62 lines
1.8 KiB
ReStructuredText
62 lines
1.8 KiB
ReStructuredText
.. _adc-sample:
|
|
|
|
Analog-to-Digital Converter (ADC)
|
|
#################################
|
|
|
|
Overview
|
|
********
|
|
|
|
This sample demonstrates how to use the ADC driver API.
|
|
|
|
Depending on the MCU type, it reads the ADC samples of one or two ADC channels
|
|
and prints the readings to the console. If supported by the driver, the raw
|
|
readings are converted to millivolts.
|
|
|
|
The pins of the ADC channels are board-specific. Please refer to the board
|
|
or MCU datasheet for further details.
|
|
|
|
.. note::
|
|
|
|
This sample does not work on Nordic platforms where there is a distinction
|
|
between channel and analog input that requires additional configuration. See
|
|
:zephyr_file:`samples/boards/nrf/battery` for an example of using the ADC
|
|
infrastructure on Nordic hardware.
|
|
|
|
|
|
Building and Running
|
|
********************
|
|
|
|
The ADC peripheral and pinmux is configured in the board's ``.dts`` file. Make
|
|
sure that the ADC is enabled (``status = "okay";``).
|
|
|
|
In addition to that, this sample requires an ADC channel specified in the
|
|
``io-channels`` property of the ``zephyr,user`` node. This is usually done with
|
|
a devicetree overlay. The example overlay in the ``boards`` subdirectory for
|
|
the :ref:`nucleo_l073rz_board` can be easily adjusted for other boards.
|
|
|
|
Building and Running for ST Nucleo L073RZ
|
|
=========================================
|
|
|
|
The sample can be built and executed for the
|
|
:ref:`nucleo_l073rz_board` as follows:
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/drivers/adc
|
|
:board: nucleo_l073rz
|
|
:goals: build flash
|
|
:compact:
|
|
|
|
To build for another board, change "nucleo_l073rz" above to that board's name
|
|
and provide a corresponding devicetree overlay.
|
|
|
|
Sample output
|
|
=============
|
|
|
|
You should get a similar output as below, repeated every second:
|
|
|
|
.. code-block:: console
|
|
|
|
ADC reading(s): 42 (raw)
|
|
|
|
.. note:: If the ADC is not supported, the output will be an error message.
|