326 lines
8.1 KiB
C
326 lines
8.1 KiB
C
/*
|
|
* Copyright (c) 2016, Texas Instruments Incorporated
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
#include <errno.h>
|
|
|
|
#include <device.h>
|
|
#include <gpio.h>
|
|
#include <init.h>
|
|
#include <kernel.h>
|
|
#include <sys_io.h>
|
|
|
|
/* Driverlib includes */
|
|
#include <inc/hw_types.h>
|
|
#include <inc/hw_memmap.h>
|
|
#include <inc/hw_ints.h>
|
|
#include <inc/hw_gpio.h>
|
|
#include <driverlib/rom.h>
|
|
#include <driverlib/pin.h>
|
|
#undef __GPIO_H__ /* Zephyr and CC3200SDK gpio.h conflict */
|
|
#include <driverlib/gpio.h>
|
|
#include <driverlib/rom_map.h>
|
|
#include <driverlib/interrupt.h>
|
|
|
|
#include "gpio_utils.h"
|
|
|
|
/* Note: Zephyr uses exception numbers, vs the IRQ #s used by the CC3200 SDK */
|
|
#define EXCEPTION_GPIOA0 0 /* (INT_GPIOA0 - 16) = (16-16) */
|
|
#define EXCEPTION_GPIOA1 1 /* (INT_GPIOA1 - 16) = (17-16) */
|
|
#define EXCEPTION_GPIOA2 2 /* (INT_GPIOA2 - 16) = (18-16) */
|
|
#define EXCEPTION_GPIOA3 3 /* (INT_GPIOA3 - 16) = (19-16) */
|
|
|
|
struct gpio_cc32xx_config {
|
|
/* base address of GPIO port */
|
|
unsigned long port_base;
|
|
/* GPIO IRQ number */
|
|
unsigned long irq_num;
|
|
};
|
|
|
|
struct gpio_cc32xx_data {
|
|
/* list of registered callbacks */
|
|
sys_slist_t callbacks;
|
|
/* callback enable pin bitmask */
|
|
u32_t pin_callback_enables;
|
|
};
|
|
|
|
#define DEV_CFG(dev) \
|
|
((const struct gpio_cc32xx_config *)(dev)->config->config_info)
|
|
#define DEV_DATA(dev) \
|
|
((struct gpio_cc32xx_data *)(dev)->driver_data)
|
|
|
|
static inline int gpio_cc32xx_config(struct device *port,
|
|
int access_op, u32_t pin, int flags)
|
|
{
|
|
const struct gpio_cc32xx_config *gpio_config = DEV_CFG(port);
|
|
unsigned long port_base = gpio_config->port_base;
|
|
unsigned long int_type;
|
|
|
|
/*
|
|
* See pinmux_initialize(): which leverages TI's recommended
|
|
* method of using the PinMux utility for most pin configuration.
|
|
*/
|
|
|
|
if (access_op == GPIO_ACCESS_BY_PIN) {
|
|
/* Just handle runtime interrupt type config here: */
|
|
if (flags & GPIO_INT) {
|
|
if (flags & GPIO_INT_EDGE) {
|
|
if (flags & GPIO_INT_ACTIVE_HIGH) {
|
|
int_type = GPIO_RISING_EDGE;
|
|
} else if (flags & GPIO_INT_DOUBLE_EDGE) {
|
|
int_type = GPIO_BOTH_EDGES;
|
|
} else {
|
|
int_type = GPIO_FALLING_EDGE;
|
|
}
|
|
} else { /* GPIO_INT_LEVEL */
|
|
if (flags & GPIO_INT_ACTIVE_HIGH) {
|
|
int_type = GPIO_HIGH_LEVEL;
|
|
} else {
|
|
int_type = GPIO_LOW_LEVEL;
|
|
}
|
|
}
|
|
MAP_GPIOIntTypeSet(port_base, (1 << pin), int_type);
|
|
MAP_GPIOIntClear(port_base, (1 << pin));
|
|
MAP_GPIOIntEnable(port_base, (1 << pin));
|
|
}
|
|
} else {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int gpio_cc32xx_write(struct device *port,
|
|
int access_op, u32_t pin, u32_t value)
|
|
{
|
|
const struct gpio_cc32xx_config *gpio_config = DEV_CFG(port);
|
|
unsigned long port_base = gpio_config->port_base;
|
|
|
|
if (access_op == GPIO_ACCESS_BY_PIN) {
|
|
value = value << pin;
|
|
/* Bitpack external GPIO pin number for GPIOPinWrite API: */
|
|
pin = 1 << pin;
|
