189 lines
5.6 KiB
ReStructuredText
189 lines
5.6 KiB
ReStructuredText
.. xenvm:
|
|
|
|
ARMv8 Xen Virtual Machine Example
|
|
#################################
|
|
|
|
Overview
|
|
********
|
|
|
|
This board allows to run Zephyr as Xen guest on any ARMv8 board that supports
|
|
ARM Virtualization Extensions. This is example configuration, as almost any VM
|
|
configuration is unique in many aspects.
|
|
|
|
It provides minimal set of devices:
|
|
|
|
* ARM Generic timer
|
|
* GICv2/GICv3
|
|
|
|
Hardware
|
|
********
|
|
Supported Features
|
|
==================
|
|
|
|
The following hardware features are supported:
|
|
|
|
+--------------+-------------+----------------------+
|
|
| Interface | Controller | Driver/Component |
|
|
+==============+=============+======================+
|
|
| GIC | virtualized | interrupt controller |
|
|
+--------------+-------------+----------------------+
|
|
| ARM TIMER | virtualized | system clock |
|
|
+--------------+-------------+----------------------+
|
|
|
|
The kernel currently does not support other hardware features on this platform.
|
|
|
|
The default configuration using GICv2 can be found in the defconfig file:
|
|
``boards/arm64/xenvm/xenvm_defconfig``
|
|
|
|
The default configuration using GICv3 can be found in the defconfig file:
|
|
``boards/arm64/xenvm/xenvm_gicv3_defconfig``
|
|
|
|
Devices
|
|
========
|
|
System Clock
|
|
------------
|
|
|
|
This board configuration uses a system clock frequency of 8.32 MHz. This is the
|
|
default value, which should be corrected for user's actual hardware.
|
|
|
|
You can determine clock frequency of your ARM Generic Timer by inspecting Xen
|
|
boot log:
|
|
|
|
::
|
|
|
|
(XEN) [ 0.147541] Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 8320 KHz
|
|
|
|
Interrupt Controller
|
|
--------------------
|
|
|
|
Depending on the version of the GIC on your hardware, you may choose one of the
|
|
following board configurations:
|
|
|
|
- ``xenvm_defconfig`` selects GICv2
|
|
- ``xenvm_gicv3_defconfig`` selects GICv3
|
|
|
|
CPU Core type
|
|
-------------
|
|
|
|
Default core in this configuration is Cortex A72. Depending on yours actual
|
|
hardware you might want to change this option in the same way as Interrupt
|
|
Controller configuration.
|
|
|
|
Known Problems or Limitations
|
|
==============================
|
|
|
|
Xen configures guests in runtime by providing device tree that describes guest
|
|
environment. On other hand, Zephyr uses static configuration that should be know
|
|
at build time. So there are chances, that Zephyr image created with default
|
|
configuration would not boot on your hardware. In this case you need to update
|
|
configuration by altering device tree and Kconfig options. This will be covered
|
|
in detail in next section.
|
|
|
|
Most of Xen-specific features are not supported at the moment. This includes:
|
|
* XenBus (under development)
|
|
* Xen PV drivers
|
|
|
|
Now only following features are supported:
|
|
* Xen Enlighten memory page
|
|
* Xen event channels
|
|
* Xen PV console (2 versions: regular ring buffer based for DomU and consoleio for Dom0)
|
|
* Xen early console_io interface (mainly for debug purposes - requires debug version of Xen)
|
|
* Xen grant tables (granting access for own grants and map/unmap foreign grants)
|
|
|
|
Building and Running
|
|
********************
|
|
|
|
Use this configuration to run basic Zephyr applications and kernel tests as Xen
|
|
guest, for example, with the :zephyr:code-sample:`synchronization` sample:
|
|
|
|
- if your hardware is based on GICv2:
|
|
|
|
.. code-block::
|
|
|
|
$ west build -b xenvm samples/synchronization
|
|
|
|
- if your hardware is based on GICv3:
|
|
|
|
.. code-block::
|
|
|
|
$ west build -b xenvm_gicv3 samples/synchronization
|
|
|
|
This will build an image with the synchronization sample app. Next, you need to
|
|
create guest configuration file :code:`zephyr.conf`. There is example:
|
|
|
|
.. code-block::
|
|
|
|
kernel="zephyr.bin"
|
|
name="zephyr"
|
|
vcpus=1
|
|
memory=16
|
|
gic_version="v2"
|
|
on_crash="preserve"
|
|
|
|
When using ``xenvm_gicv3`` configuration, you need to remove the ``gic_version``
|
|
parameter or set it to ``"v3"``.
|
|
|
|
You need to upload both :code:`zephyr.bin` and :code:`zephyr.conf` to your Dom0
|
|
and then you can run Zephyr by issuing
|
|
|
|
.. code-block::
|
|
|
|
$ xl create zephyr.conf
|
|
|
|
Next you need to attach to PV console:
|
|
|
|
.. code-block::
|
|
|
|
$ xl console zephyr
|
|
|
|
Also this can be performed via single command:
|
|
|
|
.. code-block::
|
|
|
|
$ xl create -c zephyr.conf
|
|
|
|
You will see Zephyr output:
|
|
|
|
.. code-block:: console
|
|
|
|
*** Booting Zephyr OS build zephyr-v2.4.0-1137-g5803ee1e8183 ***
|
|
thread_a: Hello World from cpu 0 on xenvm!
|
|
thread_b: Hello World from cpu 0 on xenvm!
|
|
thread_a: Hello World from cpu 0 on xenvm!
|
|
thread_b: Hello World from cpu 0 on xenvm!
|
|
thread_a: Hello World from cpu 0 on xenvm!
|
|
|
|
Exit xen virtual console by pressing :kbd:`CTRL+]`
|
|
|
|
Updating configuration
|
|
**********************
|
|
|
|
As was said earlier, Xen describes hardware using device tree and expects that
|
|
guest will parse device tree in runtime. On other hand, Zephyr supports only
|
|
static, build time configuration. While provided configuration should work on
|
|
almost any ARMv8 host running in aarch64 mode, there is no guarantee, that Xen
|
|
will not change some values (like RAM base address) in the future.
|
|
|
|
Also, frequency of system timer is board specific and should be updated when running
|
|
Zephyr xenvm image on new hardware.
|
|
|
|
One can make Xen to dump generated DTB by using :code:`LIBXL_DEBUG_DUMP_DTB`
|
|
environment variable, like so:
|
|
|
|
.. code-block::
|
|
|
|
$ LIBXL_DEBUG_DUMP_DTB=domu-libxl.dtb xl create zephyr.conf
|
|
|
|
Then, generated "domu-libxl.dtb" file can be de-compiled using "dtc" tool.
|
|
|
|
Use information from de-compiled DTB file to update all related entries in
|
|
provided "xenvm.dts" file. If memory layout is also changed, you may need to
|
|
update :code:`CONFIG_SRAM_BASE_ADDRESS` as well.
|
|
|
|
References
|
|
**********
|
|
|
|
`Xen ARM with Virtualization Extensions <https://wiki.xenproject.org/wiki/Xen_ARM_with_Virtualization_Extensions>`_
|
|
|
|
`xl.conf (guest configuration file) manual <https://xenbits.xen.org/docs/unstable/man/xl.cfg.5.html>`_
|