zephyr

History

Torsten Rasmussen 1cccc8a8fe cmake: increase minimal required version to 3.20.0 Move to CMake 3.20.0. At the Toolchain WG it was decided to move to CMake 3.20.0. The main reason for increasing CMake version is better toolchain support. Better toolchain support is added in the following CMake versions: - armclang, CMake 3.15 - Intel oneAPI, CMake 3.20 - IAR, CMake 3.15 and 3.20 Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>		2021-08-20 09:47:34 +02:00
..
boards	…
src	…
CMakeLists.txt	…
README.rst	…
prj.conf	…
sample.yaml	…

README.rst

.. _pca9633:

PCA9633: 4-Channel RGB
######################

Overview
********

This sample controls 4 LEDs connected to a PCA9633 driver, using the
following pattern:

 1. turn on LEDs
 2. turn off LEDs
 3. set the brightness to 50%
 4. turn off LEDs
 5. blink the LEDs
 6. turn off LEDs

Building and Running
********************

Build the application for the :ref:`stm32373c_eval_board` board, and connect
a PCA9633 LED driver on the bus I2C-1 at the address 0x62.

.. zephyr-app-commands::
   :zephyr-app: samples/drivers/led_pca9633
   :board: stm32373c_eval
   :goals: build
   :compact:

For flashing the application, refer to the Flashing section of the
:ref:`stm32373c_eval_board` board documentation.

References
**********

- PCA9633: https://www.nxp.com/docs/en/data-sheet/PCA9633.pdf