413 lines
11 KiB
C
413 lines
11 KiB
C
/* pci_interface.c - PCI bus support */
|
|
|
|
/*
|
|
* Copyright (c) 2009-2011, 2013-2014 Wind River Systems, Inc.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* 1) Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
*
|
|
* 2) Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
*
|
|
* 3) Neither the name of Wind River Systems nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software without
|
|
* specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
DESCRIPTION
|
|
|
|
This module implements the PCI H/W access functions.
|
|
|
|
*/
|
|
|
|
#include <nanokernel.h>
|
|
#include <arch/cpu.h>
|
|
|
|
#include <pci/pci_mgr.h>
|
|
#include <string.h>
|
|
#include <board.h>
|
|
|
|
#if (PCI_CTRL_ADDR_REG == 0)
|
|
#error "PCI_CTRL_ADDR_REG cannot be zero"
|
|
#endif
|
|
|
|
#if (PCI_CTRL_DATA_REG == 0)
|
|
#error "PCI_CTRL_DATA_REG cannot be zero"
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
*
|
|
* pci_ctrl_read - read a PCI controller register
|
|
*
|
|
* This routine reads the specified register from the PCI controller and
|
|
* places the data into the provided buffer.
|
|
*
|
|
* RETURNS: N/A
|
|
*
|
|
*/
|
|
|
|
static void pci_ctrl_read(uint32_t reg, /* PCI register to read */
|
|
uint32_t *data, /* where to put the data */
|
|
uint32_t size /* size of the data to read (8/16/32 bits) */
|
|
)
|
|
{
|
|
/* read based on the size requested */
|
|
|
|
switch (size) {
|
|
/* long (32 bits) */
|
|
case SYS_PCI_ACCESS_32BIT:
|
|
*data = PLB_LONG_REG_READ(reg);
|
|
break;
|
|
/* word (16 bits) */
|
|
case SYS_PCI_ACCESS_16BIT:
|
|
*data = PLB_WORD_REG_READ(reg);
|
|
break;
|
|
/* byte (8 bits) */
|
|
case SYS_PCI_ACCESS_8BIT:
|
|
*data = PLB_BYTE_REG_READ(reg);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* pci_ctrl_write - write a PCI controller register
|
|
*
|
|
* This routine writes the provided data to the specified register in the PCI
|
|
* controller.
|
|
*
|
|
* RETURNS: N/A
|
|
*
|
|
*/
|
|
|
|
static void pci_ctrl_write(uint32_t reg, /* PCI register to write */
|
|
uint32_t data, /* data to write */
|
|
uint32_t size /* size of the data to write (8/16/32 bits)
|
|
*/
|
|
)
|
|
{
|
|
/* write based on the size requested */
|
|
|
|
switch (size) {
|
|
/* long (32 bits) */
|
|
case SYS_PCI_ACCESS_32BIT:
|
|
PLB_LONG_REG_WRITE(data, reg);
|
|
break;
|
|
/* word (16 bits) */
|
|
case SYS_PCI_ACCESS_16BIT:
|
|
PLB_WORD_REG_WRITE(data, reg);
|
|
break;
|
|
/* byte (8 bits) */
|
|
case SYS_PCI_ACCESS_8BIT:
|
|
PLB_BYTE_REG_WRITE(data, reg);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* pci_ctrl_data_read - read the PCI controller data register
|
|
*
|
|
* This routine reads the data register of the specified PCI controller.
|
|
*
|
|
* RETURNS: 0 or -1
|
|
*
|
|
*/
|
|
|
|
static int pci_ctrl_data_read(uint32_t controller, /* controller number */
|
|
uint32_t offset, /* offset within data region */
|
|
uint32_t *data, /* returned data */
|
|
uint32_t size /* size of data to read */
|
|
)
|
|
{
|
|
/* we only support one controller */
|
|
|
|
if (controller != DEFAULT_PCI_CONTROLLER)
|
|
return (-1);
|
|
|
|
pci_ctrl_read(PCI_CTRL_DATA_REG + offset, data, size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* pci_ctrl_data_write - write the PCI controller data register
|
|
*
|
|
* This routine writes the provided data to the data register of the
|
|
* specified PCI controller.
