370 lines
8.8 KiB
C
370 lines
8.8 KiB
C
/*
|
|
* Copyright (c) 2017 Intel Corporation
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT espressif_esp32_gpio
|
|
|
|
/* Include esp-idf headers first to avoid redefining BIT() macro */
|
|
#include <soc/dport_reg.h>
|
|
#include <soc/gpio_reg.h>
|
|
#include <soc/io_mux_reg.h>
|
|
#include <soc/soc.h>
|
|
|
|
#include <soc.h>
|
|
#include <errno.h>
|
|
#include <device.h>
|
|
#include <drivers/gpio.h>
|
|
#include <kernel.h>
|
|
#include <sys/util.h>
|
|
#include <drivers/pinmux.h>
|
|
|
|
#include "gpio_utils.h"
|
|
|
|
#define GET_GPIO_PIN_REG(pin) ((uint32_t *)GPIO_REG(pin))
|
|
|
|
/* ESP3 TRM v4.0 and gpio_reg.h header both incorrectly identify bit3
|
|
* as being the bit selecting PRO CPU interrupt enable. It's actually
|
|
* bit2. bit4 and bit5 are also shifted.
|
|
*/
|
|
#define GPIO_CPU0_INT_ENABLE (BIT(2) << GPIO_PIN_INT_ENA_S)
|
|
|
|
/* ESP3 TRM table 8: CPU Interrupts
|
|
*
|
|
* Edge-triggered are: 10, 22, 28, 30
|
|
* Level-triggered are: 0-5, 8, 9, 12, 13, 17-21, 23-27, 31
|
|
*/
|
|
#define ESP32_IRQ_EDGE_TRIG 0x50400400
|
|
#define ESP32_IRQ_LEVEL_TRIG 0x8fbe333f
|
|
|
|
struct gpio_esp32_data {
|
|
/* gpio_driver_data needs to be first */
|
|
struct gpio_driver_data common;
|
|
const struct device *pinmux;
|
|
|
|
struct {
|
|
volatile uint32_t *set_reg;
|
|
volatile uint32_t *clear_reg;
|
|
volatile uint32_t *input_reg;
|
|
volatile uint32_t *output_reg;
|
|
volatile uint32_t *irq_status_reg;
|
|
volatile uint32_t *irq_ack_reg;
|
|
int pin_offset;
|
|
} port;
|
|
|
|
sys_slist_t cb;
|
|
};
|
|
|
|
static int gpio_esp32_config(const struct device *dev,
|
|
gpio_pin_t pin,
|
|
gpio_flags_t flags)
|
|
{
|
|
struct gpio_esp32_data *data = dev->data;
|
|
uint32_t io_pin = pin + data->port.pin_offset; /* Range from 0 - 39 */
|
|
uint32_t *reg = GET_GPIO_PIN_REG(io_pin);
|
|
uint32_t func;
|
|
int r;
|
|
|
|
/* Query pinmux to validate pin number. */
|
|
r = pinmux_pin_get(data->pinmux, io_pin, &func);
|
|
if (r < 0) {
|
|
return r;
|
|
}
|
|
|
|
/* Set pin function as GPIO */
|
|
pinmux_pin_set(data->pinmux, io_pin, PIN_FUNC_GPIO);
|
|
|
|
|
|
if (flags & GPIO_PULL_UP) {
|
|
pinmux_pin_pullup(data->pinmux, io_pin, PINMUX_PULLUP_ENABLE);
|
|
} else if (flags & GPIO_PULL_DOWN) {
|
|
pinmux_pin_pullup(data->pinmux, io_pin, PINMUX_PULLUP_DISABLE);
|
|
}
|
|
|
|
if (flags & GPIO_OUTPUT) {
|
|
|
|
if (flags & GPIO_SINGLE_ENDED) {
|
|
if (flags & GPIO_LINE_OPEN_DRAIN) {
|
|
*reg |= GPIO_PIN_PAD_DRIVER;
|
|
} else {
|
|
r = -ENOTSUP;
|
|
}
|
|
} else {
|
|
*reg &= ~GPIO_PIN_PAD_DRIVER;
|
|
}
|
|
|
|
/* Set output pin initial value */
|
|
if (flags & GPIO_OUTPUT_INIT_HIGH) {
|
|
*data->port.set_reg = BIT(pin);
|
|
} else if (flags & GPIO_OUTPUT_INIT_LOW) {
|
|
*data->port.clear_reg = BIT(pin);
|
|
}
|
|
|
|
r = pinmux_pin_input_enable(data->pinmux, io_pin,
|
|
PINMUX_OUTPUT_ENABLED);
|
|
if (r < 0) {
|
|
return r;
|
|
}
|
|
|
|
} else { /* Input */
|
|
pinmux_pin_input_enable(data->pinmux, io_pin,
|
|
PINMUX_INPUT_ENABLED);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_esp32_port_get_raw(const struct device *port, uint32_t *value)
|
|
{
|
|
struct gpio_esp32_data *data = port->data;
|
|
|
|
*value = *data->port.input_reg;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_esp32_port_set_masked_raw(const struct device *port,
