118 lines
2.8 KiB
YAML
118 lines
2.8 KiB
YAML
# Copyright (c), 2021 NXP
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
description: |
|
|
NXP PCA9420 PMIC
|
|
|
|
The PMIC has two buck converters and two LDOs. All need to be defined as
|
|
children nodes, strictly following the BUCK1, BUCK2, LDO1 and LDO2 node names.
|
|
For example:
|
|
|
|
pmic@61 {
|
|
reg = <0x61>;
|
|
...
|
|
BUCK1 {
|
|
/* all properties for BUCK1 */
|
|
};
|
|
BUCK2 {
|
|
/* all properties for BUCK2 */
|
|
};
|
|
LDO1 {
|
|
/* all properties for LDO1 */
|
|
};
|
|
LDO2 {
|
|
/* all properties for LDO2 */
|
|
};
|
|
};
|
|
|
|
|
|
compatible: "nxp,pca9420"
|
|
|
|
include: base.yaml
|
|
|
|
properties:
|
|
nxp,enable-modesel-pins:
|
|
type: boolean
|
|
description:
|
|
When enabled, the PMIC will be configured to allow mode selection using
|
|
the MODESEL0/1 inputs.
|
|
|
|
nxp,vin-ilim-microamp:
|
|
type: int
|
|
default: 425000
|
|
enum:
|
|
- 85000
|
|
- 255000
|
|
- 425000
|
|
- 595000
|
|
- 765000
|
|
- 935000
|
|
- 1105000
|
|
description: |
|
|
VIN input current limit, in microamperes. Value reflects typical value,
|
|
below you can find min/typical/max values:
|
|
|
|
- 74 mA/85 mA/98 mA
|
|
- 222 mA/255 mA/293 mA
|
|
- 370 mA/425 mA/489 mA
|
|
- 517 mA/595 mA/684 mA
|
|
- 665 mA/765 mA/880 mA
|
|
- 813 mA/935 mA/1075 mA
|
|
- 961 mA/1105 mA/1271 mA
|
|
|
|
To disable current limit, set property to zero. Defaults to 425mA, the IC
|
|
default value.
|
|
|
|
nxp,asys-uvlo-sel-millivolt:
|
|
type: int
|
|
default: 2700
|
|
enum:
|
|
- 2400
|
|
- 2500
|
|
- 2600
|
|
- 2700
|
|
description: |
|
|
ASYS UVLO (under voltage lock out) threshold, in millivolts. Defaults to
|
|
2700mV to match the IC default value.
|
|
|
|
child-binding:
|
|
include:
|
|
- name: regulator.yaml
|
|
property-allowlist:
|
|
- regulator-always-on
|
|
- regulator-boot-on
|
|
- regulator-min-microvolt
|
|
- regulator-max-microvolt
|
|
|
|
description: Voltage output of PMIC controller regulator
|
|
properties:
|
|
enable-inverted:
|
|
type: boolean
|
|
description: |
|
|
If the enable bit should be zero to turn the regulator on, add this
|
|
property.
|
|
|
|
nxp,mode0-microvolt:
|
|
type: int
|
|
description: |
|
|
The voltage level to be configured for mode 0, in microvolts. Setting
|
|
this value to zero will disable the source in mode 0.
|
|
|
|
nxp,mode1-microvolt:
|
|
type: int
|
|
description: |
|
|
The voltage level to be configured for mode 1, in microvolts. Setting
|
|
this value to zero will disable the source in mode 1.
|
|
|
|
nxp,mode2-microvolt:
|
|
type: int
|
|
description: |
|
|
The voltage level to be configured for mode 2, in microvolts. Setting
|
|
this value to zero will disable the source in mode 2.
|
|
|
|
nxp,mode3-microvolt:
|
|
type: int
|
|
description: |
|
|
The voltage level to be configured for mode 3, in microvolts. Setting
|
|
this value to zero will disable the source in mode 3.
|