70 lines
2.3 KiB
ReStructuredText
70 lines
2.3 KiB
ReStructuredText
.. _sensor_shell_sample:
|
|
|
|
Sensor Shell Module Sample
|
|
##########################
|
|
|
|
Overview
|
|
********
|
|
This is a simple shell module to get data from sensors presented in the system.
|
|
|
|
Building and Running
|
|
********************
|
|
|
|
Build the sample app by choosing the target board that has sensors drivers
|
|
enabled, for example:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/sensor/sensor_shell
|
|
:board: reel_board
|
|
:goals: build flash
|
|
|
|
Shell Module Command Help
|
|
=========================
|
|
|
|
.. code-block:: console
|
|
|
|
sensor - Sensor commands
|
|
Subcommands:
|
|
get :Get sensor data. Channel names are optional. All channels are read when
|
|
no channels are provided. Syntax:
|
|
<device_name> <channel name 0> .. <channel name N>
|
|
info :Get sensor info, such as vendor and model name, for all sensors.
|
|
|
|
|
|
**get**: prints all the sensor channels data for a given sensor device name.
|
|
Optionally, a single channel name or index can be passed to be printed out. The
|
|
device name and channel name are autocompleted.
|
|
|
|
Output example (reel_board):
|
|
|
|
.. code-block:: console
|
|
|
|
uart:~$ sensor get mma8652fc@1d
|
|
channel idx=0 accel_x = 0.000000
|
|
channel idx=1 accel_y = 0.268150
|
|
channel idx=2 accel_z = 9.959878
|
|
channel idx=3 accel_xyz x = 0.000000 y = 0.268150 z = 9.959878
|
|
|
|
uart:~$ sensor get mma8652fc@1d accel_z
|
|
channel idx=2 accel_z = 9.959878
|
|
|
|
uart:~$ sensor get mma8652fc@1d 2
|
|
channel idx=2 accel_z = 9.959878
|
|
|
|
.. note::
|
|
A valid sensor device name should be passed otherwise you will get an
|
|
undefined behavior like hardware exception. This happens because the shell
|
|
subsystem runs in supervisor mode where API callbacks are not checked before
|
|
being called.
|
|
|
|
**info**: prints vendor, model, and friendly name information for all sensors.
|
|
This command depends on enabling :kconfig:option:`CONFIG_SENSOR_INFO`.
|
|
|
|
.. code-block:: console
|
|
|
|
uart:~$ sensor info
|
|
device name: apds9960@39, vendor: Avago Technologies, model: apds9960, friendly name: (null)
|
|
device name: mma8652fc@1d, vendor: NXP Semiconductors, model: fxos8700, friendly name: (null)
|
|
device name: ti_hdc@43, vendor: Texas Instruments, model: hdc, friendly name: (null)
|
|
device name: temp@4000c000, vendor: Nordic Semiconductor, model: nrf-temp, friendly name: (null)
|