zephyr/ext/hal/nxp/mcux/drivers/imx/fsl_rtwdog.h

401 lines
13 KiB
C

/*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_RTWDOG_H_
#define _FSL_RTWDOG_H_
#include "fsl_common.h"
/*!
* @addtogroup rtwdog
* @{
*/
/*******************************************************************************
* Definitions
*******************************************************************************/
/*! @name Unlock sequence */
/*@{*/
#define WDOG_FIRST_WORD_OF_UNLOCK (RTWDOG_UPDATE_KEY & 0xFFFFU) /*!< First word of unlock sequence */
#define WDOG_SECOND_WORD_OF_UNLOCK ((RTWDOG_UPDATE_KEY >> 16U)& 0xFFFFU) /*!< Second word of unlock sequence */
/*@}*/
/*! @name Refresh sequence */
/*@{*/
#define WDOG_FIRST_WORD_OF_REFRESH (RTWDOG_REFRESH_KEY & 0xFFFFU) /*!< First word of refresh sequence */
#define WDOG_SECOND_WORD_OF_REFRESH ((RTWDOG_REFRESH_KEY >> 16U)& 0xFFFFU) /*!< Second word of refresh sequence */
/*@}*/
/*! @name Driver version */
/*@{*/
/*! @brief RTWDOG driver version 2.0.0. */
#define FSL_RTWDOG_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/*! @brief Describes RTWDOG clock source. */
typedef enum _rtwdog_clock_source
{
kRTWDOG_ClockSource0 = 0U, /*!< Clock source 0 */
kRTWDOG_ClockSource1 = 1U, /*!< Clock source 1 */
kRTWDOG_ClockSource2 = 2U, /*!< Clock source 2 */
kRTWDOG_ClockSource3 = 3U, /*!< Clock source 3 */
} rtwdog_clock_source_t;
/*! @brief Describes the selection of the clock prescaler. */
typedef enum _rtwdog_clock_prescaler
{
kRTWDOG_ClockPrescalerDivide1 = 0x0U, /*!< Divided by 1 */
kRTWDOG_ClockPrescalerDivide256 = 0x1U, /*!< Divided by 256 */
} rtwdog_clock_prescaler_t;
/*! @brief Defines RTWDOG work mode. */
typedef struct _rtwdog_work_mode
{
bool enableWait; /*!< Enables or disables RTWDOG in wait mode */
bool enableStop; /*!< Enables or disables RTWDOG in stop mode */
bool enableDebug; /*!< Enables or disables RTWDOG in debug mode */
} rtwdog_work_mode_t;
/*! @brief Describes RTWDOG test mode. */
typedef enum _rtwdog_test_mode
{
kRTWDOG_TestModeDisabled = 0U, /*!< Test Mode disabled */
kRTWDOG_UserModeEnabled = 1U, /*!< User Mode enabled */
kRTWDOG_LowByteTest = 2U, /*!< Test Mode enabled, only low byte is used */
kRTWDOG_HighByteTest = 3U, /*!< Test Mode enabled, only high byte is used */
} rtwdog_test_mode_t;
/*! @brief Describes RTWDOG configuration structure. */
typedef struct _rtwdog_config
{
bool enableRtwdog; /*!< Enables or disables RTWDOG */
rtwdog_clock_source_t clockSource; /*!< Clock source select */
rtwdog_clock_prescaler_t prescaler; /*!< Clock prescaler value */
rtwdog_work_mode_t workMode; /*!< Configures RTWDOG work mode in debug stop and wait mode */
rtwdog_test_mode_t testMode; /*!< Configures RTWDOG test mode */
bool enableUpdate; /*!< Update write-once register enable */
bool enableInterrupt; /*!< Enables or disables RTWDOG interrupt */
bool enableWindowMode; /*!< Enables or disables RTWDOG window mode */
uint16_t windowValue; /*!< Window value */
uint16_t timeoutValue; /*!< Timeout value */
} rtwdog_config_t;
/*!
* @brief RTWDOG interrupt configuration structure.
*
* This structure contains the settings for all of the RTWDOG interrupt configurations.
*/
enum _rtwdog_interrupt_enable_t
{
kRTWDOG_InterruptEnable = RTWDOG_CS_INT_MASK, /*!< Interrupt is generated before forcing a reset */
};
/*!
* @brief RTWDOG status flags.
*
* This structure contains the RTWDOG status flags for use in the RTWDOG functions.