|
|
|
MAP_GPIOPinWrite(port_base, (unsigned char)pin, value);
|
|
} else {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int gpio_cc32xx_read(struct device *port,
|
|
int access_op, u32_t pin, u32_t *value)
|
|
{
|
|
const struct gpio_cc32xx_config *gpio_config = DEV_CFG(port);
|
|
unsigned long port_base = gpio_config->port_base;
|
|
long status;
|
|
unsigned char pin_packed;
|
|
|
|
if (access_op == GPIO_ACCESS_BY_PIN) {
|
|
/* Bitpack external GPIO pin number for GPIOPinRead API: */
|
|
pin_packed = 1 << pin;
|
|
status = MAP_GPIOPinRead(port_base, pin_packed);
|
|
*value = status >> pin;
|
|
} else {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_cc32xx_manage_callback(struct device *dev,
|
|
struct gpio_callback *callback, bool set)
|
|
{
|
|
struct gpio_cc32xx_data *data = DEV_DATA(dev);
|
|
|
|
_gpio_manage_callback(&data->callbacks, callback, set);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int gpio_cc32xx_enable_callback(struct device *dev,
|
|
int access_op, u32_t pin)
|
|
{
|
|
struct gpio_cc32xx_data *data = DEV_DATA(dev);
|
|
|
|
if (access_op == GPIO_ACCESS_BY_PIN) {
|
|
data->pin_callback_enables |= (1 << pin);
|
|
} else {
|
|
data->pin_callback_enables = 0xFFFFFFFF;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int gpio_cc32xx_disable_callback(struct device *dev,
|
|
int access_op, u32_t pin)
|
|
{
|
|
struct gpio_cc32xx_data *data = DEV_DATA(dev);
|
|
|
|
if (access_op == GPIO_ACCESS_BY_PIN) {
|
|
data->pin_callback_enables &= ~(1 << pin);
|
|
} else {
|
|
data->pin_callback_enables = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gpio_cc32xx_port_isr(void *arg)
|
|
{
|
|
struct device *dev = arg;
|
|
const struct gpio_cc32xx_config *config = DEV_CFG(dev);
|
|
struct gpio_cc32xx_data *data = DEV_DATA(dev);
|
|
u32_t enabled_int, int_status;
|
|
|
|
/* See which interrupts triggered: */
|
|
int_status = (u32_t)MAP_GPIOIntStatus(config->port_base, 1);
|
|
|
|
enabled_int = int_status & data->pin_callback_enables;
|
|
|
|
/* Clear and Disable GPIO Interrupt */
|
|
MAP_GPIOIntDisable(config->port_base, int_status);
|
|
MAP_GPIOIntClear(config->port_base, int_status);
|
|
|
|
/* Call the registered callbacks */
|
|
_gpio_fire_callbacks(&data->callbacks, (struct device *)dev,
|
|
enabled_int);
|
|
|
|
/* Re-enable the interrupts */
|
|
MAP_GPIOIntEnable(config->port_base, int_status);
|
|
}
|
|
|
|
static const struct gpio_driver_api api_funcs = {
|
|
.config = gpio_cc32xx_config,
|
|
.write = gpio_cc32xx_write,
|
|
.read = gpio_cc32xx_read,
|
|
.manage_callback = gpio_cc32xx_manage_callback,
|
|
.enable_callback = gpio_cc32xx_enable_callback,
|
|
.disable_callback = gpio_cc32xx_disable_callback,
|
|
|
|
};
|
|
|
|
#ifdef CONFIG_GPIO_CC32XX_A0
|
|
static const struct gpio_cc32xx_config gpio_cc32xx_a0_config = {
|
|
.port_base = GPIOA0_BASE,
|
|
.irq_num = INT_GPIOA0,
|
|
};
|
|
|
|
static struct device DEVICE_NAME_GET(gpio_cc32xx_a0);
|
|
static struct gpio_cc32xx_data gpio_cc32xx_a0_data;
|
|
|
|
static int gpio_cc32xx_a0_init(struct device *dev)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
|
|
