78 lines
2.1 KiB
C
78 lines
2.1 KiB
C
/*
|
|
* Copyright (c) 2018 Aapo Vienamo
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <init.h>
|
|
#include <drivers/gpio.h>
|
|
#include <sys/printk.h>
|
|
|
|
#define VDD_PWR_CTRL_GPIO_PIN 30
|
|
#define CCS_VDD_PWR_CTRL_GPIO_PIN 10
|
|
|
|
struct pwr_ctrl_cfg {
|
|
const char *port;
|
|
uint32_t pin;
|
|
};
|
|
|
|
static int pwr_ctrl_init(struct device *dev)
|
|
{
|
|
const struct pwr_ctrl_cfg *cfg = dev->config_info;
|
|
struct device *gpio;
|
|
|
|
gpio = device_get_binding(cfg->port);
|
|
if (!gpio) {
|
|
printk("Could not bind device \"%s\"\n", cfg->port);
|
|
return -ENODEV;
|
|
}
|
|
|
|
gpio_pin_configure(gpio, cfg->pin, GPIO_OUTPUT_HIGH);
|
|
|
|
k_sleep(K_MSEC(1)); /* Wait for the rail to come up and stabilize */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The CCS811 sensor is connected to the CCS_VDD power rail, which is downstream
|
|
* from the VDD power rail. Both of these power rails need to be enabled before
|
|
* the sensor driver init can be performed. The VDD rail also has to be powered up
|
|
* before the CCS_VDD rail. These checks are to enforce the power up sequence
|
|
* constraints.
|
|
*/
|
|
|
|
#if CONFIG_BOARD_VDD_PWR_CTRL_INIT_PRIORITY <= CONFIG_GPIO_NRF_INIT_PRIORITY
|
|
#error GPIO_NRF_INIT_PRIORITY must be lower than \
|
|
BOARD_VDD_PWR_CTRL_INIT_PRIORITY
|
|
#endif
|
|
|
|
static const struct pwr_ctrl_cfg vdd_pwr_ctrl_cfg = {
|
|
.port = DT_LABEL(DT_NODELABEL(gpio0)),
|
|
.pin = VDD_PWR_CTRL_GPIO_PIN,
|
|
};
|
|
|
|
DEVICE_INIT(vdd_pwr_ctrl_init, "", pwr_ctrl_init, NULL, &vdd_pwr_ctrl_cfg,
|
|
POST_KERNEL, CONFIG_BOARD_VDD_PWR_CTRL_INIT_PRIORITY);
|
|
|
|
#ifdef CONFIG_SENSOR
|
|
|
|
#if CONFIG_BOARD_CCS_VDD_PWR_CTRL_INIT_PRIORITY <= CONFIG_BOARD_VDD_PWR_CTRL_INIT_PRIORITY
|
|
#error BOARD_VDD_PWR_CTRL_INIT_PRIORITY must be lower than BOARD_CCS_VDD_PWR_CTRL_INIT_PRIORITY
|
|
#endif
|
|
|
|
#if CONFIG_SENSOR_INIT_PRIORITY <= CONFIG_BOARD_CCS_VDD_PWR_CTRL_INIT_PRIORITY
|
|
#error BOARD_CCS_VDD_PWR_CTRL_INIT_PRIORITY must be lower than SENSOR_INIT_PRIORITY
|
|
#endif
|
|
|
|
static const struct pwr_ctrl_cfg ccs_vdd_pwr_ctrl_cfg = {
|
|
.port = DT_LABEL(DT_INST(0, semtech_sx1509b)),
|
|
.pin = CCS_VDD_PWR_CTRL_GPIO_PIN,
|
|
};
|
|
|
|
DEVICE_INIT(ccs_vdd_pwr_ctrl_init, "", pwr_ctrl_init, NULL,
|
|
&ccs_vdd_pwr_ctrl_cfg, POST_KERNEL,
|
|
CONFIG_BOARD_CCS_VDD_PWR_CTRL_INIT_PRIORITY);
|
|
|
|
#endif
|