344 lines
8.3 KiB
C
344 lines
8.3 KiB
C
/*
|
|
* Copyright (c) 2019 Intel Corporation
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT microchip_xec_timer
|
|
|
|
/**
|
|
* @file
|
|
* @brief Microchip XEC Counter driver
|
|
*
|
|
* This is the driver for the 16/32-bit counters on the Microchip SoCs.
|
|
*
|
|
* Notes:
|
|
* - The counters are running in down counting mode.
|
|
* - Interrupts are triggered (if enabled) when the counter
|
|
* reaches zero.
|
|
* - These are not free running counters where there are separate
|
|
* compare values for interrupts. When setting single shot alarms,
|
|
* the counter values are changed so that interrupts are triggered
|
|
* when the counters reach zero.
|
|
*/
|
|
|
|
#include <logging/log.h>
|
|
LOG_MODULE_REGISTER(counter_mchp_xec, CONFIG_COUNTER_LOG_LEVEL);
|
|
|
|
#include <drivers/counter.h>
|
|
#include <soc.h>
|
|
#include <errno.h>
|
|
#include <stdbool.h>
|
|
|
|
struct counter_xec_config {
|
|
struct counter_config_info info;
|
|
void (*config_func)(void);
|
|
uint32_t base_address;
|
|
uint16_t prescaler;
|
|
uint8_t girq_id;
|
|
uint8_t girq_bit;
|
|
};
|
|
|
|
struct counter_xec_data {
|
|
counter_alarm_callback_t alarm_cb;
|
|
counter_top_callback_t top_cb;
|
|
void *user_data;
|
|
};
|
|
|
|
#define COUNTER_XEC_REG_BASE(_dev) \
|
|
((BTMR_Type *) \
|
|
((const struct counter_xec_config * const) \
|
|
_dev->config)->base_address)
|
|
|
|
#define COUNTER_XEC_CONFIG(_dev) \
|
|
(((const struct counter_xec_config * const) \
|
|
_dev->config))
|
|
|
|
#define COUNTER_XEC_DATA(_dev) \
|
|
((struct counter_xec_data *)dev->data)
|
|
|
|
static int counter_xec_start(const struct device *dev)
|
|
{
|
|
BTMR_Type *counter = COUNTER_XEC_REG_BASE(dev);
|
|
|
|
if (counter->CTRL & MCHP_BTMR_CTRL_ENABLE) {
|
|
return -EALREADY;
|
|
}
|
|
|
|
counter->CTRL |= (MCHP_BTMR_CTRL_ENABLE | MCHP_BTMR_CTRL_START);
|
|
|
|
LOG_DBG("%p Counter started", dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int counter_xec_stop(const struct device *dev)
|
|
{
|
|
BTMR_Type *counter = COUNTER_XEC_REG_BASE(dev);
|
|
uint32_t reg;
|
|
|
|
if (!(counter->CTRL & MCHP_BTMR_CTRL_ENABLE)) {
|
|
/* Already stopped, nothing to do */
|
|
return 0;
|
|
}
|
|
|
|
reg = counter->CTRL;
|
|
reg &= ~MCHP_BTMR_CTRL_ENABLE;
|
|
reg &= ~MCHP_BTMR_CTRL_START;
|
|
reg &= ~MCHP_BTMR_CTRL_HALT;
|
|
reg &= ~MCHP_BTMR_CTRL_RELOAD;
|
|
reg &= ~MCHP_BTMR_CTRL_AUTO_RESTART;
|
|
counter->CTRL = reg;
|
|
|
|
counter->IEN = MCHP_BTMR_INTDIS;
|
|
counter->CNT = counter->PRLD;
|
|
|
|
LOG_DBG("%p Counter stopped", dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int counter_xec_get_value(const struct device *dev, uint32_t *ticks)
|
|
{
|
|
BTMR_Type *counter = COUNTER_XEC_REG_BASE(dev);
|
|
|
|
*ticks = counter->CNT;
|
|
return 0;
|
|
}
|
|
|
|
static int counter_xec_set_alarm(const struct device *dev, uint8_t chan_id,
|
|
const struct counter_alarm_cfg *alarm_cfg)
|
|
{
|
|
BTMR_Type *counter = COUNTER_XEC_REG_BASE(dev);
|
|
struct counter_xec_data *data = COUNTER_XEC_DATA(dev);
|
|
|
|
if (chan_id != 0) {
|
|
LOG_ERR("Invalid channel id %u", chan_id);
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
/* Interrupts are only triggered when the counter reaches 0.