|
|
uint32_t mask, uint32_t value)
|
|
{
|
|
struct gpio_esp32_data *data = port->data;
|
|
uint32_t key;
|
|
|
|
key = irq_lock();
|
|
*data->port.output_reg = (*data->port.output_reg & ~mask)
|
|
| (mask & value);
|
|
irq_unlock(key);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_esp32_port_set_bits_raw(const struct device *port,
|
|
uint32_t pins)
|
|
{
|
|
struct gpio_esp32_data *data = port->data;
|
|
|
|
*data->port.set_reg = pins;
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_esp32_port_clear_bits_raw(const struct device *port,
|
|
uint32_t pins)
|
|
{
|
|
struct gpio_esp32_data *data = port->data;
|
|
|
|
*data->port.clear_reg = pins;
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_esp32_port_toggle_bits(const struct device *port,
|
|
uint32_t pins)
|
|
{
|
|
struct gpio_esp32_data *data = port->data;
|
|
uint32_t key;
|
|
|
|
key = irq_lock();
|
|
*data->port.output_reg = (*data->port.output_reg ^ pins);
|
|
irq_unlock(key);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int convert_int_type(enum gpio_int_mode mode,
|
|
enum gpio_int_trig trig)
|
|
{
|
|
/* Reference: "ESP32 Technical Reference Manual" > "IO_MUX and
|
|
* GPIO matrix" > "GPIO_PINn_INT_TYPE".
|
|
*/
|
|
|
|
if (mode == GPIO_INT_MODE_DISABLED) {
|
|
return 0; /* Disables interrupt for a pin. */
|
|
}
|
|
|
|
if (mode == GPIO_INT_MODE_LEVEL) {
|
|
if ((ESP32_IRQ_LEVEL_TRIG & BIT(CONFIG_GPIO_ESP32_IRQ)) == 0) {
|
|
return -ENOTSUP;
|
|
}
|
|
switch (trig) {
|
|
case GPIO_INT_TRIG_LOW:
|
|
return 4;
|
|
case GPIO_INT_TRIG_HIGH:
|
|
return 5;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
} else { /* edge interrupts */
|
|
if ((ESP32_IRQ_EDGE_TRIG & BIT(CONFIG_GPIO_ESP32_IRQ)) == 0) {
|
|
return -ENOTSUP;
|
|
}
|
|
switch (trig) {
|
|
case GPIO_INT_TRIG_HIGH:
|
|
return 1;
|
|
case GPIO_INT_TRIG_LOW:
|
|
return 2;
|
|
case GPIO_INT_TRIG_BOTH:
|
|
/* This is supposed to work but doesn't */
|
|
return -ENOTSUP; /* 3 == any edge */
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Any other type of interrupt triggering is invalid. */
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int gpio_esp32_pin_interrupt_configure(const struct device *port,
|
|
gpio_pin_t pin,
|
|
enum gpio_int_mode mode,
|
|
enum gpio_int_trig trig)
|
|
{
|
|
struct gpio_esp32_data *data = port->data;
|
|
uint32_t io_pin = pin + data->port.pin_offset; /* Range from 0 - 39 */
|
|
uint32_t *reg = GET_GPIO_PIN_REG(io_pin);
|
|
int intr_trig_mode = convert_int_type(mode, trig);
|
|
uint32_t reg_val;
|
|
uint32_t key;
|
|
|
|
if (intr_trig_mode < 0) {
|
|
return intr_trig_mode;
|
|
}
|
|
|
|
key = irq_lock();
|
|
|
|
reg_val = *reg;
|
|
reg_val &= ~(GPIO_PIN_INT_ENA_M | GPIO_PIN_INT_TYPE_M);
|
|
/* Enable Interrupt on CPU0 (PRO_CPU) */
|
|
reg_val |= GPIO_CPU0_INT_ENABLE;
|
|
/* Interrupt triggering mode */
|
|
reg_val |= intr_trig_mode << GPIO_PIN_INT_TYPE_S;
|
|
*reg = reg_val;
|
|
|
|
irq_unlock(key);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_esp32_manage_callback(const struct device *dev,
|
|
struct gpio_callback *callback,
|
|
bool set)
|
|
{
|
|
struct gpio_esp32_data *data = dev->data;
|
|
|
|
return gpio_manage_callback(&data->cb, callback, set);
|
|
}
|
|
|
|
static void gpio_esp32_fire_callbacks(const struct device *device)
|
|
{
|
|
