208 lines
4.8 KiB
C
208 lines
4.8 KiB
C
/*
|
|
* Copyright (c) 2021 IoT.bzh
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT renesas_rcar_pfc
|
|
|
|
#include <devicetree.h>
|
|
#include <drivers/pinctrl.h>
|
|
#include <soc.h>
|
|
#include <sys/util.h>
|
|
|
|
#define PFC_REG_BASE DT_INST_REG_ADDR(0)
|
|
#define PFC_RCAR_PMMR 0x0
|
|
#define PFC_RCAR_GPSR 0x100
|
|
#define PFC_RCAR_IPSR 0x200
|
|
|
|
/*
|
|
* Each drive step is either encoded in 2 or 3 bits.
|
|
* So based on a 24 mA maximum value each step is either
|
|
* 24/4 mA or 24/8 mA.
|
|
*/
|
|
#define PFC_RCAR_DRIVE_MAX 24U
|
|
#define PFC_RCAR_DRIVE_STEP(size) \
|
|
(size == 2 ? PFC_RCAR_DRIVE_MAX / 4 : PFC_RCAR_DRIVE_MAX / 8)
|
|
|
|
/* Some registers such as IPSR GPSR or DRVCTRL are protected and
|
|
* must be preceded to a write to PMMR with the inverse value.
|
|
*/
|
|
static void pfc_rcar_write(uint32_t offs, uint32_t val)
|
|
{
|
|
sys_write32(~val, PFC_REG_BASE + PFC_RCAR_PMMR);
|
|
sys_write32(val, PFC_REG_BASE + offs);
|
|
}
|
|
|
|
/* Set the pin either in gpio or peripheral */
|
|
static void pfc_rcar_set_gpsr(uint16_t pin, bool peripheral)
|
|
{
|
|
uint8_t bank = pin / 32;
|
|
uint8_t bit = pin % 32;
|
|
uint32_t val = sys_read32(PFC_REG_BASE + PFC_RCAR_GPSR +
|
|
bank * sizeof(uint32_t));
|
|
|
|
if (peripheral) {
|
|
val |= BIT(bit);
|
|
} else {
|
|
val &= ~BIT(bit);
|
|
}
|
|
pfc_rcar_write(PFC_RCAR_GPSR + bank * sizeof(uint32_t), val);
|
|
}
|
|
|
|
/* Set peripheral function */
|
|
static void pfc_rcar_set_ipsr(const struct rcar_pin_func *rcar_func)
|
|
{
|
|
uint16_t reg_offs = PFC_RCAR_IPSR + rcar_func->bank * sizeof(uint32_t);
|
|
uint32_t val = sys_read32(PFC_REG_BASE + reg_offs);
|
|
|
|
val &= ~(0xFU << rcar_func->shift);
|
|
val |= (rcar_func->func << rcar_func->shift);
|
|
pfc_rcar_write(reg_offs, val);
|
|
}
|
|
|
|
static uint32_t pfc_rcar_get_drive_reg(uint16_t pin, uint8_t *offset,
|
|
uint8_t *size)
|
|
{
|
|
const struct pfc_drive_reg *drive_regs = pfc_rcar_get_drive_regs();
|
|
|
|
while (drive_regs->reg != 0U) {
|
|
for (size_t i = 0U; i < ARRAY_SIZE(drive_regs->fields); i++) {
|
|
if (drive_regs->fields[i].pin == pin) {
|
|
*offset = drive_regs->fields[i].offset;
|
|
*size = drive_regs->fields[i].size;
|
|
return drive_regs->reg;
|
|
}
|
|
}
|
|
drive_regs++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Maximum drive strength is 24mA. This value can be lowered
|
|
* using DRVCTRLx registers, some pins have 8 steps (3 bits size encoded)
|
|
* some have 4 steps (2 bits size encoded).
