71 lines
2.2 KiB
ReStructuredText
71 lines
2.2 KiB
ReStructuredText
.. _nrf52-power-mgr-sample:
|
|
|
|
nRF52 Power management demo
|
|
###########################
|
|
|
|
Overview
|
|
********
|
|
|
|
This sample demonstrates a power manager app that uses the Zephyr
|
|
power management infrastructure to enter into Low Power state.
|
|
|
|
This app will cycle through the following power schemes each time idle thread
|
|
calls _sys_soc_suspend() hook function :
|
|
|
|
1. Low Power State: Low Power State is SOC specific and being in this state is
|
|
transparent to devices. SOC and devices do not lose context in this Mode.
|
|
SOC supports the following two Low Power states :
|
|
|
|
A. CONSTANT LATENCY LOW POWER MODE : This Low Power State triggers CONSTLAT
|
|
task on nrf52 SOC. In this Mode there is Low Exit latency and 16MHz Clock
|
|
is kept ON.
|
|
B. LOW POWER STATE : In this Power State CONSTLAT task is triggered on nrf52
|
|
SOC. This is a deeper power state than CONSTANT LATENCY Mode. In this mode
|
|
the 16MHz Clock is turned off and only 32KHz clock is used.
|
|
|
|
2. Deep Sleep: This Power State is mapped to SYSTEM OFF state. In this mode
|
|
all devices on board get suspended. All devices and SOC lose context on
|
|
wake up.
|
|
|
|
3. No-op: No operation, letting kernel idle.
|
|
|
|
Requirements
|
|
************
|
|
|
|
This application uses nrf52 DK board for the demo.
|
|
|
|
Building, Flashing and Running
|
|
******************************
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/boards/nrf52/power_mgr
|
|
:board: nrf52_pca10040
|
|
:goals: build flash
|
|
:compact:
|
|
|
|
Running:
|
|
|
|
1. Open UART terminal.
|
|
2. Power Cycle Device.
|
|
3. Device will enter into Low Power Mode.
|
|
4. Press Button 1 on device. This will wake device from Low Power Mode.
|
|
5. Repeat Step 4 for entering into other Low Power/Deep Sleep states.
|
|
|
|
|
|
Sample Output
|
|
=================
|
|
nrf52 core output
|
|
-----------------
|
|
|
|
.. code-block:: console
|
|
|
|
***Power Management Demo on arm****
|
|
Demo Description
|
|
Application creates Idleness, Due to which System Idle Thread is
|
|
scheduled and it enters into various Low Power States.
|
|
Press Button 1 on Board to wake device from Low Power State
|
|
Application main thread
|
|
---->Low power state entry - CONSTANT LATENCY MODE----- Low power state exit!
|
|
---->Low power state entry - LOW POWER MODE ----- Low power state exit!
|
|
===> Entry Into Deep Sleep ==
|