285 lines
8.3 KiB
C
285 lines
8.3 KiB
C
/*
|
|
* Copyright (c) 2017 Intel Corporation
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#ifndef ZEPHYR_DRIVERS_SENSOR_LIS2DH_LIS2DH_H_
|
|
#define ZEPHYR_DRIVERS_SENSOR_LIS2DH_LIS2DH_H_
|
|
|
|
#include <kernel.h>
|
|
#include <device.h>
|
|
#include <sys/util.h>
|
|
#include <stdint.h>
|
|
#include <drivers/gpio.h>
|
|
#include <drivers/sensor.h>
|
|
#include <string.h>
|
|
|
|
#define LIS2DH_BUS_ADDRESS DT_INST_REG_ADDR(0)
|
|
#define LIS2DH_BUS_DEV_NAME DT_INST_BUS_LABEL(0)
|
|
|
|
#define LIS2DH_REG_WAI 0x0f
|
|
#define LIS2DH_CHIP_ID 0x33
|
|
|
|
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(spi)
|
|
#include <drivers/spi.h>
|
|
|
|
#define LIS2DH_SPI_READ_BIT BIT(7)
|
|
#define LIS2DH_SPI_AUTOINC BIT(6)
|
|
#define LIS2DH_SPI_ADDR_MASK BIT_MASK(6)
|
|
|
|
/* LIS2DH supports only SPI mode 0, word size 8 bits, MSB first */
|
|
#define LIS2DH_SPI_CFG SPI_WORD_SET(8)
|
|
|
|
#elif DT_ANY_INST_ON_BUS_STATUS_OKAY(i2c)
|
|
#include <drivers/i2c.h>
|
|
#else
|
|
#error "define bus type (I2C/SPI)"
|
|
#endif
|
|
|
|
#define LIS2DH_AUTOINCREMENT_ADDR BIT(7)
|
|
|
|
#define LIS2DH_REG_CTRL0 0x1e
|
|
#define LIS2DH_SDO_PU_DISC_SHIFT 7
|
|
#define LIS2DH_SDO_PU_DISC_MASK BIT(LIS2DH_SDO_PU_DISC_SHIFT)
|
|
|
|
#define LIS2DH_REG_CTRL1 0x20
|
|
#define LIS2DH_ACCEL_XYZ_SHIFT 0
|
|
#define LIS2DH_ACCEL_X_EN_BIT BIT(0)
|
|
#define LIS2DH_ACCEL_Y_EN_BIT BIT(1)
|
|
#define LIS2DH_ACCEL_Z_EN_BIT BIT(2)
|
|
#define LIS2DH_ACCEL_EN_BITS (LIS2DH_ACCEL_X_EN_BIT | \
|
|
LIS2DH_ACCEL_Y_EN_BIT | \
|
|
LIS2DH_ACCEL_Z_EN_BIT)
|
|
#define LIS2DH_ACCEL_XYZ_MASK BIT_MASK(3)
|
|
|
|
#define LIS2DH_LP_EN_BIT_MASK BIT(3)
|
|
#if defined(CONFIG_LIS2DH_OPER_MODE_LOW_POWER)
|
|
#define LIS2DH_LP_EN_BIT BIT(3)
|
|
#else
|
|
#define LIS2DH_LP_EN_BIT 0
|
|
#endif
|
|
|
|
#define LIS2DH_ODR_1 1
|
|
#define LIS2DH_ODR_2 2
|
|
#define LIS2DH_ODR_3 3
|
|
#define LIS2DH_ODR_4 4
|
|
#define LIS2DH_ODR_5 5
|
|
#define LIS2DH_ODR_6 6
|
|
#define LIS2DH_ODR_7 7
|
|
#define LIS2DH_ODR_8 8
|
|
#define LIS2DH_ODR_9 9
|
|
|
|
#if defined(CONFIG_LIS2DH_ODR_1)
|
|
#define LIS2DH_ODR_IDX LIS2DH_ODR_1
|
|
#elif defined(CONFIG_LIS2DH_ODR_2)
|
|
#define LIS2DH_ODR_IDX LIS2DH_ODR_2
|
|
#elif defined(CONFIG_LIS2DH_ODR_3)
|
|
#define LIS2DH_ODR_IDX LIS2DH_ODR_3
|
|
#elif defined(CONFIG_LIS2DH_ODR_4) || defined(CONFIG_LIS2DH_ODR_RUNTIME)
