154 lines
4.2 KiB
ReStructuredText
154 lines
4.2 KiB
ReStructuredText
.. _gd32vf103v_eval:
|
|
|
|
GigaDevice GD32VF103V-EVAL
|
|
##########################
|
|
|
|
Overview
|
|
********
|
|
|
|
The GD32V103V-EVAL board is a hardware platform that enables prototyping
|
|
on GD32VF103VB RISC-V MCU.
|
|
|
|
The GD32VF103VB features a single-core RISC-V 32-bit MCU which can run up
|
|
to 108 MHz with flash accesses zero wait states, 128 KiB of Flash, 32 KiB of
|
|
SRAM and 80 GPIOs.
|
|
|
|
.. image:: img/gd32vf103v_eval.jpg
|
|
:align: center
|
|
:alt: gd32vf103v_eval
|
|
|
|
Hardware
|
|
********
|
|
|
|
- GD32VF103VBT6 MCU
|
|
- AT24C02C 2Kb EEPROM
|
|
- GD25Q16 16Mbit SPI and QSPI NOR Flash
|
|
- 4 x User LEDs
|
|
- 1 x Joystick (L/R/U/D/C)
|
|
- 2 x USART (RS-232 at J1/J2 connectors)
|
|
- 1 x POT connected to an ADC input
|
|
- USB FS connector
|
|
- Headphone interface
|
|
- 1 x CAN
|
|
- 3.2" RGB-LCD (320x240)
|
|
- GD-Link on board programmer
|
|
- J-Link/JTAG connector
|
|
|
|
For more information about the GD32VF103 SoC and GD32VF103V-EVAL board:
|
|
|
|
- `GigaDevice RISC-V Mainstream SoC Website`_
|
|
- `GD32VF103 Datasheet`_
|
|
- `GD32VF103 User Manual`_
|
|
- `GD32VF103V-EVAL Documents`_
|
|
|
|
Supported Features
|
|
==================
|
|
|
|
The board configuration supports the following hardware features:
|
|
|
|
.. list-table::
|
|
:header-rows: 1
|
|
|
|
* - Peripheral
|
|
- Kconfig option
|
|
- Devicetree compatible
|
|
* - GPIO
|
|
- :kconfig:option:`CONFIG_GPIO`
|
|
- :dtcompatible:`gd,gd32-gpio`
|
|
* - Machine timer
|
|
- :kconfig:option:`CONFIG_RISCV_MACHINE_TIMER`
|
|
- :dtcompatible:`riscv,machine-timer`
|
|
* - Nuclei ECLIC Interrupt Controller
|
|
- :kconfig:option:`CONFIG_NUCLEI_ECLIC`
|
|
- :dtcompatible:`nuclei,eclic`
|
|
* - PWM
|
|
- :kconfig:option:`CONFIG_PWM`
|
|
- :dtcompatible:`gd,gd32-pwm`
|
|
* - USART
|
|
- :kconfig:option:`CONFIG_SERIAL`
|
|
- :dtcompatible:`gd,gd32-usart`
|
|
|
|
Serial Port
|
|
===========
|
|
|
|
The GD32VF103V-EVAL board has two serial communications port. The default port
|
|
is USART0 with TX connected at PA9 and RX at PA10.
|
|
|
|
Programming and Debugging
|
|
*************************
|
|
|
|
Before programming your board make sure to configure boot and serial jumpers
|
|
as follows:
|
|
|
|
- JP2/3: Select 2-3 for both (boot from user memory)
|
|
- JP5/6: Select 1-2 positions (labeled as ``USART0``)
|
|
|
|
Using GD-Link
|
|
=============
|
|
|
|
The GD32VF103V-EVAL includes an onboard programmer/debugger (GD-Link) which
|
|
allows flash programming and debugging over USB. There is also a JTAG header
|
|
(JP1) which can be used with tools like Segger J-Link.
|
|
|
|
.. note::
|
|
|
|
The OpenOCD shipped with Zephyr SDK does not support GD32VF103. You will need
|
|
to build the `riscv-openocd fork <https://github.com/riscv/riscv-openocd>`_.
|
|
Note that compared with OpenOCD, J-Link offers a better programming and
|
|
debugging experience on this board.
|
|
|
|
#. Build the Zephyr kernel and the :ref:`hello_world` sample application:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: gd32vf103v_eval
|
|
:goals: build
|
|
:gen-args: -DOPENOCD=<path/to/riscv-openocd/bin/openocd> -DOPENOCD_DEFAULT_PATH=<path/to/riscv-openocd/share/openocd/scripts>
|
|
:compact:
|
|
|
|
#. Run your favorite terminal program to listen for output. On Linux the
|
|
terminal should be something like ``/dev/ttyUSB0``. For example:
|
|
|
|
.. code-block:: console
|
|
|
|
minicom -D /dev/ttyUSB0 -o
|
|
|
|
The -o option tells minicom not to send the modem initialization
|
|
string. Connection should be configured as follows:
|
|
|
|
- Speed: 115200
|
|
- Data: 8 bits
|
|
- Parity: None
|
|
- Stop bits: 1
|
|
|
|
#. To flash an image:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: gd32vf103v_eval
|
|
:goals: flash
|
|
:compact:
|
|
|
|
You should see "Hello World! gd32vf103v_eval" in your terminal.
|
|
|
|
#. To debug an image:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: gd32vf103v_eval
|
|
:goals: debug
|
|
:compact:
|
|
|
|
|
|
.. _GigaDevice RISC-V Mainstream SoC Website:
|
|
https://www.gigadevice.com/products/microcontrollers/gd32/risc-v/mainstream-line/
|
|
|
|
.. _GD32VF103 Datasheet:
|
|
https://www.gigadevice.com/datasheet/gd32vf103xxxx-datasheet/
|
|
|
|
.. _GD32VF103 User Manual:
|
|
https://gd32mcu.21ic.com/data/documents/shujushouce/GD32VF103_User_Manual_EN_V1.2.pdf
|
|
|
|
.. _GD32VF103V-EVAL Documents:
|
|
https://github.com/riscv-mcu/GD32VF103_Demo_Suites/tree/master/GD32VF103V_EVAL_Demo_Suites/Docs
|