|
|
*/
|
|
static int pfc_rcar_set_drive_strength(uint16_t pin, uint8_t strength)
|
|
{
|
|
uint8_t offset, size, step;
|
|
uint32_t reg, val;
|
|
|
|
reg = pfc_rcar_get_drive_reg(pin, &offset, &size);
|
|
if (reg == 0U) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
step = PFC_RCAR_DRIVE_STEP(size);
|
|
if ((strength < step) || (strength > PFC_RCAR_DRIVE_MAX)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Convert the value from mA based on a full drive strength
|
|
* value of 24mA.
|
|
*/
|
|
strength = (strength / step) - 1U;
|
|
/* clear previous drive strength value */
|
|
val = sys_read32(PFC_REG_BASE + reg);
|
|
val &= ~GENMASK(offset + size - 1U, offset);
|
|
val |= strength << offset;
|
|
|
|
pfc_rcar_write(reg, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pfc_bias_reg *pfc_rcar_get_bias_reg(uint16_t pin,
|
|
uint8_t *bit)
|
|
{
|
|
const struct pfc_bias_reg *bias_regs = pfc_rcar_get_bias_regs();
|
|
|
|
/* Loop arround all the registers to find the bit for a given pin */
|
|
while (bias_regs->puen && bias_regs->pud) {
|
|
for (size_t i = 0U; i < ARRAY_SIZE(bias_regs->pins); i++) {
|
|
if (bias_regs->pins[i] == pin) {
|
|
*bit = i;
|
|
return bias_regs;
|
|
}
|
|
}
|
|
bias_regs++;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
int pfc_rcar_set_bias(uint16_t pin, uint16_t flags)
|
|
{
|
|
uint32_t val;
|
|
uint8_t bit;
|
|
const struct pfc_bias_reg *bias_reg = pfc_rcar_get_bias_reg(pin, &bit);
|
|
|
|
if (bias_reg == NULL) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* pull enable/disable*/
|
|
val = sys_read32(PFC_REG_BASE + bias_reg->puen);
|
|
if ((flags & RCAR_PIN_FLAGS_PUEN) == 0U) {
|
|
sys_write32(val & ~BIT(bit), PFC_REG_BASE + bias_reg->puen);
|
|
return 0;
|
|
}
|
|
sys_write32(val | BIT(bit), PFC_REG_BASE + bias_reg->puen);
|
|
|
|
/* pull - up/down */
|
|
val = sys_read32(PFC_REG_BASE + bias_reg->pud);
|
|
if (flags & RCAR_PIN_FLAGS_PUD) {
|
|
sys_write32(val | BIT(bit), PFC_REG_BASE + bias_reg->pud);
|
|
} else {
|
|
sys_write32(val & ~BIT(bit), PFC_REG_BASE + bias_reg->pud);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int pinctrl_configure_pin(const pinctrl_soc_pin_t *pin)
|
|
{
|
|
int ret = 0;
|
|
|
|
/* Some pins cannot be used as GPIO */
|
|
if (RCAR_IS_GP_PIN(pin->pin)) {
|
|
pfc_rcar_set_gpsr(pin->pin, true);
|
|
}
|
|
|
|
if ((pin->flags & RCAR_PIN_FLAGS_FUNC_SET) != 0U) {
|
|
pfc_rcar_set_ipsr(&pin->func);
|
|
}
|
|
|
|
if ((pin->flags & RCAR_PIN_FLAGS_PULL_SET) != 0U) {
|
|
ret = pfc_rcar_set_bias(pin->pin, pin->flags);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (pin->drive_strength != 0U) {
|
|
ret = pfc_rcar_set_drive_strength(pin->pin,
|
|
pin->drive_strength);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int pinctrl_configure_pins(const pinctrl_soc_pin_t *pins, uint8_t pin_cnt,
|
|
uintptr_t reg)
|
|
{
|
|
int ret = 0;
|
|
|
|
ARG_UNUSED(reg);
|
|
while (pin_cnt-- > 0U) {
|
|
ret = pinctrl_configure_pin(pins++);
|
|
if (ret < 0) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|