zephyr/drivers/gpio/gpio_imx.c

251 lines
6.2 KiB
C

/*
* Copyright (c) 2018-2019, NXP
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT nxp_imx_gpio
#include <errno.h>
#include <device.h>
#include <drivers/gpio.h>
#include <soc.h>
#include <sys/util.h>
#include <gpio_imx.h>
#include "gpio_utils.h"
struct imx_gpio_config {
/* gpio_driver_config needs to be first */
struct gpio_driver_config common;
GPIO_Type *base;
};
struct imx_gpio_data {
/* gpio_driver_data needs to be first */
struct gpio_driver_data common;
/* port ISR callback routine address */
sys_slist_t callbacks;
};
static int imx_gpio_configure(const struct device *port, gpio_pin_t pin,
gpio_flags_t flags)
{
const struct imx_gpio_config *config = port->config;
GPIO_Type *base = config->base;
if (((flags & GPIO_INPUT) != 0U) && ((flags & GPIO_OUTPUT) != 0U)) {
return -ENOTSUP;
}
if ((flags & (GPIO_SINGLE_ENDED
| GPIO_PULL_UP
| GPIO_PULL_DOWN)) != 0U) {
return -ENOTSUP;
}
/* Disable interrupts for pin */
GPIO_SetPinIntMode(base, pin, false);
GPIO_SetIntEdgeSelect(base, pin, false);
if ((flags & GPIO_OUTPUT) != 0U) {
/* Set output pin initial value */
if ((flags & GPIO_OUTPUT_INIT_LOW) != 0U) {
GPIO_WritePinOutput(base, pin, gpioPinClear);
} else if ((flags & GPIO_OUTPUT_INIT_HIGH) != 0U) {
GPIO_WritePinOutput(base, pin, gpioPinSet);
}
/* Set pin as output */
WRITE_BIT(base->GDIR, pin, 1U);
} else {
/* Set pin as input */
WRITE_BIT(base->GDIR, pin, 0U);
}
return 0;
}
static int imx_gpio_port_get_raw(const struct device *port, uint32_t *value)
{
const struct imx_gpio_config *config = port->config;
GPIO_Type *base = config->base;
*value = GPIO_ReadPortInput(base);
return 0;
}
static int imx_gpio_port_set_masked_raw(const struct device *port,
gpio_port_pins_t mask,
gpio_port_value_t value)
{
const struct imx_gpio_config *config = port->config;
GPIO_Type *base = config->base;
GPIO_WritePortOutput(base,
(GPIO_ReadPortInput(base) & ~mask) | (value & mask));
return 0;
}
static int imx_gpio_port_set_bits_raw(const struct device *port,
gpio_port_pins_t pins)
{
const struct imx_gpio_config *config = port->config;
GPIO_Type *base = config->base;
GPIO_WritePortOutput(base, GPIO_ReadPortInput(base) | pins);
return 0;
}
static int imx_gpio_port_clear_bits_raw(const struct device *port,
gpio_port_pins_t pins)
{
const struct imx_gpio_config *config = port->config;
GPIO_Type *base = config->base;
GPIO_WritePortOutput(base, GPIO_ReadPortInput(base) & ~pins);
return 0;
}
static int imx_gpio_port_toggle_bits(const struct device *port,
gpio_port_pins_t pins)
{
const struct imx_gpio_config *config = port->config;
GPIO_Type *base = config->base;
GPIO_WritePortOutput(base, GPIO_ReadPortInput(base) ^ pins);
return 0;
}
static int imx_gpio_pin_interrupt_configure(const struct device *port,
gpio_pin_t pin,
enum gpio_int_mode mode,
enum gpio_int_trig trig)
{
const struct imx_gpio_config *config = port->config;
GPIO_Type *base = config->base;
