mirror of
https://github.com/zephyrproject-rtos/zephyr.git
synced 2024-12-04 10:18:24 +08:00
9f52bfd12b
Provide three basic examples to test the x-nucleo-iks02a1 shield:
- Test shield standard mode
Acquire sensor data from shield configured in mode 1.
- Test shield sensorhub mode
Acquire sensor data from shield configured in mode 2.
- Test on-shield microphone
Acquire microphone PDM audio and output it in 16-bit
PCM format to console.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
75 lines
2.3 KiB
ReStructuredText
75 lines
2.3 KiB
ReStructuredText
.. _x-nucleo-iks02a1-shub-sample:
|
|
|
|
X-NUCLEO-IKS02A1 shield: Sensorhub (Mode 2) sample
|
|
##################################################
|
|
|
|
Overview
|
|
********
|
|
This sample is provided as an example to test the X-NUCLEO-IKS02A1 shield
|
|
configured in Sensor Hub mode (Mode 2).
|
|
Please refer to :ref:`x-nucleo-iks02a1` for more info on this configuration.
|
|
|
|
This sample enables IIS2DLPC and ISM330DHCX sensors. Since all other shield
|
|
devices are connected to ISM330DHCX, the ISM330DHCX driver is configured in sensorhub
|
|
mode (CONFIG_ISM330DHCX_SENSORHUB=y) with the IIS2MDC magnetometer as external
|
|
slave.
|
|
|
|
Then sensor data are displayed periodically
|
|
|
|
- IIS2DLPC 3-Axis acceleration
|
|
- ISM330DHCX 6-Axis acceleration and angular velocity
|
|
- ISM330DHCX (from IIS2MDC) 3-Axis magnetic field intensity
|
|
|
|
|
|
Requirements
|
|
************
|
|
|
|
This sample communicates over I2C with the X-NUCLEO-IKS02A1 shield
|
|
stacked on a board with an Arduino connector. The board's I2C must be
|
|
configured for the I2C Arduino connector (both for pin muxing
|
|
and devicetree). See for example the :ref:`nucleo_f401re_board` board
|
|
source code:
|
|
|
|
- :zephyr_file:`boards/arm/nucleo_f401re/nucleo_f401re.dts`
|
|
- :zephyr_file:`boards/arm/nucleo_f401re/pinmux.c`
|
|
|
|
Please note that this sample can't be used with boards already supporting
|
|
one of the sensors available on the shield (such as disco_l475_iot1)
|
|
as sensors multiple instances are not supported.
|
|
|
|
References
|
|
**********
|
|
|
|
- X-NUCLEO-IKS02A1: http://www.st.com/en/ecosystems/x-nucleo-iks02a1.html
|
|
|
|
Building and Running
|
|
********************
|
|
|
|
This sample runs with X-NUCLEO-IKS02A1 stacked on any board with a matching
|
|
Arduino connector. For this example, we use a :ref:`nucleo_f401re_board` board.
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/shields/x_nucleo_iks02a1/sensorhub/
|
|
:host-os: unix
|
|
:board: nucleo_f401re
|
|
:goals: build
|
|
:compact:
|
|
|
|
Sample Output
|
|
=============
|
|
|
|
.. code-block:: console
|
|
|
|
|
|
X-NUCLEO-IKS02A1 sensor Mode 2 dashboard
|
|
|
|
IIS2DLPC: Accel (m.s-2): x: 0.077, y: -0.766, z: 9.878
|
|
ISM330DHCX: Accel (m.s-2): x: 0.383, y: -0.234, z: 9.763
|
|
ISM330DHCX: GYro (dps): x: 0.004, y: 0.003, z: -0.005
|
|
ISM330DHCX: Magn (gauss): x: 0.171, y: 0.225, z: -0.363
|
|
7:: iis2dlpc trig 1215
|
|
7:: ism330dhcx acc trig 2494
|
|
7:: ism330dhcx gyr trig 2494
|
|
|
|
<updated endlessly every 2 seconds>
|