130 lines
2.7 KiB
C
130 lines
2.7 KiB
C
/* ST Microelectronics LIS2DW12 3-axis accelerometer driver
|
|
*
|
|
* Copyright (c) 2019 STMicroelectronics
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Datasheet:
|
|
* https://www.st.com/resource/en/datasheet/lis2dw12.pdf
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT st_lis2dw12
|
|
|
|
|
|
#include <string.h>
|
|
#include "lis2dw12.h"
|
|
#include <logging/log.h>
|
|
|
|
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(spi)
|
|
|
|
#define LIS2DW12_SPI_READ (1 << 7)
|
|
|
|
LOG_MODULE_DECLARE(LIS2DW12, CONFIG_SENSOR_LOG_LEVEL);
|
|
|
|
static struct spi_config lis2dw12_spi_conf = {
|
|
.frequency = DT_INST_PROP(0, spi_max_frequency),
|
|
.operation = (SPI_OP_MODE_MASTER | SPI_MODE_CPOL |
|
|
SPI_MODE_CPHA | SPI_WORD_SET(8) | SPI_LINES_SINGLE),
|
|
.slave = DT_INST_REG_ADDR(0),
|
|
.cs = NULL,
|
|
};
|
|
|
|
static int lis2dw12_spi_read(struct lis2dw12_data *ctx, uint8_t reg,
|
|
uint8_t *data, uint16_t len)
|
|
{
|
|
struct spi_config *spi_cfg = &lis2dw12_spi_conf;
|
|
uint8_t buffer_tx[2] = { reg | LIS2DW12_SPI_READ, 0 };
|
|
const struct spi_buf tx_buf = {
|
|
.buf = buffer_tx,
|
|
.len = 2,
|
|
};
|
|
const struct spi_buf_set tx = {
|
|
.buffers = &tx_buf,
|
|
.count = 1
|
|
};
|
|
const struct spi_buf rx_buf[2] = {
|
|
{
|
|
.buf = NULL,
|
|
.len = 1,
|
|
},
|
|
{
|
|
.buf = data,
|
|
.len = len,
|
|
}
|
|
};
|
|
const struct spi_buf_set rx = {
|
|
.buffers = rx_buf,
|
|
.count = 2
|
|
};
|
|
|
|
if (spi_transceive(ctx->bus, spi_cfg, &tx, &rx)) {
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lis2dw12_spi_write(struct lis2dw12_data *ctx, uint8_t reg,
|
|
uint8_t *data, uint16_t len)
|
|
{
|
|
struct spi_config *spi_cfg = &lis2dw12_spi_conf;
|
|
uint8_t buffer_tx[1] = { reg & ~LIS2DW12_SPI_READ };
|
|
const struct spi_buf tx_buf[2] = {
|
|
{
|
|
.buf = buffer_tx,
|
|
.len = 1,
|
|
},
|
|
{
|
|
.buf = data,
|
|
.len = len,
|
|
}
|
|
};
|
|
const struct spi_buf_set tx = {
|
|
.buffers = tx_buf,
|
|
.count = 2
|
|
};
|
|
|
|
|
|
if (spi_write(ctx->bus, spi_cfg, &tx)) {
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
stmdev_ctx_t lis2dw12_spi_ctx = {
|
|
.read_reg = (stmdev_read_ptr) lis2dw12_spi_read,
|
|
.write_reg = (stmdev_write_ptr) lis2dw12_spi_write,
|
|
};
|
|
|
|
int lis2dw12_spi_init(struct device *dev)
|
|
{
|
|
struct lis2dw12_data *data = dev->driver_data;
|
|
|
|
data->ctx = &lis2dw12_spi_ctx;
|
|
data->ctx->handle = data;
|
|
|
|
#if DT_INST_SPI_DEV_HAS_CS_GPIOS(0)
|
|
/* handle SPI CS thru GPIO if it is the case */
|
|
data->cs_ctrl.gpio_dev = device_get_binding(
|
|
DT_INST_SPI_DEV_CS_GPIOS_LABEL(0));
|
|
if (!data->cs_ctrl.gpio_dev) {
|
|
LOG_ERR("Unable to get GPIO SPI CS device");
|
|
return -ENODEV;
|
|
}
|
|
|
|
data->cs_ctrl.gpio_pin = DT_INST_SPI_DEV_CS_GPIOS_PIN(0);
|
|
data->cs_ctrl.gpio_dt_flags = DT_INST_SPI_DEV_CS_GPIOS_FLAGS(0);
|
|
data->cs_ctrl.delay = 0U;
|
|
|
|
lis2dw12_spi_conf.cs = &data->cs_ctrl;
|
|
|
|
LOG_DBG("SPI GPIO CS configured on %s:%u",
|
|
DT_INST_SPI_DEV_CS_GPIOS_LABEL(0),
|
|
DT_INST_SPI_DEV_CS_GPIOS_PIN(0));
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif /* DT_ANY_INST_ON_BUS_STATUS_OKAY(spi) */
|