*/
enum _rtwdog_status_flags_t
{
kRTWDOG_RunningFlag = RTWDOG_CS_EN_MASK, /*!< Running flag, set when RTWDOG is enabled */
kRTWDOG_InterruptFlag = RTWDOG_CS_FLG_MASK, /*!< Interrupt flag, set when interrupt occurs */
};
/*******************************************************************************
* API
*******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */
/*!
* @name RTWDOG Initialization and De-initialization
* @{
*/
/*!
* @brief Initializes the RTWDOG configuration structure.
*
* This function initializes the RTWDOG configuration structure to default values. The default
* values are:
* @code
* rtwdogConfig->enableRtwdog = true;
* rtwdogConfig->clockSource = kRTWDOG_ClockSource1;
* rtwdogConfig->prescaler = kRTWDOG_ClockPrescalerDivide1;
* rtwdogConfig->workMode.enableWait = true;
* rtwdogConfig->workMode.enableStop = false;
* rtwdogConfig->workMode.enableDebug = false;
* rtwdogConfig->testMode = kRTWDOG_TestModeDisabled;
* rtwdogConfig->enableUpdate = true;
* rtwdogConfig->enableInterrupt = false;
* rtwdogConfig->enableWindowMode = false;
* rtwdogConfig->windowValue = 0U;
* rtwdogConfig->timeoutValue = 0xFFFFU;
* @endcode
*
* @param config Pointer to the RTWDOG configuration structure.
* @see rtwdog_config_t
*/
void RTWDOG_GetDefaultConfig(rtwdog_config_t *config);
/*!
* @brief Initializes the RTWDOG module.
*
* This function initializes the RTWDOG.
* To reconfigure the RTWDOG without forcing a reset first, enableUpdate must be set to true
* in the configuration.
*
* Example:
* @code
* rtwdog_config_t config;
* RTWDOG_GetDefaultConfig(&config);
* config.timeoutValue = 0x7ffU;
* config.enableUpdate = true;
* RTWDOG_Init(wdog_base,&config);
* @endcode
*
* @param base RTWDOG peripheral base address.
* @param config The configuration of the RTWDOG.
*/
void RTWDOG_Init(RTWDOG_Type *base, const rtwdog_config_t *config);
/*!
* @brief De-initializes the RTWDOG module.
*
* This function shuts down the RTWDOG.
* Ensure that the WDOG_CS.UPDATE is 1, which means that the register update is enabled.
*
* @param base RTWDOG peripheral base address.
*/
void RTWDOG_Deinit(RTWDOG_Type *base);
/* @} */
/*!
* @name RTWDOG functional Operation
* @{
*/
/*!
* @brief Enables the RTWDOG module.
*
* This function writes a value into the WDOG_CS register to enable the RTWDOG.
* The WDOG_CS register is a write-once register. Ensure that the WCT window is still open and
* this register has not been written in this WCT while the function is called.
*
* @param base RTWDOG peripheral base address.
*/
static inline void RTWDOG_Enable(RTWDOG_Type *base)
{
base->CS |= RTWDOG_CS_EN_MASK;
}
/*!
* @brief Disables the RTWDOG module.
*
* This function writes a value into the WDOG_CS register to disable the RTWDOG.
* The WDOG_CS register is a write-once register. Ensure that the WCT window is still open and
* this register has not been written in this WCT while the function is called.
*
* @param base RTWDOG peripheral base address
*/
static inline void RTWDOG_Disable(RTWDOG_Type *base)
{
base->CS &= ~RTWDOG_CS_EN_MASK;
}
/*!
* @brief Enables the RTWDOG interrupt.
*
* This function writes a value into the WDOG_CS register to enable the RTWDOG interrupt.
* The WDOG_CS register is a write-once register. Ensure that the WCT window is still open and
* this register has not been written in this WCT while the function is called.
*
* @param base RTWDOG peripheral base address.
* @param mask The interrupts to enable.
* The parameter can be a combination of the following source if defined:
* @arg kRTWDOG_InterruptEnable
*/
static inline void RTWDOG_EnableInterrupts(RTWDOG_Type *base, uint32_t mask)
{
base->CS |= mask;
}
/*!
* @brief Disables the RTWDOG interrupt.
*
* This function writes a value into the WDOG_CS register to disable the RTWDOG interrupt.
* The WDOG_CS register is a write-once register. Ensure that the WCT window is still open and
* this register has not been written in this WCT while the function is called.
*
* @param base RTWDOG peripheral base address.
* @param mask The interrupts to disabled.
