190 lines
5.3 KiB
Plaintext
190 lines
5.3 KiB
Plaintext
# Nuvoton Cortex-M4 Embedded Controller
|
|
|
|
# Copyright (c) 2020 Nuvoton Technology Corporation.
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
if SOC_FAMILY_NPCX
|
|
|
|
menuconfig NPCX_HEADER
|
|
bool "The output binary with NPCX binary header"
|
|
help
|
|
On NPCX series chip, the NPCX ROM code loads firmware image from flash
|
|
to RAM by the firmware binary header setting. Enable this to invoke
|
|
the 'ecst' which generates the NPCX firmware header.
|
|
|
|
if NPCX_HEADER
|
|
|
|
config NPCX_IMAGE_OUTPUT_BIN
|
|
bool "Build npcx binary in BIN format"
|
|
default y
|
|
help
|
|
Build a "raw" binary zephyr/zephyr.npcx.bin in the build directory.
|
|
The name of this file can be customized with CONFIG_KERNEL_BIN_NAME.
|
|
|
|
config NPCX_IMAGE_OUTPUT_HEX
|
|
bool "Build npcx binary in HEX format"
|
|
depends on NPCX_IMAGE_OUTPUT_BIN
|
|
help
|
|
Build an HEX binary zephyr/zephyr.npcx.hex in the build directory.
|
|
This is generated from the npcx BIN image.
|
|
The name of this file can be customized with CONFIG_KERNEL_BIN_NAME.
|
|
|
|
config NPCX_HEADER_CHIP
|
|
string
|
|
default "npcx7m6" if SOC_NPCX7M6FB || SOC_NPCX7M6FC
|
|
default "npcx7m7" if SOC_NPCX7M7FC
|
|
default "npcx9m3" if SOC_NPCX9M3F
|
|
default "npcx9m6" if SOC_NPCX9M6F
|
|
default "npcx9m7" if SOC_NPCX9M7F || SOC_NPCX9M7FB
|
|
default "npcx9mfp" if SOC_NPCX9MFP
|
|
default "npcx4m3" if SOC_NPCX4M3F
|
|
default "npcx4m8" if SOC_NPCX4M8F
|
|
|
|
choice NPCX_HEADER_SPI_MAX_CLOCK_CHOICE
|
|
prompt "Clock rate to use for SPI flash"
|
|
default NPCX_HEADER_SPI_MAX_CLOCK_20
|
|
help
|
|
This selects the max clock rate that will be used for loading firmware
|
|
binary from flash to RAM.
|
|
|
|
config NPCX_HEADER_SPI_MAX_CLOCK_20
|
|
bool "SPI flash max clock rate of 20 MHz"
|
|
|
|
config NPCX_HEADER_SPI_MAX_CLOCK_25
|
|
bool "SPI flash max clock rate of 25 MHz"
|
|
|
|
config NPCX_HEADER_SPI_MAX_CLOCK_33
|
|
bool "SPI flash max clock rate of 33 MHz"
|
|
depends on !SOC_SERIES_NPCX9
|
|
|
|
config NPCX_HEADER_SPI_MAX_CLOCK_40
|
|
bool "SPI flash max clock rate of 40 MHz"
|
|
|
|
config NPCX_HEADER_SPI_MAX_CLOCK_50
|
|
bool "SPI flash max clock rate of 50 MHz"
|
|
endchoice
|
|
|
|
config NPCX_HEADER_SPI_MAX_CLOCK
|
|
int
|
|
default 20 if NPCX_HEADER_SPI_MAX_CLOCK_20
|
|
default 25 if NPCX_HEADER_SPI_MAX_CLOCK_25
|
|
default 33 if NPCX_HEADER_SPI_MAX_CLOCK_33
|
|
default 40 if NPCX_HEADER_SPI_MAX_CLOCK_40
|
|
default 50 if NPCX_HEADER_SPI_MAX_CLOCK_50
|
|
|
|
choice NPCX_HEADER_SPI_READ_MODE_CHOICE
|
|
prompt "Reading mode used by the SPI flash"
|
|
default NPCX_HEADER_SPI_READ_MODE_NORMAL
|
|
help
|
|
This sets the reading mode that can be used by the SPI flash.
|
|
Reading modes supported are normal, fast, dual, and quad.