|
|
#define LIS2DH_ODR_IDX LIS2DH_ODR_4
|
|
#elif defined(CONFIG_LIS2DH_ODR_5)
|
|
#define LIS2DH_ODR_IDX LIS2DH_ODR_5
|
|
#elif defined(CONFIG_LIS2DH_ODR_6)
|
|
#define LIS2DH_ODR_IDX LIS2DH_ODR_6
|
|
#elif defined(CONFIG_LIS2DH_ODR_7)
|
|
#define LIS2DH_ODR_IDX LIS2DH_ODR_7
|
|
#elif defined(CONFIG_LIS2DH_ODR_8)
|
|
#define LIS2DH_ODR_IDX LIS2DH_ODR_8
|
|
#elif defined(CONFIG_LIS2DH_ODR_9_NORMAL) || defined(CONFIG_LIS2DH_ODR_9_LOW)
|
|
#define LIS2DH_ODR_IDX LIS2DH_ODR_9
|
|
#endif
|
|
|
|
#define LIS2DH_ODR_SHIFT 4
|
|
#define LIS2DH_ODR_RATE(r) ((r) << LIS2DH_ODR_SHIFT)
|
|
#define LIS2DH_ODR_BITS (LIS2DH_ODR_RATE(LIS2DH_ODR_IDX))
|
|
#define LIS2DH_ODR_MASK (BIT_MASK(4) << LIS2DH_ODR_SHIFT)
|
|
|
|
#define LIS2DH_REG_CTRL2 0x21
|
|
#define LIS2DH_HPIS2_EN_BIT BIT(1)
|
|
#define LIS2DH_FDS_EN_BIT BIT(3)
|
|
|
|
#define LIS2DH_REG_CTRL3 0x22
|
|
#define LIS2DH_EN_DRDY1_INT1_SHIFT 4
|
|
#define LIS2DH_EN_DRDY1_INT1 BIT(LIS2DH_EN_DRDY1_INT1_SHIFT)
|
|
|
|
#define LIS2DH_REG_CTRL4 0x23
|
|
#define LIS2DH_FS_SHIFT 4
|
|
#define LIS2DH_FS_MASK (BIT_MASK(2) << LIS2DH_FS_SHIFT)
|
|
|
|
#if defined(CONFIG_LIS2DH_ACCEL_RANGE_2G) ||\
|
|
defined(CONFIG_LIS2DH_ACCEL_RANGE_RUNTIME)
|
|
#define LIS2DH_FS_IDX 0
|
|
#elif defined(CONFIG_LIS2DH_ACCEL_RANGE_4G)
|
|
#define LIS2DH_FS_IDX 1
|
|
#elif defined(CONFIG_LIS2DH_ACCEL_RANGE_8G)
|
|
#define LIS2DH_FS_IDX 2
|
|
#elif defined(CONFIG_LIS2DH_ACCEL_RANGE_16G)
|
|
#define LIS2DH_FS_IDX 3
|
|
#endif
|
|
|
|
#define LIS2DH_FS_SELECT(fs) ((fs) << LIS2DH_FS_SHIFT)
|
|
#define LIS2DH_FS_BITS (LIS2DH_FS_SELECT(LIS2DH_FS_IDX))
|
|
#if defined(CONFIG_LIS2DH_OPER_MODE_HIGH_RES)
|
|
#define LIS2DH_HR_BIT BIT(3)
|
|
#else
|
|
#define LIS2DH_HR_BIT 0
|
|
#endif
|
|
|
|
#define LIS2DH_REG_CTRL5 0x24
|
|
#define LIS2DH_LIR_INT2_SHIFT 1
|
|
#define LIS2DH_EN_LIR_INT2 BIT(LIS2DH_LIR_INT2_SHIFT)
|
|
|
|
#define LIS2DH_REG_CTRL6 0x25
|
|
#define LIS2DH_EN_INT2_INT2_SHIFT 5
|
|
#define LIS2DH_EN_INT2_INT2 BIT(LIS2DH_EN_INT2_INT2_SHIFT)
|
|
|
|
#define LIS2DH_REG_REFERENCE 0x26
|
|
|
|
#define LIS2DH_REG_STATUS 0x27
|
|
#define LIS2DH_STATUS_ZYZ_OVR BIT(7)
|
|
#define LIS2DH_STATUS_Z_OVR BIT(6)
|
|
#define LIS2DH_STATUS_Y_OVR BIT(5)
|
|
#define LIS2DH_STATUS_X_OVR BIT(4)
|
|
#define LIS2DH_STATUS_OVR_MASK (BIT_MASK(4) << 4)
|
|
#define LIS2DH_STATUS_ZYX_DRDY BIT(3)
|
|