IRQ_CONNECT(EXCEPTION_GPIOA0, CONFIG_GPIO_CC32XX_A0_IRQ_PRI,
|
|
gpio_cc32xx_port_isr, DEVICE_GET(gpio_cc32xx_a0), 0);
|
|
|
|
MAP_IntPendClear(INT_GPIOA0);
|
|
irq_enable(EXCEPTION_GPIOA0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEVICE_AND_API_INIT(gpio_cc32xx_a0, CONFIG_GPIO_CC32XX_A0_NAME,
|
|
&gpio_cc32xx_a0_init, &gpio_cc32xx_a0_data,
|
|
&gpio_cc32xx_a0_config,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&api_funcs);
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_GPIO_CC32XX_A1
|
|
static const struct gpio_cc32xx_config gpio_cc32xx_a1_config = {
|
|
.port_base = GPIOA1_BASE,
|
|
.irq_num = INT_GPIOA1,
|
|
};
|
|
|
|
static struct device DEVICE_NAME_GET(gpio_cc32xx_a1);
|
|
static struct gpio_cc32xx_data gpio_cc32xx_a1_data;
|
|
|
|
static int gpio_cc32xx_a1_init(struct device *dev)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
|
|
IRQ_CONNECT(EXCEPTION_GPIOA1, CONFIG_GPIO_CC32XX_A1_IRQ_PRI,
|
|
gpio_cc32xx_port_isr, DEVICE_GET(gpio_cc32xx_a1), 0);
|
|
|
|
MAP_IntPendClear(INT_GPIOA1);
|
|
irq_enable(EXCEPTION_GPIOA1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEVICE_AND_API_INIT(gpio_cc32xx_a1, CONFIG_GPIO_CC32XX_A1_NAME,
|
|
&gpio_cc32xx_a1_init, &gpio_cc32xx_a1_data,
|
|
&gpio_cc32xx_a1_config,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&api_funcs);
|
|
|
|
#endif /* CONFIG_GPIO_CC32XX_A1 */
|
|
|
|
#ifdef CONFIG_GPIO_CC32XX_A2
|
|
static const struct gpio_cc32xx_config gpio_cc32xx_a2_config = {
|
|
.port_base = GPIOA2_BASE,
|
|
.irq_num = INT_GPIOA2,
|
|
};
|
|
|
|
static struct device DEVICE_NAME_GET(gpio_cc32xx_a2);
|
|
static struct gpio_cc32xx_data gpio_cc32xx_a2_data;
|
|
|
|
static int gpio_cc32xx_a2_init(struct device *dev)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
|
|
IRQ_CONNECT(EXCEPTION_GPIOA2, CONFIG_GPIO_CC32XX_A2_IRQ_PRI,
|
|
gpio_cc32xx_port_isr, DEVICE_GET(gpio_cc32xx_a2), 0);
|
|
|
|
MAP_IntPendClear(INT_GPIOA2);
|
|
irq_enable(EXCEPTION_GPIOA2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEVICE_AND_API_INIT(gpio_cc32xx_a2, CONFIG_GPIO_CC32XX_A2_NAME,
|
|
&gpio_cc32xx_a2_init, &gpio_cc32xx_a2_data,
|
|
&gpio_cc32xx_a2_config,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&api_funcs);
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_GPIO_CC32XX_A3
|
|
static const struct gpio_cc32xx_config gpio_cc32xx_a3_config = {
|
|
.port_base = GPIOA3_BASE,
|
|
.irq_num = INT_GPIOA3,
|
|
};
|
|
|
|
static struct device DEVICE_NAME_GET(gpio_cc32xx_a3);
|
|
static struct gpio_cc32xx_data gpio_cc32xx_a3_data;
|
|
|
|
static int gpio_cc32xx_a3_init(struct device *dev)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
|
|
IRQ_CONNECT(EXCEPTION_GPIOA3, CONFIG_GPIO_CC32XX_A3_IRQ_PRI,
|
|
gpio_cc32xx_port_isr, DEVICE_GET(gpio_cc32xx_a3), 0);
|
|
|
|
MAP_IntPendClear(INT_GPIOA3);
|
|
irq_enable(EXCEPTION_GPIOA3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEVICE_AND_API_INIT(gpio_cc32xx_a3, CONFIG_GPIO_CC32XX_A3_NAME,
|
|
&gpio_cc32xx_a3_init, &gpio_cc32xx_a3_data,
|
|
&gpio_cc32xx_a3_config,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&api_funcs);
|
|
|
|
#endif
|