TypeDef *rng)
{
/* Agording to the reference manual it takes 40 periods
* of the RNG_CLK clock signal between two consecutive
* random numbers. Also RNG_CLK may not be smaller than
* HCLK/16. So it should not take more than 640 HCLK
* ticks. Assuming the CPU can do 1 instruction per HCLK
* the number of times to loop before the RNG is ready
* is less than 1000. And that is when assumming the loop
* only takes 1 instruction. So looping a million times
* should be more than enough.
*/
int timeout = 1000000;
__ASSERT_NO_MSG(rng != NULL);
while (!LL_RNG_IsActiveFlag_DRDY(rng)) {
if (random_stm32_got_error(rng)) {
return -EIO;
}
if (timeout-- == 0) {
return -ETIMEDOUT;
}
k_yield();
}
if (random_stm32_got_error(rng)) {
return -EIO;
} else {
return 0;
}
}
static int random_stm32_rng_get_entropy(struct device *dev, u8_t *buffer,
u16_t length)
{
struct random_stm32_rng_dev_data *dev_data;
int n = sizeof(u32_t);
int res;
__ASSERT_NO_MSG(dev != NULL);
__ASSERT_NO_MSG(buffer != NULL);
dev_data = DEV_DATA(dev);
__ASSERT_NO_MSG(dev_data != NULL);
/* if the RNG has errors reset it before use */
if (random_stm32_got_error(dev_data->rng)) {
random_stm32_rng_reset(dev_data->rng);
}
while (length > 0) {
u32_t rndbits;
u8_t *p_rndbits = (u8_t *)&rndbits;
res = random_stm32_wait_ready(dev_data->rng);
if (res < 0)
return res;
rndbits = LL_RNG_ReadRandData32(dev_data->rng);
if (length < sizeof(u32_t))
n = length;
for (int i = 0; i < n; i++) {
*buffer++ = *p_rndbits++;
}
length -= n;
}
return 0;
}
static int random_stm32_rng_init(struct device *dev)
{
struct random_stm32_rng_dev_data *dev_data;
struct random_stm32_rng_dev_cfg *dev_cfg;
__ASSERT_NO_MSG(dev != NULL);
dev_data = DEV_DATA(dev);
dev_cfg = DEV_CFG(dev);
__ASSERT_NO_MSG(dev_data != NULL);
__ASSERT_NO_MSG(dev_cfg != NULL);
dev_data->clock = device_get_binding(STM32_CLOCK_CONTROL_NAME);
__ASSERT_NO_MSG(dev_data->clock != NULL);
clock_control_on(dev_data->clock,
(clock_control_subsys_t *)&dev_cfg->pclken);
LL_RNG_Enable(dev_data->rng);
return 0;
}
static const struct random_driver_api random_stm32_rng_api = {
.get_entropy = random_stm32_rng_get_entropy
};
static const struct random_stm32_rng_dev_cfg random_stm32_rng_config = {
.pclken = { .bus = STM32_CLOCK_BUS_AHB2,
.enr = LL_AHB2_GRP1_PERIPH_RNG },
};
static struct random_stm32_rng_dev_data random_stm32_rng_data = {
.rng = RNG,
};
DEVICE_AND_API_INIT(random_stm32_rng, CONFIG_RANDOM_NAME,
random_stm32_rng_init,
&random_stm32_rng_data, &random_stm32_rng_config,
PRE_KERNEL_2, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
&random_stm32_rng_api);
u32_t sys_rand32_get(void)
{
u32_t output;
int rc;
rc = random_stm32_rng_get_entropy(DEVICE_GET(random_stm32_rng),
(u8_t *) &output, sizeof(output));
__ASSERT_NO_MSG(!rc);
return output;
}