Erwan Gouriou 9c1a2b515c boards: disco_l475_iot1: Remove used pinmux configuration ... USB IP is not directly available on disco_l475_iot1 and requires some HW modifications to get it enabled. Remove this USB pinmux configuration. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>		2018-05-24 08:04:00 -04:00
..
doc	boards: disco_l475_iot1: add ST reference to doc name	2017-12-19 12:45:17 -05:00
support	boards: arm: disco_l475_iot1: add openocd support	2017-10-13 13:02:17 -04:00
CMakeLists.txt	Introduce cmake-based rewrite of KBuild	2017-11-08 20:00:22 -05:00
Kconfig.board	boards: disco_l475_iot1/dts: add gpios in bt controller node	2018-05-10 14:21:16 -05:00
Kconfig.defconfig	boards: disco_l475_iot1: enable XSHUT master control	2018-05-09 13:18:58 -04:00
board.cmake	cmake: Use path-corrected version of ZEPHYR_BASE	2018-01-11 14:59:03 -05:00
board.h	boards: stm32 remove led and button definitions from board.h	2018-04-19 09:32:39 -05:00
disco_l475_iot1.dts	boards: disco_l475_iot1/dts: add gpios in bt controller node	2018-05-10 14:21:16 -05:00
disco_l475_iot1.yaml	boards: Add "ram" and "flash" properties for a number of boards	2018-03-16 13:44:06 -07:00
disco_l475_iot1_defconfig	boards: disco_l475_iot1/dts: add gpios in bt controller node	2018-05-10 14:21:16 -05:00
dts.fixup	boards: disco_l475_iot1/dts: add gpios in bt controller node	2018-05-10 14:21:16 -05:00
pinmux.c	boards: disco_l475_iot1: Remove used pinmux configuration	2018-05-24 08:04:00 -04:00