zephyr

History

Torsten Rasmussen 1cccc8a8fe cmake: increase minimal required version to 3.20.0 Move to CMake 3.20.0. At the Toolchain WG it was decided to move to CMake 3.20.0. The main reason for increasing CMake version is better toolchain support. Better toolchain support is added in the following CMake versions: - armclang, CMake 3.15 - Intel oneAPI, CMake 3.20 - IAR, CMake 3.15 and 3.20 Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>		2021-08-20 09:47:34 +02:00
..
boards	…
src	…
CMakeLists.txt	…
README.rst	…
prj.conf	…
sample.yaml	…

README.rst

.. _ht16k33:

HT16K33 LED driver with keyscan
###############################

Overview
********

This sample controls the LEDs connected to a `Holtek HT16K33`_
driver. The sample supports up to 128 LEDs connected to the
rows/columns of the HT16K33.

The LEDs are controlled using the following pattern:

 1. turn on all connected (up to 128) LEDs one-by-one
 2. blink the LEDs at 2 Hz, 1 Hz, and 0.5 Hz
 3. reduce the brightness gradually from 100% to 0%
 4. turn off all LEDs, restore 100% brightness, and start over

The sample logs keyscan events on the console.

Building and Running
********************

Build the application for the :ref:`nrf52840dk_nrf52840` board, and
connect a HT16K33 LED driver at address 0x70 on the I2C-0 bus.

.. zephyr-app-commands::
   :zephyr-app: samples/drivers/ht16k33
   :board: nrf52840dk_nrf52840
   :goals: build
   :compact:

For flashing the application, refer to the Flashing section of the
:ref:`nrf52840dk_nrf52840` board documentation.

References
**********

.. target-notes::

.. _Holtek HT16K33: http://www.holtek.com/productdetail/-/vg/HT16K33