#define LIS2DH_STATUS_Z_DRDY BIT(2)
|
|
#define LIS2DH_STATUS_Y_DRDY BIT(1)
|
|
#define LIS2DH_STATUS_X_DRDY BIT(0)
|
|
#define LIS2DH_STATUS_DRDY_MASK BIT_MASK(4)
|
|
|
|
#define LIS2DH_REG_ACCEL_X_LSB 0x28
|
|
#define LIS2DH_REG_ACCEL_Y_LSB 0x2A
|
|
#define LIS2DH_REG_ACCEL_Z_LSB 0x2C
|
|
#define LIS2DH_REG_ACCEL_X_MSB 0x29
|
|
#define LIS2DH_REG_ACCEL_Y_MSB 0x2B
|
|
#define LIS2DH_REG_ACCEL_Z_MSB 0x2D
|
|
|
|
#define LIS2DH_REG_INT1_CFG 0x30
|
|
#define LIS2DH_REG_INT2_CFG 0x34
|
|
#define LIS2DH_AOI_CFG BIT(7)
|
|
#define LIS2DH_INT_CFG_ZHIE_ZUPE BIT(5)
|
|
#define LIS2DH_INT_CFG_ZLIE_ZDOWNE BIT(4)
|
|
#define LIS2DH_INT_CFG_YHIE_YUPE BIT(3)
|
|
#define LIS2DH_INT_CFG_YLIE_YDOWNE BIT(2)
|
|
#define LIS2DH_INT_CFG_XHIE_XUPE BIT(1)
|
|
#define LIS2DH_INT_CFG_XLIE_XDOWNE BIT(0)
|
|
|
|
#define LIS2DH_REG_INT2_SRC 0x35
|
|
|
|
#define LIS2DH_REG_INT2_THS 0x36
|
|
|
|
#define LIS2DH_REG_INT2_DUR 0x37
|
|
|
|
/* sample buffer size includes status register */
|
|
#define LIS2DH_BUF_SZ 7
|
|
|
|
#if DT_INST_PROP_HAS_IDX(0, irq_gpios, 1)
|
|
/* INT1 and INT2 are configured */
|
|
#define LIS2DH_INT1_GPIOS_PIN DT_INST_GPIO_PIN_BY_IDX(0, irq_gpios, 0)
|
|
#define LIS2DH_INT1_GPIOS_FLAGS DT_INST_GPIO_FLAGS_BY_IDX(0, irq_gpios, 0)
|
|
#define LIS2DH_INT1_GPIO_DEV_NAME DT_INST_GPIO_LABEL_BY_IDX(0, irq_gpios, 0)
|
|
#define LIS2DH_INT2_GPIOS_PIN DT_INST_GPIO_PIN_BY_IDX(0, irq_gpios, 1)
|
|
#define LIS2DH_INT2_GPIOS_FLAGS DT_INST_GPIO_FLAGS_BY_IDX(0, irq_gpios, 1)
|
|
#define LIS2DH_INT2_GPIO_DEV_NAME DT_INST_GPIO_LABEL_BY_IDX(0, irq_gpios, 1)
|
|
#else
|
|
/* INT1 only */
|
|
#define LIS2DH_INT1_GPIOS_PIN DT_INST_GPIO_PIN(0, irq_gpios)
|
|
#define LIS2DH_INT1_GPIOS_FLAGS DT_INST_GPIO_FLAGS(0, irq_gpios)
|
|
#define LIS2DH_INT1_GPIO_DEV_NAME DT_INST_GPIO_LABEL(0, irq_gpios)
|
|
#endif
|
|
|
|
union lis2dh_sample {
|
|
uint8_t raw[LIS2DH_BUF_SZ];
|
|
struct {
|
|
uint8_t status;
|
|
int16_t xyz[3];
|
|
} __packed;
|
|
};
|
|
|
|
struct lis2dh_config {
|
|
char *bus_name;
|
|
int (*bus_init)(const struct device *dev);
|
|
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(i2c)
|
|
uint16_t i2c_slv_addr;
|
|
#elif DT_ANY_INST_ON_BUS_STATUS_OKAY(spi)
|
|
struct spi_config spi_conf;
|
|
#if DT_INST_SPI_DEV_HAS_CS_GPIOS(0)
|
|
const char *gpio_cs_port;
|
|
uint8_t cs_gpio;
|
|
uint8_t cs_gpio_flags;
|
|
#endif /* DT_INST_SPI_DEV_HAS_CS_GPIOS(0) */