* The parameter can be a combination of the following source if defined:
* @arg kRTWDOG_InterruptEnable
*/
static inline void RTWDOG_DisableInterrupts(RTWDOG_Type *base, uint32_t mask)
{
base->CS &= ~mask;
}
/*!
* @brief Gets the RTWDOG all status flags.
*
* This function gets all status flags.
*
* Example to get the running flag:
* @code
* uint32_t status;
* status = RTWDOG_GetStatusFlags(wdog_base) & kRTWDOG_RunningFlag;
* @endcode
* @param base RTWDOG peripheral base address
* @return State of the status flag: asserted (true) or not-asserted (false). @see _rtwdog_status_flags_t
* - true: related status flag has been set.
* - false: related status flag is not set.
*/
static inline uint32_t RTWDOG_GetStatusFlags(RTWDOG_Type *base)
{
return (base->CS & (RTWDOG_CS_EN_MASK | RTWDOG_CS_FLG_MASK));
}
/*!
* @brief Clears the RTWDOG flag.
*
* This function clears the RTWDOG status flag.
*
* Example to clear an interrupt flag:
* @code
* RTWDOG_ClearStatusFlags(wdog_base,kRTWDOG_InterruptFlag);
* @endcode
* @param base RTWDOG peripheral base address.
* @param mask The status flags to clear.
* The parameter can be any combination of the following values:
* @arg kRTWDOG_InterruptFlag
*/
void RTWDOG_ClearStatusFlags(RTWDOG_Type *base, uint32_t mask);
/*!
* @brief Sets the RTWDOG timeout value.
*
* This function writes a timeout value into the WDOG_TOVAL register.
* The WDOG_TOVAL register is a write-once register. Ensure that the WCT window is still open and
* this register has not been written in this WCT while the function is called.
*
* @param base RTWDOG peripheral base address
* @param timeoutCount RTWDOG timeout value, count of RTWDOG clock ticks.
*/
static inline void RTWDOG_SetTimeoutValue(RTWDOG_Type *base, uint16_t timeoutCount)
{
base->TOVAL = timeoutCount;
}
/*!
* @brief Sets the RTWDOG window value.
*
* This function writes a window value into the WDOG_WIN register.
* The WDOG_WIN register is a write-once register. Ensure that the WCT window is still open and
* this register has not been written in this WCT while the function is called.
*
* @param base RTWDOG peripheral base address.
* @param windowValue RTWDOG window value.
*/
static inline void RTWDOG_SetWindowValue(RTWDOG_Type *base, uint16_t windowValue)
{
base->WIN = windowValue;
}
/*!
* @brief Unlocks the RTWDOG register written.
*
* This function unlocks the RTWDOG register written.
*
* Before starting the unlock sequence and following the configuration, disable the global interrupts.
* Otherwise, an interrupt could effectively invalidate the unlock sequence and the WCT may expire.
* After the configuration finishes, re-enable the global interrupts.
*
* @param base RTWDOG peripheral base address
*/
static inline void RTWDOG_Unlock(RTWDOG_Type *base)
{
if ((base->CS) & RTWDOG_CS_CMD32EN_MASK)
{
base->CNT = RTWDOG_UPDATE_KEY;
}
else
{
base->CNT = WDOG_FIRST_WORD_OF_UNLOCK;
base->CNT = WDOG_SECOND_WORD_OF_UNLOCK;
}
}
/*!
* @brief Refreshes the RTWDOG timer.
*
* This function feeds the RTWDOG.
* This function should be called before the Watchdog timer is in timeout. Otherwise, a reset is asserted.
*
* @param base RTWDOG peripheral base address
*/
static inline void RTWDOG_Refresh(RTWDOG_Type *base)
{
if ((base->CS) & RTWDOG_CS_CMD32EN_MASK)
{
base->CNT = RTWDOG_REFRESH_KEY;
}
else
{
base->CNT = WDOG_FIRST_WORD_OF_REFRESH;
base->CNT = WDOG_SECOND_WORD_OF_REFRESH;
}
}
/*!
* @brief Gets the RTWDOG counter value.
*
* This function gets the RTWDOG counter value.
*
* @param base RTWDOG peripheral base address.
* @return Current RTWDOG counter value.
*/
static inline uint16_t RTWDOG_GetCounterValue(RTWDOG_Type *base)
{
return base->CNT;
}
/*@}*/
#if defined(__cplusplus)
}
#endif /* __cplusplus */
/*! @}*/
#endif /* _FSL_RTWDOG_H_ */