64 lines
2.6 KiB
YAML
64 lines
2.6 KiB
YAML
# Copyright (c) 2017, Linaro Limited
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
# Common fields for I3C devices
|
|
|
|
include: [base.yaml, power.yaml]
|
|
|
|
on-bus: i3c
|
|
|
|
properties:
|
|
reg:
|
|
required: true
|
|
description: |
|
|
Contains 3 fields.
|
|
|
|
For I3C devices, the 3 fields are static address, first half
|
|
of Provisioned ID, and the second half of the Provisioned ID.
|
|
1. The static address can be assigned to be the target device's
|
|
dynamic address before Dynamic Address Assignment (DAA)
|
|
starts. Can be zero if static address is not used, and
|
|
target address is determined via DAA.
|
|
2. First half of the Provisioned ID contains the manufacturer
|
|
ID left-shifted by 1, where the manufacturer ID is
|
|
the bits 33-47 (zero-based) of the 48-bit Provisioned ID.
|
|
3. Second half of the Provisioned ID contains the combination of
|
|
the part ID (bits 16-31 of the Provisioned ID) left-shifted
|
|
by 16, and the instance ID (bits 12-15 of the Provisioned ID)
|
|
left-shifted by 12. Basically, this is the lower 32 bits
|
|
of the Provisioned ID.
|
|
|
|
Note that the DT node of a I3C target device should be in format
|
|
"<node name>@<address + PID>", e.g. "sensor@4200001234012345678",
|
|
where the PID part is expanded to be a 64-bit integer.
|
|
|
|
For I2C devices, the 3 fields are static address, 0x00, and
|
|
value of the Legacy Virtual Register (LVR).
|
|
1. 7-bit address of the I2C device. (Note that 10-bit
|
|
addressing is not supported.)
|
|
2. Always 0x00.
|
|
3. LVR describes the I2C device where,
|
|
* bit[31:8]: unused.
|
|
* bit[7:5]: I2C device index:
|
|
* Index 0: I2C device has a 50 ns spike filter where
|
|
it is not affected by high frequency on SCL.
|
|
* Index 1: I2C device does not have a 50 ns spike filter
|
|
but can work with high frequency on SCL.
|
|
* Index 2: I2C device does not have a 50 ns spike filter
|
|
and cannot work with high frequency on SCL.
|
|
* Other values are reserved.
|
|
* bit[4]: I2C mode indicator:
|
|
* 0: FM+ mode
|
|
* 1: FM mode
|
|
* bit[3:0]: reserved.
|
|
|
|
The DT node of a I2C device should be in format
|
|
"<node name>@<address + 00000000 + LVR>",
|
|
e.g. "sensor@5000000000000000FF", where the middle 0x00 and LVR
|
|
are both expanded to 32-bit integers.
|
|
|
|
assigned-address:
|
|
type: int
|
|
description: |
|
|
Dynamic address to be assigned to the device.
|