zephyr

History

Torsten Rasmussen 1cccc8a8fe cmake: increase minimal required version to 3.20.0 Move to CMake 3.20.0. At the Toolchain WG it was decided to move to CMake 3.20.0. The main reason for increasing CMake version is better toolchain support. Better toolchain support is added in the following CMake versions: - armclang, CMake 3.15 - Intel oneAPI, CMake 3.20 - IAR, CMake 3.15 and 3.20 Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>		2021-08-20 09:47:34 +02:00
..
boards	drivers/serial/Kconfig.nrfx: Choose driver type basing on DT compatible	2020-04-03 14:47:32 +02:00
src	samples: net: gsm: Add suspend/resume shell commands	2020-10-21 00:08:39 +03:00
CMakeLists.txt	cmake: increase minimal required version to 3.20.0	2021-08-20 09:47:34 +02:00
README.rst	samples: net: gsm_modem: Add README file	2020-02-18 18:52:43 +02:00
prj.conf	samples: net: modem: Add net and modem shells	2020-02-06 10:19:25 +02:00
sample.yaml	samples: net: gsm_modem: Add GSM mux compile test	2021-05-17 10:57:53 -04:00

README.rst

.. _gsm-modem-sample:

Generic GSM Modem Sample
########################

Overview
********

The Zephyr GSM modem sample application allows user to have a connection
to GPRS network. The connection to GSM modem is done using
:ref:`PPP (Point-to-Point Protocol) <ppp>`.

The source code of this sample application can be found at:
:zephyr_file:`samples/net/gsm_modem`.

Requirements
************

- GSM modem card. The sample has been tested with SIMCOM SIM808 card. All
  GSM modem cards should work as long as they support **AT+CGDCONT** command.
- Almost any Zephyr enabled board with sufficient resources can be used.
  The sample has been tested with :ref:`reel_board`.

Build and Running
*****************

If you are using an external modem like the SIMCOM card, then connect
the necessary pins like RX and TX from your Zephyr target board to the
modem card. Internal modems, like what is found in :ref:`particle_boron`
board, are not yet supported.

.. zephyr-app-commands::
   :zephyr-app: samples/net/gsm_modem
   :board: reel_board
   :goals: build flash
   :gen-args: -DCONFIG_MODEM_GSM_APN=\"internet\"
   :compact:

Note that you might need to change the APN name according to your GSM network
configuration.