241 lines
5.8 KiB
C
241 lines
5.8 KiB
C
/*
|
|
* Copyright (c) 2016 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <errno.h>
|
|
#include <i2c.h>
|
|
#include <soc.h>
|
|
#include <fsl_i2c.h>
|
|
#include <fsl_clock.h>
|
|
#include <misc/util.h>
|
|
#include "i2c-priv.h"
|
|
|
|
#define DEV_CFG(dev) \
|
|
((const struct i2c_mcux_config * const)(dev)->config->config_info)
|
|
#define DEV_DATA(dev) \
|
|
((struct i2c_mcux_data * const)(dev)->driver_data)
|
|
#define DEV_BASE(dev) \
|
|
((I2C_Type *)(DEV_CFG(dev))->base)
|
|
|
|
struct i2c_mcux_config {
|
|
I2C_Type *base;
|
|
clock_name_t clock_source;
|
|
void (*irq_config_func)(struct device *dev);
|
|
u32_t bitrate;
|
|
};
|
|
|
|
struct i2c_mcux_data {
|
|
i2c_master_handle_t handle;
|
|
struct k_sem device_sync_sem;
|
|
status_t callback_status;
|
|
};
|
|
|
|
static int i2c_mcux_configure(struct device *dev, u32_t dev_config_raw)
|
|
{
|
|
I2C_Type *base = DEV_BASE(dev);
|
|
const struct i2c_mcux_config *config = DEV_CFG(dev);
|
|
union dev_config dev_config = (union dev_config)dev_config_raw;
|
|
u32_t clock_freq;
|
|
u32_t baudrate;
|
|
|
|
if (!dev_config.bits.is_master_device) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dev_config.bits.use_10_bit_addr) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (dev_config.bits.speed) {
|
|
case I2C_SPEED_STANDARD:
|
|
baudrate = KHZ(100);
|
|
break;
|
|
case I2C_SPEED_FAST:
|
|
baudrate = MHZ(1);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
clock_freq = CLOCK_GetFreq(config->clock_source);
|
|
I2C_MasterSetBaudRate(base, baudrate, clock_freq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void i2c_mcux_master_transfer_callback(I2C_Type *base,
|
|
i2c_master_handle_t *handle, status_t status, void *userData)
|
|
{
|
|
struct device *dev = userData;
|
|
struct i2c_mcux_data *data = DEV_DATA(dev);
|
|
|
|
ARG_UNUSED(handle);
|
|
ARG_UNUSED(base);
|
|
|
|
data->callback_status = status;
|
|
k_sem_give(&data->device_sync_sem);
|
|
}
|
|
|
|
static u32_t i2c_mcux_convert_flags(int msg_flags)
|
|
{
|
|
u32_t flags = 0;
|
|
|
|
if (!(msg_flags & I2C_MSG_STOP)) {
|
|
flags |= kI2C_TransferNoStopFlag;
|
|
}
|
|
|
|
if (msg_flags & I2C_MSG_RESTART) {
|
|
flags |= kI2C_TransferRepeatedStartFlag;
|
|
}
|
|
|
|
return flags;
|
|
}
|
|
|
|
static int i2c_mcux_transfer(struct device *dev, struct i2c_msg *msgs,
|
|
u8_t num_msgs, u16_t addr)
|
|
{
|
|
I2C_Type *base = DEV_BASE(dev);
|
|
struct i2c_mcux_data *data = DEV_DATA(dev);
|
|
i2c_master_transfer_t transfer;
|
|
status_t status;
|
|
|
|
/* Iterate over all the messages */
|
|
for (int i = 0; i < num_msgs; i++) {
|
|
|
|
/* Initialize the transfer descriptor */
|
|
transfer.flags = i2c_mcux_convert_flags(msgs->flags);
|
|
transfer.slaveAddress = addr;
|
|
transfer.direction = (msgs->flags & I2C_MSG_READ)
|
|
? kI2C_Read : kI2C_Write;
|
|
transfer.subaddress = 0;
|
|
transfer.subaddressSize = 0;
|
|
transfer.data = msgs->buf;
|
|
transfer.dataSize = msgs->len;
|
|
|
|
/* Start the transfer */
|
|
status = I2C_MasterTransferNonBlocking(base,
|
|
&data->handle, &transfer);
|
|
|
|
/* Return an error if the transfer didn't start successfully
|
|
* e.g., if the bus was busy
|
|
*/
|
|
if (status != kStatus_Success) {
|
|
return -EIO;
|
|
}
|
|
|
|
/* Wait for the transfer to complete */
