227 lines
6.4 KiB
C
227 lines
6.4 KiB
C
/**
|
|
* Synopsys DesignWare Sensor and Control IP Subsystem IO Software Driver and
|
|
* documentation (hereinafter, "Software") is an Unsupported proprietary work
|
|
* of Synopsys, Inc. unless otherwise expressly agreed to in writing between
|
|
* Synopsys and you.
|
|
*
|
|
* The Software IS NOT an item of Licensed Software or Licensed Product under
|
|
* any End User Software License Agreement or Agreement for Licensed Product
|
|
* with Synopsys or any supplement thereto. You are permitted to use and
|
|
* redistribute this Software in source and binary forms, with or without
|
|
* modification, provided that redistributions of source code must retain this
|
|
* notice. You may not view, use, disclose, copy or distribute this file or
|
|
* any information contained herein except pursuant to this license grant from
|
|
* Synopsys. If you do not agree with this notice, including the disclaimer
|
|
* below, then you are not authorized to use the Software.
|
|
*
|
|
* THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
|
|
* DAMAGE.
|
|
*/
|
|
|
|
/**
|
|
* @file
|
|
*
|
|
* @brief Designware ADC header file
|
|
*/
|
|
|
|
#ifndef ZEPHYR_DRIVERS_ADC_ADC_INTEL_QUARK_SE_C1000_SS_H_
|
|
#define ZEPHYR_DRIVERS_ADC_ADC_INTEL_QUARK_SE_C1000_SS_H_
|
|
|
|
#include <zephyr/types.h>
|
|
#include <adc.h>
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/**
|
|
* ADC driver name.
|
|
*
|
|
* Name for the singleton instance of the ADC driver.
|
|
*
|
|
*/
|
|
#define ADC_DRV_NAME "adc"
|
|
|
|
/**
|
|
* Number of buffers.
|
|
*
|
|
* Number of reception buffers to be supported by the driver.
|
|
*/
|
|
#define BUFS_NUM 32
|
|
|
|
/* EAI ADC device registers */
|
|
#define ADC_SET (0x00)
|
|
#define ADC_DIVSEQSTAT (0x01)
|
|
#define ADC_SEQ (0x02)
|
|
#define ADC_CTRL (0x03)
|
|
#define ADC_INTSTAT (0x04)
|
|
#define ADC_SAMPLE (0x05)
|
|
|
|
/* Sensor Subsystem Interrupt Routing Mask */
|
|
#define INT_SS_ADC_ERR_MASK (0x400)
|
|
#define INT_SS_ADC_IRQ_MASK (0x404)
|
|
|
|
/* ADC_DIVSEQSTAT register */
|
|
#define ADC_DIVSEQSTAT_CLK_RATIO_MASK (0x1fffff)
|
|
|
|
/* ADC_SET register */
|
|
#define ADC_SET_POP_RX BIT(31)
|
|
#define ADC_SET_FLUSH_RX BIT(30)
|
|
#define ADC_SET_SEQ_MODE_MASK BIT(13)
|
|
#define ADC_SET_INPUT_MODE_MASK BIT(5)
|
|
#define ADC_SET_THRESHOLD_MASK (0x3F000000)
|
|
#define ADC_SET_THRESHOLD_POS 24
|
|
#define ADC_SET_SEQ_ENTRIES_MASK (0x003F0000)
|
|
#define ADC_SET_SEQ_ENTRIES_POS 16
|
|
|
|
/* ADC_CTRL register */
|
|
#define ADC_CTRL_CLR_DATA_A BIT(16)
|
|
#define ADC_CTRL_SEQ_TABLE_RST BIT(6)
|
|
#define ADC_CTRL_SEQ_PTR_RST BIT(5)
|
|
#define ADC_CTRL_SEQ_START BIT(4)
|
|
#define ADC_CTRL_CLK_ENABLE BIT(2)
|
|
#define ADC_CTRL_INT_CLR_ALL (0x000F0000)
|
|
#define ADC_CTRL_INT_MASK_ALL (0x00000F00)
|
|
|
|
#define ADC_CTRL_ENABLE BIT(1)
|
|
#define ADC_CTRL_DISABLE (0x0)
|
|
|
|
/* ADC_INTSTAT register */
|
|
#define ADC_INTSTAT_SEQERROR BIT(3)
|
|
#define ADC_INTSTAT_UNDERFLOW BIT(2)
|
|
#define ADC_INTSTAT_OVERFLOW BIT(1)
|
|
#define ADC_INTSTAT_DATA_A BIT(0)
|
|
|
|
#define ADC_STATE_CLOSED 0
|
|
#define ADC_STATE_DISABLED 1
|
|
