171 lines
5.5 KiB
ReStructuredText
171 lines
5.5 KiB
ReStructuredText
.. _stm3210c_eval_board:
|
|
|
|
STM3210C-EVAL
|
|
#############
|
|
|
|
Overview
|
|
********
|
|
The STM3210C-EVAL evaluation board is a complete development platform for STMicroelectronic's
|
|
ARM Cortex-M3 core-based STM32F107VCT microcontroller.
|
|
|
|
The range of hardware features on the board help you to evaluate all peripherals
|
|
(USB-OTG FS, ethernet, motor control, CAN, microSD CardTM, smartcard, USART,
|
|
audio DAC, MEMS, EEPROM and more) and develop your own applications.
|
|
|
|
Extension headers make it easy to connect a daughterboard or wrapping board for your specific
|
|
application.
|
|
|
|
.. image:: img/stm3210c_eval_board.jpg
|
|
:width: 660px
|
|
:height: 792px
|
|
:align: center
|
|
:alt: STM3210C-EVAL
|
|
|
|
More information about the board can be found at the `STM3210C-EVAL website`_.
|
|
|
|
Hardware
|
|
********
|
|
|
|
STM3210C-EVAL provides the following hardware components:
|
|
|
|
- Three 5 V power supply options:
|
|
- Power jack
|
|
- USB connector
|
|
- daughterboard
|
|
- Boot from user Flash, system memory or SRAM.
|
|
- I2S audio DAC, stereo audio jack.
|
|
- 2 GByte (or more) microSD CardTM.
|
|
- Both type A and B smartcard support.
|
|
- I2C compatible serial interface 64 Kbit EEPROM, MEMS and I/O expander.
|
|
- RS-232 communication.
|
|
- IrDA transceiver.
|
|
- USB-OTG full speed, USB microAB connector.
|
|
- IEEE-802.3-2002 compliant ethernet connector.
|
|
- Two channels of CAN2.0A/B compliant connection.
|
|
- Inductor motor control connector.
|
|
- JTAG and trace debug support.
|
|
- 3.2" 240x320 TFT color LCD with touch screen.
|
|
- Joystick with 4-direction control and selector.
|
|
- Reset, Wakeup, Tamper and User button.
|
|
- 4 color LEDs.
|
|
- RTC with backup battery.
|
|
- MCU consumption measurement circuit.
|
|
- Extension connector for daughterboard or wrapping board.
|
|
|
|
More information about STM32F107VCT can be found here:
|
|
- `STM32F107VCT reference manual`_
|
|
|
|
|
|
Supported Features
|
|
==================
|
|
|
|
The Zephyr stm3210c_eval board configuration supports the following hardware features:
|
|
|
|
+-----------+------------+-------------------------------------+
|
|
| Interface | Controller | Driver/Component |
|
|
+===========+============+=====================================+
|
|
| NVIC | on-chip | nested vector interrupt controller |
|
|
+-----------+------------+-------------------------------------+
|
|
| UART | on-chip | serial port-polling; |
|
|
| | | serial port-interrupt |
|
|
+-----------+------------+-------------------------------------+
|
|
| PINMUX | on-chip | pinmux |
|
|
+-----------+------------+-------------------------------------+
|
|
| GPIO | on-chip | gpio |
|
|
+-----------+------------+-------------------------------------+
|
|
| CLOCK | on-chip | reset and clock control |
|
|
+-----------+------------+-------------------------------------+
|
|
| FLASH | on-chip | flash memory |
|
|
+-----------+------------+-------------------------------------+
|
|
| IWDG | on-chip | independent watchdog |
|
|
+-----------+------------+-------------------------------------+
|
|
|
|
Other hardware features are not yet supported in this Zephyr port.
|
|
|
|
The default configuration can be found in the defconfig file
|
|
:file:`boards/arm/stm3210c_eval/stm3210c_eval_defconfig`.
|
|
|
|
Connections and IOs
|
|
===================
|
|
|
|
Each of the GPIO pins can be configured by software as output (push-pull or open-drain), as
|
|
input (with or without pull-up or pull-down), or as peripheral alternate function. Most of the
|
|
GPIO pins are shared with digital or analog alternate functions. All GPIOs are high current
|
|
capable except for analog inputs.
|
|
|
|
Board connectors:
|
|
-----------------
|
|
.. image:: img/stm3210c_eval_connectors.png
|
|
:width: 966px
|
|
:height: 1017px
|
|
:align: center
|
|
:alt: STM3210C_EVAL connectors
|
|
|
|
Default Zephyr Peripheral Mapping:
|
|
----------------------------------
|
|
- UART_2_TX : PD5
|
|
- UART_2_RX : PD6
|
|
- USER_PB : PB9
|
|
- LED2 : PD13
|
|
|
|
Programming and Debugging
|
|
*************************
|
|
|
|
Flashing
|
|
========
|
|
|
|
STM3210C-EVAL board includes an ST-LINK/V2-1 embedded debug tool interface.
|
|
At power-on, the board is in firmware-upgrade mode (also called DFU for
|
|
"Device Firmware Upgrade"), allowing the firmware to be updated through the USB.
|
|
This interface is supported by the openocd version included in Zephyr SDK.
|
|
|
|
Applications for the ``stm3210c_eval`` board configuration can be built and
|
|
flashed in the usual way (see :ref:`build_an_application` and
|
|
:ref:`application_run` for more details).
|
|
|
|
Flashing an application to STM3210C-EVAL
|
|
----------------------------------------
|
|
|
|
Connect the STM3210C-EVAL to your host computer using the USB port, then build
|
|
and flash an application in the usual way.
|
|
|
|
Here is an example for the :ref:`blinky-sample` application.
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/basic/blinky
|
|
:board: stm3210c_eval
|
|
:goals: build flash
|
|
|
|
You will see the LED blinking every second.
|
|
|
|
Debugging
|
|
=========
|
|
|
|
You can run a serial host program to connect with your STM3210C-EVAL board. For
|
|
example, on Linux:
|
|
|
|
.. code-block:: console
|
|
|
|
$ minicom -D /dev/ttyACM0
|
|
|
|
You can debug an application in the usual way. Here is an example for the
|
|
:ref:`hello_world` application.
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: stm3210c_eval
|
|
:maybe-skip-config:
|
|
:goals: debug
|
|
|
|
References
|
|
**********
|
|
|
|
.. target-notes::
|
|
|
|
.. _STM3210C-EVAL website:
|
|
http://www.st.com/en/evaluation-tools/stm3210c-eval.html
|
|
|
|
.. _STM32F107VCT reference manual:
|
|
http://www.st.com/resource/en/reference_manual/CD00171190.pdf
|
|
|