Armando Visconti b7944510a4 dts/bindings: sensors: remove '-magn' extension from lis2mdl name ... The LIS2MDL is not a combo device, but pure magnotemeter. Hence, '-magn' extension is not adding information and can be removed from dts compatible name as well as binding filename. Instead specify '-i2c' or '-spi' to distinguish between the names. Signed-off-by: Armando Visconti <armando.visconti@st.com>		2019-09-12 07:58:34 -05:00
..
frdm_cr20a	doc: Use west everywhere to build and flash	2019-08-27 19:36:24 +02:00
frdm_kw41z	doc: shields: frdm_kw41z: Add shield to header	2019-08-29 19:50:15 +02:00
link_board_can	boards: shields: link_board_can: status ok->okay	2019-08-30 08:53:59 +02:00
link_board_eth	shields: add link board ETH	2019-09-12 11:30:19 +03:00
sparkfun_sara_r4	drivers: modem: ublox-sara-r4: Support SARA-U2 modems, sense VINT	2019-08-10 00:03:39 +02:00
ssd1306_128x64	shields: add generic shield for SSD1306 based 128x64 displays	2019-09-07 17:15:51 +02:00
wnc_m14a2a	dts: Replace status = "ok" with status = "okay"	2019-06-14 19:51:13 -05:00
x_nucleo_iks01a1	doc: boards: move all board docs to be index.rst	2019-02-09 17:22:08 -06:00
x_nucleo_iks01a2	dts/bindings: sensors: remove '-magn' extension from lis2mdl name	2019-09-12 07:58:34 -05:00
x_nucleo_iks01a3	dts/bindings: sensors: remove '-magn' extension from lis2mdl name	2019-09-12 07:58:34 -05:00
index.rst	doc: provide shield usage documentation	2018-09-21 18:51:26 -04:00