|
|
|
|
config NPCX_HEADER_SPI_READ_MODE_NORMAL
|
|
bool "SPI flash operates with normal reading mode"
|
|
|
|
config NPCX_HEADER_SPI_READ_MODE_FAST
|
|
bool "SPI flash operates with fast reading mode"
|
|
|
|
config NPCX_HEADER_SPI_READ_MODE_DUAL
|
|
bool "SPI flash operates with dual reading mode"
|
|
|
|
config NPCX_HEADER_SPI_READ_MODE_QUAD
|
|
bool "SPI flash operates with quad reading mode"
|
|
endchoice
|
|
|
|
config NPCX_HEADER_SPI_READ_MODE
|
|
string
|
|
default "normal" if NPCX_HEADER_SPI_READ_MODE_NORMAL
|
|
default "fast" if NPCX_HEADER_SPI_READ_MODE_FAST
|
|
default "dual" if NPCX_HEADER_SPI_READ_MODE_DUAL
|
|
default "quad" if NPCX_HEADER_SPI_READ_MODE_QUAD
|
|
|
|
choice NPCX_HEADER_CORE_CLOCK_SPI_CLOCK_RATIO_CHOICE
|
|
prompt "Core clock to SPI flash clock ratio"
|
|
default NPCX_HEADER_CORE_CLOCK_SPI_CLOCK_RATIO_1
|
|
help
|
|
This sets the clock ratio (core clock / SPI clock)
|
|
|
|
config NPCX_HEADER_CORE_CLOCK_SPI_CLOCK_RATIO_1
|
|
bool "NPCX SPI clock ratio 1"
|
|
help
|
|
The SPI flash clock has the same frequency as the core clock.
|
|
|
|
config NPCX_HEADER_CORE_CLOCK_SPI_CLOCK_RATIO_2
|
|
bool "NPCX SPI clock ratio 2"
|
|
help
|
|
The core clock frequency is twice the flash clock frequency.
|
|
endchoice
|
|
|
|
config NPCX_HEADER_CORE_CLOCK_SPI_CLOCK_RATIO
|
|
int
|
|
default 1 if NPCX_HEADER_CORE_CLOCK_SPI_CLOCK_RATIO_1
|
|
default 2 if NPCX_HEADER_CORE_CLOCK_SPI_CLOCK_RATIO_2
|
|
|
|
config NPCX_HEADER_ENABLE_HEADER_CRC
|
|
bool "Header crc check"
|
|
help
|
|
When enabled, the header will be verified at boot using a crc
|
|
checksum.
|
|
|
|
config NPCX_HEADER_ENABLE_FIRMWARE_CRC
|
|
bool "Firmware image crc check"
|
|
help
|
|
When enabled, the firmware image will be verified at boot using a
|
|
crc checksum.
|
|
|
|
choice NPCX_HEADER_FLASH_SIZE_CHOICE
|
|
prompt "Flash size"
|
|
default NPCX_HEADER_FLASH_SIZE_0P5M_1M if SOC_SERIES_NPCX7 || \
|
|
SOC_SERIES_NPCX9
|
|
default NPCX_HEADER_FLASH_SIZE_16M
|
|
help
|
|
This sets the SPI flash size.
|
|
|
|
config NPCX_HEADER_FLASH_SIZE_0P5M_1M
|
|
bool "SPI flash size 0.5M or 1M Bytes"
|
|
help
|
|
The SPI flash size is 0.5M or 1M Bytes.
|
|
|
|
config NPCX_HEADER_FLASH_SIZE_2M
|
|
bool "SPI flash size 2M Bytes"
|
|
help
|
|
The SPI flash size is 2M Bytes.
|
|
|
|
config NPCX_HEADER_FLASH_SIZE_4M
|
|
bool "SPI flash size 4M Bytes"
|
|
help
|
|
The SPI flash size is 4M Bytes.
|
|
|
|
config NPCX_HEADER_FLASH_SIZE_8M
|
|
bool "SPI flash size 8M Bytes"
|
|
help
|
|
The SPI flash size is 8M Bytes.
|
|
|
|
config NPCX_HEADER_FLASH_SIZE_16M
|
|
bool "SPI flash size 16M Bytes"
|
|
help
|
|
The SPI flash size is 16M Bytes.
|
|
endchoice
|
|
|
|
config NPCX_HEADER_FLASH_SIZE
|
|
int
|
|
default 1 if NPCX_HEADER_FLASH_SIZE_0P5M_1M
|
|
default 2 if NPCX_HEADER_FLASH_SIZE_2M
|
|
default 4 if NPCX_HEADER_FLASH_SIZE_4M
|
|
default 8 if NPCX_HEADER_FLASH_SIZE_8M
|
|
default 16 if NPCX_HEADER_FLASH_SIZE_16M
|
|
|
|
endif # NPCX_HEADER
|
|
|
|
config NPCX_PM_TRACE
|
|
bool "Trace System Power Management in NPCX family"
|
|
depends on PM
|
|
help
|
|
Internal config to enable runtime power management traces.
|
|
|
|
endif # SOC_FAMILY_NPCX
|
|
|
|
# Select SoC Part No. and configuration options
|
|
rsource "*/Kconfig"
|