Marcin Niestroj b4854debd1 drivers: wifi: esp_at: rename driver from esp ... Recently WiFi ESP32 driver (utilizing WiFi radio in ESP32 SoC) was introduced into drivers/wifi/esp32/ and it already caused confusion as there was existing drivers/wifi/esp/ directory for ESP-AT driver (utilizing external WiFi chip, by communicating using AT commands from any serial capable platform). So question has arisen whether it is good to merge both, while they are totally different drivers. Rename ESP-AT driver to be placed in drivers/wifi/esp_at/, so that it is easier to figure out difference between "esp32" and "esp_at" just by looking at driver name. Rename also DT compatible and all Kconfig options for the same reason. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>		2021-05-06 13:21:39 -04:00
..
adafruit_2_8_tft_touch_v2	boards: shields: Enable gpio by default on adafruit_2_8_tft_touch_v2	2021-04-02 18:44:48 -04:00
adafruit_winc1500	shields: Adafruit WINC1500 Wifi Shield	2020-08-26 15:44:22 -05:00
atmel_rf2xx	boards: shields: atmel_rf2xx: Improve documentation	2020-08-17 13:36:29 -04:00
boostxl_ulpsense	shield: adding Kconfig.shield to boostxl_ulpsense shield folder	2021-02-02 19:05:47 -05:00
buydisplay_2_8_tft_touch_arduino	boards: shields: Fix path to lvgl sample in board docs	2021-03-26 08:25:30 -04:00
buydisplay_3_5_tft_touch_arduino	boards: shields: Fix path to lvgl sample in board docs	2021-03-26 08:25:30 -04:00
dac80508_evm	boards: shields: dac80508_evm: add TI DAC80508 EVM shield	2020-08-26 12:24:43 +02:00
dfrobot_can_bus_v2_0	spi-device: set CS gpio flags for all devices that had none	2020-07-09 06:07:07 -05:00
esp_8266	drivers: wifi: esp_at: rename driver from esp	2021-05-06 13:21:39 -04:00
frdm_cr20a	kconfig: Replace defconfig singe-symbol 'if's with 'depends on'	2020-02-12 10:32:13 -06:00
frdm_kw41z	boards: shields: Fix frdm_kw41z shield doc formatting	2020-07-01 08:13:41 -05:00
frdm_stbc_agm01	shields: Add the frdm_stbc_agm01 shield.	2021-02-16 16:24:18 -06:00
ftdi_vm800c	shields: FTDI VM800C	2021-03-19 19:05:53 +01:00
inventek_eswifi	boards: shields: Introduce inventek es-WIFI shield	2020-11-03 11:05:43 +01:00
link_board_eth	boards: fix SPI GPIO CS, display and link_board_eth	2020-07-07 15:08:16 +02:00
lmp90100_evb	boards: shrink image sizes	2020-02-07 13:52:45 -05:00
ls0xx_generic	boards: shields: Fix path to lvgl sample in board docs	2021-03-26 08:25:30 -04:00
mikroe_adc_click	boards: shields: mikroe_adc_click: add lpcxpresso55s16_ns support	2020-07-01 08:23:39 -05:00
mikroe_eth_click	doc: shields: H1 heading was missing for mikroe_eth_click	2020-08-10 09:07:05 -05:00
semtech_sx1272mb2das	boards: shields: Introduce Semtech SX1272 shield	2021-03-04 06:25:56 -05:00
sparkfun_sara_r4	drivers: serial: uart_mcux: Convert to DT_INST	2020-04-14 17:52:31 -05:00
ssd1306	boards: shields: Fix path to lvgl sample in board docs	2021-03-26 08:25:30 -04:00
st7735r	shields: display: Added support for ST7735r based LCD shields	2021-04-12 16:42:00 -04:00
st7789v_generic	boards: shields: Fix path to lvgl sample in board docs	2021-03-26 08:25:30 -04:00
v2c_daplink	tests/boards/samples: fixup after sdmmc driver relocation	2021-03-23 12:16:01 +01:00
waveshare_epaper	boards: shields: Fix path to lvgl sample in board docs	2021-03-26 08:25:30 -04:00
wnc_m14a2a	drivers: serial: nrf: Remove flow control configuration from kconfig	2020-06-09 19:06:16 +02:00
x_nucleo_idb05a1	boards: shrink image sizes	2020-02-07 13:52:45 -05:00
x_nucleo_iks01a1	boards/shields: x_nucleo_iks01a1: connect irq to DRDY pin	2020-02-25 11:40:17 +01:00
x_nucleo_iks01a2	board/shields: x-nucleo-iks01a2: Add support to shub mode	2020-10-14 08:41:41 -05:00
x_nucleo_iks01a3	drivers/sensor: lsm6dso: move int-pin in DTS binding	2021-04-06 15:34:01 +02:00
x_nucleo_iks02a1	drivers/sensor: ism330dhcx: Move INT_PIN Kconfig attr into DT	2021-02-28 16:47:15 -05:00
index.rst	doc: provide shield usage documentation	2018-09-21 18:51:26 -04:00