Fabio Baltieri 466ca63c2b drivers: ipm: set IPM_STM32_HSEM default from the device tree ... Change IPM_STM32_HSEM Kconfig definition so that it picks the correct default automatically depending on which cpu node is enabled in the device tree, rather than relying on board specific Kconfig overrides. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>		2021-08-30 09:33:32 -04:00
..
acsip	dts: arm: s76s: add AcSIP S76S SiP support	2021-03-18 08:48:30 -05:00
atmel	soc: arm: atmel: same70: add support for MDIO driver	2021-08-27 11:43:48 -04:00
broadcom	dts: arm: broadcom: viper-a72: paxdma: Add interrupt property	2021-03-08 20:24:04 -06:00
cypress	dts: psoc6: Use valid IRQ prio levels for CM4	2021-08-11 10:06:13 -05:00
infineon	…
microchip	Microchip: MEC172x: I2C driver	2021-08-25 13:07:45 -04:00
nordic	dts: nrf52840: add some missing nodes	2021-08-17 17:52:43 -04:00
nuvoton	soc: arm: rename soc/arm/nuvoton as soc/arm/nuvoton_numicro	2021-08-07 20:37:24 -04:00
nxp	drivers: counter: Add ctimer driver for RT685	2021-08-27 13:47:04 -05:00
quicklogic	dts: add EOS S3 GPIO definitions	2021-03-11 08:58:20 -05:00
renesas/gen3	dts: arm: rcar_gen3_cr7: Add I2C support to DTS	2021-07-14 20:58:50 -04:00
seeed	dts/arm/seeed: lora-e5: Update hse clock configuration	2021-08-24 07:19:12 -04:00
silabs	gecko pwm: pwm description to efr32fg1 and brd4250b	2021-04-02 18:45:33 -04:00
st	drivers: ipm: set IPM_STM32_HSEM default from the device tree	2021-08-30 09:33:32 -04:00
ti	linker: cc13x2_cc26x2: CCFG registers as partition	2021-04-15 12:25:55 +02:00
xilinx	dts: arm: xilinx: zynqmp: add device tree data for GEM Ethernet controllers	2021-06-21 20:11:00 -04:00
armv6-m.dtsi	dts: arm: Add #address-cells to nvic nodes	2021-08-02 15:02:09 -04:00
armv7-m.dtsi	dts: arm: Add #address-cells to nvic nodes	2021-08-02 15:02:09 -04:00
armv7-r.dtsi	…
armv8-m.dtsi	dts: arm: Add #address-cells to nvic nodes	2021-08-02 15:02:09 -04:00
armv8.1-m.dtsi	dts: arm: Add #address-cells to nvic nodes	2021-08-02 15:02:09 -04:00