|
|
k_sem_take(&data->device_sync_sem, K_FOREVER);
|
|
|
|
/* Return an error if the transfer didn't complete
|
|
* successfully. e.g., nak, timeout, lost arbitration
|
|
*/
|
|
if (data->callback_status != kStatus_Success) {
|
|
return -EIO;
|
|
}
|
|
|
|
/* Move to the next message */
|
|
msgs++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void i2c_mcux_isr(void *arg)
|
|
{
|
|
struct device *dev = (struct device *)arg;
|
|
I2C_Type *base = DEV_BASE(dev);
|
|
struct i2c_mcux_data *data = DEV_DATA(dev);
|
|
|
|
I2C_MasterTransferHandleIRQ(base, &data->handle);
|
|
}
|
|
|
|
static int i2c_mcux_init(struct device *dev)
|
|
{
|
|
I2C_Type *base = DEV_BASE(dev);
|
|
const struct i2c_mcux_config *config = DEV_CFG(dev);
|
|
struct i2c_mcux_data *data = DEV_DATA(dev);
|
|
u32_t clock_freq, bitrate_cfg;
|
|
i2c_master_config_t master_config;
|
|
int error;
|
|
|
|
k_sem_init(&data->device_sync_sem, 0, UINT_MAX);
|
|
|
|
clock_freq = CLOCK_GetFreq(config->clock_source);
|
|
I2C_MasterGetDefaultConfig(&master_config);
|
|
I2C_MasterInit(base, &master_config, clock_freq);
|
|
I2C_MasterTransferCreateHandle(base, &data->handle,
|
|
i2c_mcux_master_transfer_callback, dev);
|
|
|
|
bitrate_cfg = _i2c_map_dt_bitrate(config->bitrate);
|
|
|
|
error = i2c_mcux_configure(dev, I2C_MODE_MASTER | bitrate_cfg);
|
|
if (error) {
|
|
return error;
|
|
}
|
|
|
|
config->irq_config_func(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_driver_api i2c_mcux_driver_api = {
|
|
.configure = i2c_mcux_configure,
|
|
.transfer = i2c_mcux_transfer,
|
|
};
|
|
|
|
#ifdef CONFIG_I2C_0
|
|
static void i2c_mcux_config_func_0(struct device *dev);
|
|
|
|
static const struct i2c_mcux_config i2c_mcux_config_0 = {
|
|
.base = (I2C_Type *)CONFIG_I2C_MCUX_0_BASE_ADDRESS,
|
|
.clock_source = I2C0_CLK_SRC,
|
|
.irq_config_func = i2c_mcux_config_func_0,
|
|
.bitrate = CONFIG_I2C_MCUX_0_BITRATE,
|
|
};
|
|
|
|
static struct i2c_mcux_data i2c_mcux_data_0;
|
|
|
|
DEVICE_AND_API_INIT(i2c_mcux_0, CONFIG_I2C_0_NAME, &i2c_mcux_init,
|
|
&i2c_mcux_data_0, &i2c_mcux_config_0,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&i2c_mcux_driver_api);
|
|
|
|
static void i2c_mcux_config_func_0(struct device *dev)
|
|
{
|
|
ARG_UNUSED(dev);
|
|
|
|
IRQ_CONNECT(CONFIG_I2C_MCUX_0_IRQ, CONFIG_I2C_MCUX_0_IRQ_PRI,
|
|
i2c_mcux_isr, DEVICE_GET(i2c_mcux_0), 0);
|
|
|
|
irq_enable(CONFIG_I2C_MCUX_0_IRQ);
|
|
}
|
|
#endif /* CONFIG_I2C_0 */
|
|
|
|
#ifdef CONFIG_I2C_1
|
|
static void i2c_mcux_config_func_1(struct device *dev);
|
|
|
|
static const struct i2c_mcux_config i2c_mcux_config_1 = {
|
|
.base = (I2C_Type *)CONFIG_I2C_MCUX_1_BASE_ADDRESS,
|
|
.clock_source = I2C1_CLK_SRC,
|
|
.irq_config_func = i2c_mcux_config_func_1,
|
|
.bitrate = CONFIG_I2C_MCUX_1_BITRATE,
|
|
};
|
|
|
|
static struct i2c_mcux_data i2c_mcux_data_1;
|
|
|
|
DEVICE_AND_API_INIT(i2c_mcux_1, CONFIG_I2C_1_NAME, &i2c_mcux_init,
|
|
&i2c_mcux_data_1, &i2c_mcux_config_1,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&i2c_mcux_driver_api);
|
|
|
|
static void i2c_mcux_config_func_1(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(CONFIG_I2C_MCUX_1_IRQ, CONFIG_I2C_MCUX_1_IRQ_PRI,
|
|
i2c_mcux_isr, DEVICE_GET(i2c_mcux_1), 0);
|
|
|
|
irq_enable(CONFIG_I2C_MCUX_1_IRQ);
|
|
}
|
|
#endif /* CONFIG_I2C_1 */
|