struct gpio_esp32_data *data = device->data;
|
|
uint32_t irq_status = *data->port.irq_status_reg;
|
|
|
|
*data->port.irq_ack_reg = irq_status;
|
|
|
|
gpio_fire_callbacks(&data->cb, device, irq_status);
|
|
}
|
|
|
|
static void gpio_esp32_isr(const void *param);
|
|
|
|
static int gpio_esp32_init(const struct device *device)
|
|
{
|
|
struct gpio_esp32_data *data = device->data;
|
|
static bool isr_connected;
|
|
|
|
data->pinmux = device_get_binding(CONFIG_PINMUX_NAME);
|
|
if (!data->pinmux) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if (!isr_connected) {
|
|
irq_disable(CONFIG_GPIO_ESP32_IRQ);
|
|
|
|
IRQ_CONNECT(CONFIG_GPIO_ESP32_IRQ, 1, gpio_esp32_isr,
|
|
NULL, 0);
|
|
|
|
esp32_rom_intr_matrix_set(0, ETS_GPIO_INTR_SOURCE,
|
|
CONFIG_GPIO_ESP32_IRQ);
|
|
|
|
irq_enable(CONFIG_GPIO_ESP32_IRQ);
|
|
|
|
isr_connected = true;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct gpio_driver_api gpio_esp32_driver = {
|
|
.pin_configure = gpio_esp32_config,
|
|
.port_get_raw = gpio_esp32_port_get_raw,
|
|
.port_set_masked_raw = gpio_esp32_port_set_masked_raw,
|
|
.port_set_bits_raw = gpio_esp32_port_set_bits_raw,
|
|
.port_clear_bits_raw = gpio_esp32_port_clear_bits_raw,
|
|
.port_toggle_bits = gpio_esp32_port_toggle_bits,
|
|
.pin_interrupt_configure = gpio_esp32_pin_interrupt_configure,
|
|
.manage_callback = gpio_esp32_manage_callback,
|
|
};
|
|
|
|
#if defined(CONFIG_GPIO_ESP32_0)
|
|
static struct gpio_esp32_data gpio_0_data = { /* 0..31 */
|
|
.port = {
|
|
.set_reg = (uint32_t *)GPIO_OUT_W1TS_REG,
|
|
.clear_reg = (uint32_t *)GPIO_OUT_W1TC_REG,
|
|
.input_reg = (uint32_t *)GPIO_IN_REG,
|
|
.output_reg = (uint32_t *)GPIO_OUT_REG,
|
|
.irq_status_reg = (uint32_t *)GPIO_STATUS_REG,
|
|
.irq_ack_reg = (uint32_t *)GPIO_STATUS_W1TC_REG,
|
|
.pin_offset = 0,
|
|
}
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_GPIO_ESP32_1)
|
|
static struct gpio_esp32_data gpio_1_data = { /* 32..39 */
|
|
.port = {
|
|
.set_reg = (uint32_t *)GPIO_OUT1_W1TS_REG,
|
|
.clear_reg = (uint32_t *)GPIO_OUT1_W1TC_REG,
|
|
.input_reg = (uint32_t *)GPIO_IN1_REG,
|
|
.output_reg = (uint32_t *)GPIO_OUT1_REG,
|
|
.irq_status_reg = (uint32_t *)GPIO_STATUS1_REG,
|
|
.irq_ack_reg = (uint32_t *)GPIO_STATUS1_W1TC_REG,
|
|
.pin_offset = 32,
|
|
}
|
|
};
|
|
#endif
|
|
|
|
#define GPIO_DEVICE_INIT(_id) \
|
|
static struct gpio_driver_config gpio_##_id##_cfg = { \
|
|
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(_id), \
|
|
}; \
|
|
DEVICE_AND_API_INIT(gpio_esp32_##_id, \
|
|
DT_INST_LABEL(_id), \
|
|
gpio_esp32_init, \
|
|
&gpio_##_id##_data, &gpio_##_id##_cfg, \
|
|
POST_KERNEL, \
|
|
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, \
|
|
&gpio_esp32_driver)
|
|
|
|
/* GPIOs are divided in two groups for ESP32 because the callback
|
|
* API works with 32-bit bitmasks to manage interrupt callbacks,
|
|
* and the device has 40 GPIO pins.
|
|
*/
|
|
#if defined(CONFIG_GPIO_ESP32_0)
|
|
GPIO_DEVICE_INIT(0);
|
|
#endif
|
|
|
|
#if defined(CONFIG_GPIO_ESP32_1)
|
|
GPIO_DEVICE_INIT(1);
|
|
#endif
|
|
|
|
static void gpio_esp32_isr(const void *param)
|
|
{
|
|
|
|
#if defined(CONFIG_GPIO_ESP32_0)
|
|
gpio_esp32_fire_callbacks(DEVICE_GET(gpio_esp32_0));
|
|
#endif
|
|
#if defined(CONFIG_GPIO_ESP32_1)
|
|
gpio_esp32_fire_callbacks(DEVICE_GET(gpio_esp32_1));
|
|
#endif
|
|
|
|
ARG_UNUSED(param);
|
|
}
|