|
|
#endif /* DT_ANY_INST_ON_BUS_STATUS_OKAY(spi) */
|
|
|
|
};
|
|
|
|
struct lis2dh_transfer_function {
|
|
int (*read_data)(const struct device *dev, uint8_t reg_addr,
|
|
uint8_t *value, uint8_t len);
|
|
int (*write_data)(const struct device *dev, uint8_t reg_addr,
|
|
uint8_t *value, uint8_t len);
|
|
int (*read_reg)(const struct device *dev, uint8_t reg_addr,
|
|
uint8_t *value);
|
|
int (*write_reg)(const struct device *dev, uint8_t reg_addr,
|
|
uint8_t value);
|
|
int (*update_reg)(const struct device *dev, uint8_t reg_addr,
|
|
uint8_t mask, uint8_t value);
|
|
};
|
|
|
|
struct lis2dh_data {
|
|
const struct device *bus;
|
|
const struct lis2dh_transfer_function *hw_tf;
|
|
|
|
union lis2dh_sample sample;
|
|
/* current scaling factor, in micro m/s^2 / lsb */
|
|
uint32_t scale;
|
|
|
|
#ifdef CONFIG_LIS2DH_TRIGGER
|
|
const struct device *dev;
|
|
const struct device *gpio_int1;
|
|
const struct device *gpio_int2;
|
|
struct gpio_callback gpio_int1_cb;
|
|
struct gpio_callback gpio_int2_cb;
|
|
|
|
sensor_trigger_handler_t handler_drdy;
|
|
sensor_trigger_handler_t handler_anymotion;
|
|
atomic_t trig_flags;
|
|
enum sensor_channel chan_drdy;
|
|
|
|
#if defined(CONFIG_LIS2DH_TRIGGER_OWN_THREAD)
|
|
K_KERNEL_STACK_MEMBER(thread_stack, CONFIG_LIS2DH_THREAD_STACK_SIZE);
|
|
struct k_thread thread;
|
|
struct k_sem gpio_sem;
|
|
#elif defined(CONFIG_LIS2DH_TRIGGER_GLOBAL_THREAD)
|
|
struct k_work work;
|
|
#endif
|
|
|
|
#endif /* CONFIG_LIS2DH_TRIGGER */
|
|
#if DT_INST_SPI_DEV_HAS_CS_GPIOS(0)
|
|
struct spi_cs_control cs_ctrl;
|
|
#endif /* DT_SPI_DEV_HAS_CS_GPIOS(DT_INST(0, st_lis2mdl)) */
|
|
};
|
|
|
|
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(spi)
|
|
int lis2dh_spi_access(struct lis2dh_data *ctx, uint8_t cmd,
|
|
void *data, size_t length);
|
|
#endif
|
|
|
|
#ifdef CONFIG_LIS2DH_TRIGGER
|
|
int lis2dh_trigger_set(const struct device *dev,
|
|
const struct sensor_trigger *trig,
|
|
sensor_trigger_handler_t handler);
|
|
|
|
int lis2dh_init_interrupt(const struct device *dev);
|
|
|
|
int lis2dh_acc_slope_config(const struct device *dev,
|
|
enum sensor_attribute attr,
|
|
const struct sensor_value *val);
|
|
#endif
|
|
|
|
int lis2dh_spi_init(const struct device *dev);
|
|
int lis2dh_i2c_init(const struct device *dev);
|
|
|
|
|
|
#endif /* __SENSOR_LIS2DH__ */
|