|
|
*
|
|
* RETURNS: 0 or -1
|
|
*
|
|
*/
|
|
|
|
static int pci_ctrl_data_write(uint32_t controller, /* controller number */
|
|
uint32_t offset, /* offset within address register */
|
|
uint32_t data, /* data to write */
|
|
uint32_t size /* size of data */
|
|
)
|
|
{
|
|
/* we only support one controller */
|
|
|
|
if (controller != DEFAULT_PCI_CONTROLLER)
|
|
return (-1);
|
|
|
|
pci_ctrl_write(PCI_CTRL_DATA_REG + offset, data, size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/******************************************************************************
|
|
*
|
|
* pci_ctrl_addr_write - write the PCI controller address register
|
|
*
|
|
* This routine writes the provided data to the address register of the
|
|
* specified PCI controller.
|
|
*
|
|
* RETURNS: 0 or -1
|
|
*
|
|
*/
|
|
|
|
static int pci_ctrl_addr_write(uint32_t controller, /* controller number */
|
|
uint32_t offset, /* offset within address register */
|
|
uint32_t data, /* data to write */
|
|
uint32_t size /* size of data */
|
|
)
|
|
{
|
|
/* we only support one controller */
|
|
|
|
if (controller != DEFAULT_PCI_CONTROLLER)
|
|
return (-1);
|
|
|
|
pci_ctrl_write(PCI_CTRL_ADDR_REG + offset, data, size);
|
|
return 0;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* pci_read - read a PCI register from a device
|
|
*
|
|
* This routine reads data from a PCI device's configuration space. The
|
|
* device and register to read is specified by the address parameter ("addr")
|
|
* and must be set appropriately by the caller. The address is defined by
|
|
* the structure type pci_addr_t and contains the following members:
|
|
*
|
|
* bus: PCI bus number (0-255)
|
|
* device: PCI device number (0-31)
|
|
* func: device function number (0-7)
|
|
* reg: device 32-bit register number to read (0-63)
|
|
* offset: offset within 32-bit register to read (0-3)
|
|
*
|
|
* The size parameter specifies the number of bytes to read from the PCI
|
|
* configuration space, valid values are 1, 2, and 4 bytes. A 32-bit value
|
|
* is always returned but it will contain only the number of bytes specified
|
|
* by the size parameter.
|
|
*
|
|
* If multiple PCI controllers are present in the system, the controller id
|
|
* can be specified in the "controller" parameter. If only one controller
|
|
* is present, the id DEFAULT_PCI_CONTROLLER can be used to denote this
|
|
* controller.
|
|
*
|
|
* Example:
|
|
*
|
|
* union pci_addr_reg addr;
|
|
* uint32_t status;
|
|
*
|
|
* addr.field.bus = 0; /@ PCI bus zero @/
|
|
* addr.field.device = 1; /@ PCI device one @/
|
|
* addr.field.func = 0; /@ PCI function zero @/
|
|
* addr.field.reg = 4; /@ PCI register 4 @/
|
|
* addr.field.offset = 0; /@ PCI register offset @/
|
|
*
|
|
* pci_read (DEFAULT_PCI_CONTROLLER, addr, sizeof(uint16_t), &status);
|
|
*
|
|
*
|
|
* NOTE:
|
|
* Reading of PCI data must be performed as an atomic operation. It is up to
|
|
* the caller to enforce this.
|
|
*
|
|
* RETURNS: N/A
|
|
*
|
|
*/
|
|
|
|
void pci_read(uint32_t controller, /* PCI controller to use */
|
|
union pci_addr_reg addr, /* PCI address to read */
|
|
uint32_t size, /* size of data in bytes */
|
|
uint32_t *data /* data read from device */
|
|
)
|
|
{
|
|
uint32_t access_size;
|
|
uint32_t access_offset;
|
|
|
|
/* validate the access size */
|
|
|
|
switch (size) {
|
|
case 1:
|
|
access_size = SYS_PCI_ACCESS_8BIT;
|
|
access_offset = addr.field.offset;
|
|
break;
|
|
case 2:
|
|
access_size = SYS_PCI_ACCESS_16BIT;
|
|
access_offset = addr.field.offset;
|
|
break;
|
|
case 4:
|
|
default:
|
|
access_size = SYS_PCI_ACCESS_32BIT;
|
|
access_offset = 0;
|
|
break;
|
|
}
|
|
|
|
/* ensure enable has been set */
|
|
|
|
addr.field.enable = 1;
|
|
|
|
/* clear the offset for the address register */
|
|
|
|
addr.field.offset = 0;
|
|
|
|
/* read the data from the PCI controller */
|
|
|
|
pci_ctrl_addr_write(
|
|
controller, PCI_NO_OFFSET, addr.value, SYS_PCI_ACCESS_32BIT);
|
|
|
|
pci_ctrl_data_read(controller, access_offset, data, access_size);
|
|
}
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* pci_write - write a to a PCI register
|
|
*
|
|
* This routine writes data to a PCI device's configuration space. The
|
|
* device and register to write is specified by the address parameter ("addr")
|
|
* and must be set appropriately by the caller. The address is defined by
|
|
* the structure type pci_addr_t and contains the following members:
|
|
*
|
|
* bus: PCI bus number (0-255)
|
|
* device: PCI device number (0-31)
|
|
* func: device function number (0-7)
|
|
* reg: device register number to read (0-63)
|
|
* offset: offset within 32-bit register to write (0-3)
|
|
*
|
|
* The size parameter specifies the number of bytes to write to the PCI
|
|
* configuration space, valid values are 1, 2, and 4 bytes. A 32-bit value
|
|
* is always provided but only the number of bytes specified by the size
|
|
* parameter will be written to the device.
