53 lines
1.8 KiB
Plaintext
53 lines
1.8 KiB
Plaintext
Title: Bluetooth tester application
|
|
|
|
Description:
|
|
|
|
Tester application uses binary protocol to control Zephyr stack and is aimed at
|
|
automated testing. It requires two serial ports to operate.
|
|
The first serial is used by Bluetooth Testing Protocol (BTP) to drive Bluetooth
|
|
stack. BTP commands and events are received and buffered for further processing
|
|
over the same serial.
|
|
|
|
--------------------------------------------------------------------------------
|
|
|
|
Supported Profiles:
|
|
|
|
GAP, GATT, SM
|
|
--------------------------------------------------------------------------------
|
|
|
|
Building and running on QEMU:
|
|
|
|
QEMU should have connection with the external host Bluetooth hardware.
|
|
The btproxy tool from BlueZ can be used to give access to a Bluetooth controller
|
|
attached to the Linux host OS:
|
|
|
|
$ sudo tools/btproxy -u
|
|
Listening on /tmp/bt-server-bredr
|
|
|
|
/tmp/bt-server-bredr option is already set in Makefile through QEMU_EXTRA_FLAGS.
|
|
|
|
To build tester application for QEMU:
|
|
|
|
$ make pristine && make qemu
|
|
|
|
'bt-stack-tester' UNIX socket (previously set in Makefile) can be used for now
|
|
to control tester application.
|
|
--------------------------------------------------------------------------------
|
|
|
|
Building and running on Arduino 101:
|
|
|
|
Arduino 101 is equipped with Nordic nRF51 Bluetooth LE chip, thus nble
|
|
driver has to be build.
|
|
For building tester application for Arduino 101 board with Nordic Bluetooth Low
|
|
Energy stack (NBLE) use prj_nble.conf:
|
|
|
|
$ make pristine && make CONF_FILE=prj_nble.conf BOARD=arduino_101 flash
|
|
|
|
While running tester application on Arduino 101, serial converter, typically
|
|
UART <-> USB is required by BTP to operate. Connect Arduino 101 Tx and Rx lines
|
|
(0 and 1 ports on Arduino 101 board) through the UART converter to the host
|
|
USB port.
|
|
|
|
Use serial client, e.g. PUTTY to communicate over the serial port
|
|
(typically /dev/ttyUSBx) with the tester using BTP.
|