zephyr/arch/arc/soc/em9d/Kconfig.defconfig

262 lines
3.8 KiB
Plaintext

#
# Copyright (c) 2014 Wind River Systems, Inc.
# Copyright (c) 2016 Synopsys, Inc. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
if SOC_EM9D
config SOC
default em9d
config NUM_IRQ_PRIO_LEVELS
# This processor supports 4 priority levels:
# 0 for Fast Interrupts (FIRQs) and 1-3 for Regular Interrupts (IRQs).
# TODO: But regular irq nesting is not implemented --
# so this must be 2 for now.
default 2
config NUM_REGULAR_IRQ_PRIO_LEVELS
# This processor supports 3 Regular Interrupt priority level (1-3).
# TODO: But regular irq nesting is not implemented -- so use 1.
default 1
config NUM_IRQS
# must be > the highest interrupt number used
default 36
config SYS_CLOCK_HW_CYCLES_PER_SEC
default 20000000
config HARVARD
def_bool y
config FLASH_BASE_ADDRESS
default 0x00000000
config FLASH_SIZE
default 0
# em9d has no FLASH so size is 0.
config SRAM_BASE_ADDRESS
default 0x00000000 if NSIM
default 0x00000000
config SRAM_SIZE
default 0 if NSIM
default 0
# em9d has no SRAM so size is 0.
config ICCM_BASE_ADDRESS
default 0x00000000
config ICCM_SIZE
default 256
config DCCM_BASE_ADDRESS
default 0x80000000
config DCCM_SIZE
default 128
if GPIO
config GPIO_DW
def_bool y
if GPIO_DW
config GPIO_DW_0
def_bool y
if GPIO_DW_0
config GPIO_DW_0_NAME
default "GPIO_PORTA"
config GPIO_DW_0_IRQ_PRI
default 1
endif # GPIO_DW_0
config GPIO_DW_1
def_bool y
if GPIO_DW_1
config GPIO_DW_1_NAME
default "GPIO_PORTB"
config GPIO_DW_1_IRQ_PRI
default 1
endif # GPIO_DW_1
config GPIO_DW_2
def_bool y
if GPIO_DW_2
config GPIO_DW_2_IRQ_PRI
default 1
config GPIO_DW_2_NAME
default "GPIO_PORTC"
endif # GPIO_DW_2
config GPIO_DW_3
def_bool y
if GPIO_DW_3
config GPIO_DW_3_IRQ_PRI
default 1
config GPIO_DW_3_NAME
default "GPIO_PORTD"
endif # GPIO_DW_3
endif # GPIO_DW
endif # GPIO
if I2C
config I2C_CLOCK_SPEED
default 100
config I2C_DW
def_bool y
if I2C_DW
config I2C_0
def_bool y
if I2C_0
config I2C_0_NAME
default "I2C_0"
config I2C_0_DEFAULT_CFG
default 0x3
config I2C_0_IRQ_PRI
default 1
endif # I2C_0
config I2C_1
def_bool y
if I2C_1
config I2C_1_NAME
default "I2C_1"
config I2C_1_DEFAULT_CFG
default 0x3
config I2C_1_IRQ_PRI
default 1
endif # I2C_1
endif # I2C_DW
endif # I2C
if UART_NS16550
config UART_NS16550_PORT_0
def_bool n
if UART_NS16550_PORT_0
config UART_NS16550_PORT_0_NAME
default "UART_0"
config UART_NS16550_PORT_0_IRQ_PRI
default 1
config UART_NS16550_PORT_0_BAUD_RATE
default 115200
config UART_NS16550_PORT_0_OPTIONS
default 0
endif # UART_NS16550_PORT_0
config UART_NS16550_PORT_1
def_bool y
if UART_NS16550_PORT_1
config UART_NS16550_PORT_1_NAME
default "UART_1"
config UART_NS16550_PORT_1_IRQ_PRI
default 1
config UART_NS16550_PORT_1_BAUD_RATE
default 115200
config UART_NS16550_PORT_1_OPTIONS
default 0
endif # UART_NS16550_PORT_1
endif # UART_NS16550
if UART_CONSOLE
config UART_CONSOLE_ON_DEV_NAME
default "UART_1"
endif
if SPI
config SPI_DW
def_bool y
if SPI_DW
config SPI_DW_CLOCK_GATE
def_bool n
config SPI_DW_FIFO_DEPTH
default 32
config SPI_DW_ARC_AUX_REGS
def_bool n
config SPI_0
def_bool y
if SPI_0
config SPI_0_IRQ_PRI
default 0
endif # SPI_0
config SPI_1
def_bool y
if SPI_1
config SPI_1_IRQ_PRI
default 0
endif # SPI_1
endif # SPI_DW
endif # SPI
endif #SOC_EM9D