#define ADC_STATE_IDLE 2
|
|
#define ADC_STATE_SAMPLING 3
|
|
#define ADC_STATE_ERROR 4
|
|
|
|
#define ADC_CMD_RESET_CALIBRATION 2
|
|
#define ADC_CMD_START_CALIBRATION 3
|
|
#define ADC_CMD_LOAD_CALIBRATION 4
|
|
|
|
#define IO_ADC_SET_CLK_DIVIDER (0x20)
|
|
#define IO_ADC_SET_CONFIG (0x21)
|
|
#define IO_ADC_SET_SEQ_TABLE (0x22)
|
|
#define IO_ADC_SET_SEQ_MODE (0x23)
|
|
#define IO_ADC_SET_SEQ_STOP (0x24)
|
|
#define IO_ADC_SET_RX_THRESHOLD (0x25)
|
|
|
|
#define IO_ADC_INPUT_SINGLE_END 0
|
|
#define IO_ADC_INPUT_DIFF 1
|
|
#define IO_ADC_OUTPUT_PARAL 0
|
|
#define IO_ADC_OUTPUT_SERIAL 1
|
|
#define IO_ADC_CAPTURE_RISING_EDGE 0
|
|
#define IO_ADC_CAPTURE_FALLING_EDGE 1
|
|
|
|
#define IO_ADC_SEQ_MODE_SINGLESHOT 0
|
|
#define IO_ADC_SEQ_MODE_REPETITIVE 1
|
|
|
|
#define ENABLE_SSS_INTERRUPTS ~(0x01 << 8)
|
|
|
|
#define ENABLE_ADC \
|
|
( \
|
|
ADC_CTRL_CLK_ENABLE \
|
|
| ADC_CTRL_SEQ_TABLE_RST \
|
|
| ADC_CTRL_SEQ_PTR_RST \
|
|
)
|
|
|
|
#define START_ADC_SEQ \
|
|
( \
|
|
ADC_CTRL_SEQ_START \
|
|
| ADC_CTRL_ENABLE \
|
|
| ADC_CTRL_CLK_ENABLE \
|
|
)
|
|
|
|
#define DW_CHANNEL_COUNT 19
|
|
|
|
/** mV = 3.3V*/
|
|
#define ADC_VREF 3300
|
|
|
|
/**
|
|
*
|
|
* @brief Converts ADC raw data into mV
|
|
*
|
|
* The ADC raw data readings are converted into mV:
|
|
* result = (data * ADC_VREF) / (2^resolution).
|
|
*
|
|
* @param _data_ Raw data to be converted.
|
|
* @param _resolution_ Resolution used during the data sampling.
|
|
*
|
|
* @return data read in mVolts.
|
|
*/
|
|
#define ss_adc_data_to_mv(_data_, _resolution_) \
|
|
((_data_ * ADC_VREF) / (1 << _resolution_))
|
|
|
|
typedef void (*adc_intel_quark_se_c1000_ss_config_t)(void);
|
|
/** @brief ADC configuration
|
|
* This structure defines the ADC configuration values
|
|
* that define the ADC hardware instance and configuration.
|
|
*/
|
|
struct adc_config {
|
|
/**Register base address for hardware registers.*/
|
|
u32_t reg_base;
|
|
/**IIO address for the IRQ mask register.*/
|
|
u32_t reg_irq_mask;
|
|
/**IIO address for the error mask register.*/
|
|
u32_t reg_err_mask;
|
|
/**Output mode*/
|
|
u8_t out_mode;
|
|
/**Capture mode*/
|
|
u8_t capture_mode;
|
|
/**Sequence mode*/
|
|
u8_t seq_mode;
|
|
/**Serial delay*/
|
|
u8_t serial_dly;
|
|
/**Sample width*/
|
|
u8_t sample_width;
|
|
u8_t padding[3];
|
|
/**Clock ratio*/
|
|
u32_t clock_ratio;
|
|
/**Config handler*/
|
|
adc_intel_quark_se_c1000_ss_config_t config_func;
|
|
};
|
|
|
|
/**@brief ADC information and data.
|
|
*
|
|
* This structure defines the data that will be used
|
|
* during driver execution.
|
|
*/
|
|
struct adc_info {
|
|
struct device *dev;
|
|
struct adc_context ctx;
|
|
u16_t *buffer;
|
|
u32_t active_channels;
|
|
u32_t channels;
|
|
u32_t channel_id;
|
|
|
|
/**Sequence entries' array*/
|
|
const struct adc_sequence *entries;
|
|
/**State of execution of the driver*/
|
|
u8_t state;
|
|
/**Sequence size*/
|
|
u8_t seq_size;
|
|
#ifdef CONFIG_ADC_INTEL_QUARK_SE_C1000_SS_CALIBRATION
|
|
/**Calibration value*/
|
|
u8_t calibration_value;
|
|
#endif
|
|
|
|
};
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* ZEPHYR_DRIVERS_ADC_ADC_INTEL_QUARK_SE_C1000_SS_H_ */
|