84 lines
3.1 KiB
C
84 lines
3.1 KiB
C
/*
|
|
* Copyright (c) 2022, NXP
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#ifndef ZEPHYR_SOC_ARM64_NXP_IMX8M_PINCTRL_SOC_H_
|
|
#define ZEPHYR_SOC_ARM64_NXP_IMX8M_PINCTRL_SOC_H_
|
|
|
|
#include <zephyr/devicetree.h>
|
|
#include <zephyr/types.h>
|
|
#include "fsl_common.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#define MCUX_IMX_INPUT_SCHMITT_ENABLE_SHIFT IOMUXC_SW_PAD_CTL_PAD_HYS_SHIFT
|
|
#define MCUX_IMX_BIAS_PULL_UP_SHIFT IOMUXC_SW_PAD_CTL_PAD_PUE_SHIFT
|
|
#define MCUX_IMX_BIAS_PULL_ENABLE_SHIFT IOMUXC_SW_PAD_CTL_PAD_PE_SHIFT
|
|
#define MCUX_IMX_DRIVE_OPEN_DRAIN_SHIFT IOMUXC_SW_PAD_CTL_PAD_ODE_SHIFT
|
|
#define MCUX_IMX_SLEW_RATE_SHIFT IOMUXC_SW_PAD_CTL_PAD_FSEL_SHIFT
|
|
#define MCUX_IMX_DRIVE_STRENGTH_SHIFT IOMUXC_SW_PAD_CTL_PAD_DSE_SHIFT
|
|
#define MCUX_IMX_INPUT_ENABLE_SHIFT 31 /* Shift to a bit not used by IOMUXC_SW_PAD_CTL */
|
|
#define MCUX_IMX_INPUT_ENABLE(x) ((x >> MCUX_IMX_INPUT_ENABLE_SHIFT) & 0x1)
|
|
|
|
#define Z_PINCTRL_MCUX_IMX_PINCFG_INIT(node_id) \
|
|
((DT_PROP(node_id, input_schmitt_enable) << MCUX_IMX_INPUT_SCHMITT_ENABLE_SHIFT) | \
|
|
(DT_PROP(node_id, bias_pull_up) << MCUX_IMX_BIAS_PULL_UP_SHIFT) | \
|
|
((DT_PROP(node_id, bias_pull_up) | DT_PROP(node_id, bias_pull_down)) \
|
|
<< MCUX_IMX_BIAS_PULL_ENABLE_SHIFT) | \
|
|
(DT_PROP(node_id, drive_open_drain) << MCUX_IMX_DRIVE_OPEN_DRAIN_SHIFT) | \
|
|
(DT_ENUM_IDX(node_id, drive_strength) << MCUX_IMX_DRIVE_STRENGTH_SHIFT) | \
|
|
(DT_ENUM_IDX(node_id, slew_rate) << MCUX_IMX_SLEW_RATE_SHIFT) | \
|
|
(DT_PROP(node_id, input_enable) << MCUX_IMX_INPUT_ENABLE_SHIFT))
|
|
|
|
|
|
/* This struct must be present. It is used by the mcux gpio driver */
|
|
struct pinctrl_soc_pinmux {
|
|
uint32_t mux_register; /*!< IOMUXC SW_PAD_MUX register */
|
|
uint32_t config_register; /*!< IOMUXC SW_PAD_CTL register */
|
|
uint32_t input_register; /*!< IOMUXC SELECT_INPUT DAISY register */
|
|
uint8_t mux_mode: 4; /*!< Mux value for SW_PAD_MUX register */
|
|
uint32_t input_daisy:4; /*!< Mux value for SELECT_INPUT_DAISY register */
|
|
};
|
|
|
|
struct pinctrl_soc_pin {
|
|
struct pinctrl_soc_pinmux pinmux;
|
|
uint32_t pin_ctrl_flags; /*!< value to write to IOMUXC_SW_PAD_CTL register */
|
|
};
|
|
|
|
typedef struct pinctrl_soc_pin pinctrl_soc_pin_t;
|
|
|
|
/* This definition must be present. It is used by the mcux gpio driver */
|
|
#define MCUX_IMX_PINMUX(node_id) \
|
|
{ \
|
|
.mux_register = DT_PROP_BY_IDX(node_id, pinmux, 0), \
|
|
.config_register = DT_PROP_BY_IDX(node_id, pinmux, 4), \
|
|
.input_register = DT_PROP_BY_IDX(node_id, pinmux, 2), \
|
|
.mux_mode = DT_PROP_BY_IDX(node_id, pinmux, 1), \
|
|
.input_daisy = DT_PROP_BY_IDX(node_id, pinmux, 3), \
|
|
}
|
|
|
|
#define Z_PINCTRL_PINMUX(group_id, pin_prop, idx) \
|
|
MCUX_IMX_PINMUX(DT_PHANDLE_BY_IDX(group_id, pin_prop, idx))
|
|
|
|
#define Z_PINCTRL_STATE_PIN_INIT(group_id, pin_prop, idx) \
|
|
{ \
|
|
.pinmux = Z_PINCTRL_PINMUX(group_id, pin_prop, idx), \
|
|
.pin_ctrl_flags = Z_PINCTRL_MCUX_IMX_PINCFG_INIT(group_id), \
|
|
},
|
|
|
|
|
|
#define Z_PINCTRL_STATE_PINS_INIT(node_id, prop) \
|
|
{DT_FOREACH_CHILD_VARGS(DT_PHANDLE(node_id, prop), \
|
|
DT_FOREACH_PROP_ELEM, pinmux, Z_PINCTRL_STATE_PIN_INIT)}; \
|
|
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* ZEPHYR_SOC_ARM64_NXP_IMX8M_PINCTRL_SOC_H_ */
|