|
|
*
|
|
* If multiple PCI controllers are present in the system, the controller id
|
|
* can be specified in the "controller" parameter. If only one controller
|
|
* is present, the id DEFAULT_PCI_CONTROLLER can be used to denote this
|
|
* controller.
|
|
*
|
|
* Example:
|
|
*
|
|
* pci_addr_t addr;
|
|
* uint32_t bar0 = 0xE0000000;
|
|
*
|
|
* addr.field.bus = 0; /@ PCI bus zero @/
|
|
* addr.field.device = 1; /@ PCI device one @/
|
|
* addr.field.func = 0; /@ PCI function zero @/
|
|
* addr.field.reg = 16; /@ PCI register 16 @/
|
|
* addr.field.offset = 0; /@ PCI register offset @/
|
|
*
|
|
* pci_write (DEFAULT_PCI_CONTROLLER, addr, sizeof(uint32_t), bar0);
|
|
*
|
|
* NOTE:
|
|
* Writing of PCI data must be performed as an atomic operation. It is up to
|
|
* the caller to enforce this.
|
|
*
|
|
*
|
|
* RETURNS: N/A
|
|
*
|
|
*/
|
|
|
|
void pci_write(uint32_t controller, /* controller to use */
|
|
union pci_addr_reg addr, /* PCI address to read */
|
|
uint32_t size, /* size in bytes */
|
|
uint32_t data /* data to write */
|
|
)
|
|
{
|
|
uint32_t access_size;
|
|
uint32_t access_offset;
|
|
|
|
/* validate the access size */
|
|
|
|
switch (size) {
|
|
case 1:
|
|
access_size = SYS_PCI_ACCESS_8BIT;
|
|
access_offset = addr.field.offset;
|
|
break;
|
|
case 2:
|
|
access_size = SYS_PCI_ACCESS_16BIT;
|
|
access_offset = addr.field.offset;
|
|
break;
|
|
case 4:
|
|
default:
|
|
access_size = SYS_PCI_ACCESS_32BIT;
|
|
access_offset = 0;
|
|
break;
|
|
}
|
|
|
|
/* ensure enable has been set */
|
|
|
|
addr.field.enable = 1;
|
|
|
|
/* clear the offset for the address register */
|
|
|
|
addr.field.offset = 0;
|
|
|
|
/* write the data to the PCI controller */
|
|
|
|
pci_ctrl_addr_write(
|
|
controller, PCI_NO_OFFSET, addr.value, SYS_PCI_ACCESS_32BIT);
|
|
pci_ctrl_data_write(controller, access_offset, data, access_size);
|
|
}
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* pci_header_get - get the PCI header for a device
|
|
*
|
|
* This routine reads the PCI header for the specified device and puts the
|
|
* result in the supplied header structure.
|
|
*
|
|
* RETURNS: N/A
|
|
*/
|
|
|
|
void pci_header_get(uint32_t controller,
|
|
union pci_addr_reg pci_ctrl_addr,
|
|
union pci_dev *pci_dev_header)
|
|
{
|
|
uint32_t i;
|
|
|
|
/* clear out the header */
|
|
|
|
memset((char *)pci_dev_header, sizeof(union pci_dev), 0);
|
|
|
|
/* fill in the PCI header from the device */
|
|
|
|
for (i = 0; i < PCI_HEADER_WORDS; i++) {
|
|
pci_ctrl_addr.field.reg = i;
|
|
pci_read(controller,
|
|
pci_ctrl_addr,
|
|
sizeof(uint32_t),
|
|
&pci_dev_header->words.word[i]);
|
|
}
|
|
}
|
|
|