volatile uint32_t *icr_reg;
unsigned int key;
uint32_t icr_val;
uint8_t shift;
if (((base->GDIR & BIT(pin)) != 0U)
&& (mode != GPIO_INT_MODE_DISABLED)) {
/* Interrupt on output pin not supported */
return -ENOTSUP;
}
if ((mode == GPIO_INT_MODE_EDGE) && (trig == GPIO_INT_TRIG_LOW)) {
icr_val = 3U;
} else if ((mode == GPIO_INT_MODE_EDGE) &&
(trig == GPIO_INT_TRIG_HIGH)) {
icr_val = 2U;
} else if ((mode == GPIO_INT_MODE_LEVEL) &&
(trig == GPIO_INT_TRIG_HIGH)) {
icr_val = 1U;
} else {
icr_val = 0U;
}
if (pin < 16U) {
shift = 2U * pin;
icr_reg = &(base->ICR1);
} else if (pin < 32U) {
shift = 2U * (pin - 16U);
icr_reg = &(base->ICR2);
} else {
return -EINVAL;
}
key = irq_lock();
*icr_reg = (*icr_reg & ~(3U << shift)) | (icr_val << shift);
WRITE_BIT(base->EDGE_SEL, pin, trig == GPIO_INT_TRIG_BOTH);
WRITE_BIT(base->ISR, pin, mode != GPIO_INT_MODE_DISABLED);
WRITE_BIT(base->IMR, pin, mode != GPIO_INT_MODE_DISABLED);
irq_unlock(key);
return 0;
}
static int imx_gpio_manage_callback(const struct device *port,
struct gpio_callback *cb, bool set)
{
struct imx_gpio_data *data = port->data;
return gpio_manage_callback(&data->callbacks, cb, set);
}
static void imx_gpio_port_isr(const struct device *port)
{
const struct imx_gpio_config *config = port->config;
struct imx_gpio_data *data = port->data;
uint32_t int_status;
int_status = config->base->ISR;
config->base->ISR = int_status;
gpio_fire_callbacks(&data->callbacks, port, int_status);
}
static const struct gpio_driver_api imx_gpio_driver_api = {
.pin_configure = imx_gpio_configure,
.port_get_raw = imx_gpio_port_get_raw,
.port_set_masked_raw = imx_gpio_port_set_masked_raw,
.port_set_bits_raw = imx_gpio_port_set_bits_raw,
.port_clear_bits_raw = imx_gpio_port_clear_bits_raw,
.port_toggle_bits = imx_gpio_port_toggle_bits,
.pin_interrupt_configure = imx_gpio_pin_interrupt_configure,
.manage_callback = imx_gpio_manage_callback,
};
#define GPIO_IMX_INIT(n) \
static int imx_gpio_##n##_init(const struct device *port); \
\
static const struct imx_gpio_config imx_gpio_##n##_config = { \
.common = { \
.port_pin_mask = \
GPIO_PORT_PIN_MASK_FROM_DT_INST(n), \
}, \
.base = (GPIO_Type *)DT_INST_REG_ADDR(n), \
}; \
\
static struct imx_gpio_data imx_gpio_##n##_data; \
\
DEVICE_AND_API_INIT(imx_gpio_##n, DT_INST_LABEL(n), \
imx_gpio_##n##_init, \
&imx_gpio_##n##_data, \
&imx_gpio_##n##_config, \
POST_KERNEL, \
CONFIG_KERNEL_INIT_PRIORITY_DEFAULT, \
&imx_gpio_driver_api); \
\
static int imx_gpio_##n##_init(const struct device *port) \
{ \
IRQ_CONNECT(DT_INST_IRQ_BY_IDX(n, 0, irq), \
DT_INST_IRQ_BY_IDX(n, 0, priority), \
imx_gpio_port_isr, \
DEVICE_GET(imx_gpio_##n), 0); \
\
irq_enable(DT_INST_IRQ_BY_IDX(n, 0, irq)); \
\
IRQ_CONNECT(DT_INST_IRQ_BY_IDX(n, 1, irq), \
DT_INST_IRQ_BY_IDX(n, 1, priority), \
imx_gpio_port_isr, \
DEVICE_GET(imx_gpio_##n), 0); \
\
irq_enable(DT_INST_IRQ_BY_IDX(n, 1, irq)); \
\
return 0; \
}
DT_INST_FOREACH_STATUS_OKAY(GPIO_IMX_INIT)