|
|
* So only relative alarms are supported.
|
|
*/
|
|
if (alarm_cfg->flags & COUNTER_ALARM_CFG_ABSOLUTE) {
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if (data->alarm_cb != NULL) {
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (!alarm_cfg->callback) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (alarm_cfg->ticks > counter->PRLD) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
counter->CNT = alarm_cfg->ticks;
|
|
|
|
data->alarm_cb = alarm_cfg->callback;
|
|
data->user_data = alarm_cfg->user_data;
|
|
|
|
counter->IEN = MCHP_BTMR_INTEN;
|
|
|
|
LOG_DBG("%p Counter alarm set to %u ticks", dev, alarm_cfg->ticks);
|
|
|
|
counter->CTRL |= MCHP_BTMR_CTRL_START;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int counter_xec_cancel_alarm(const struct device *dev, uint8_t chan_id)
|
|
{
|
|
BTMR_Type *counter = COUNTER_XEC_REG_BASE(dev);
|
|
struct counter_xec_data *data = COUNTER_XEC_DATA(dev);
|
|
|
|
if (chan_id != 0) {
|
|
LOG_ERR("Invalid channel id %u", chan_id);
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
counter->CTRL &= ~MCHP_BTMR_CTRL_START;
|
|
counter->IEN = MCHP_BTMR_INTDIS;
|
|
|
|
data->alarm_cb = NULL;
|
|
data->user_data = NULL;
|
|
|
|
LOG_DBG("%p Counter alarm canceled", dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t counter_xec_get_pending_int(const struct device *dev)
|
|
{
|
|
BTMR_Type *counter = COUNTER_XEC_REG_BASE(dev);
|
|
|
|
return counter->STS;
|
|
}
|
|
|
|
static uint32_t counter_xec_get_top_value(const struct device *dev)
|
|
{
|
|
BTMR_Type *counter = COUNTER_XEC_REG_BASE(dev);
|
|
|
|
return counter->PRLD;
|
|
}
|
|
|
|
static int counter_xec_set_top_value(const struct device *dev,
|
|
const struct counter_top_cfg *cfg)
|
|
{
|
|
BTMR_Type *counter = COUNTER_XEC_REG_BASE(dev);
|
|
const struct counter_xec_config *counter_cfg = COUNTER_XEC_CONFIG(dev);
|
|
struct counter_xec_data *data = COUNTER_XEC_DATA(dev);
|
|
int ret = 0;
|
|
bool restart;
|
|
|
|
if (data->alarm_cb) {
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (cfg->ticks > counter_cfg->info.max_top_value) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
restart = ((counter->CTRL & MCHP_BTMR_CTRL_START) != 0U);
|
|
|
|
counter->CTRL &= ~MCHP_BTMR_CTRL_START;
|
|
|
|
if (cfg->flags & COUNTER_TOP_CFG_DONT_RESET) {
|
|
if (counter->CNT > cfg->ticks) {
|
|
ret = -ETIME;
|
|
|
|
if (cfg->flags & COUNTER_TOP_CFG_RESET_WHEN_LATE) {
|
|
counter->CNT = cfg->ticks;
|
|
}
|
|
}
|
|
} else {
|
|
counter->CNT = cfg->ticks;
|
|
}
|
|
|
|
counter->PRLD = cfg->ticks;
|
|
|
|
data->top_cb = cfg->callback;
|
|
data->user_data = cfg->user_data;
|
|
|
|
if (data->top_cb) {
|
|
counter->IEN = MCHP_BTMR_INTEN;
|
|
counter->CTRL |= MCHP_BTMR_CTRL_AUTO_RESTART;
|
|
} else {
|
|
counter->IEN = MCHP_BTMR_INTDIS;
|
|
counter->CTRL &= ~MCHP_BTMR_CTRL_AUTO_RESTART;
|
|
}
|
|
|
|
LOG_DBG("%p Counter top value was set to %u", dev, cfg->ticks);
|
|
|
|
if (restart) {
|
|
counter->CTRL |= MCHP_BTMR_CTRL_START;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void counter_xec_isr(const struct device *dev)
|
|
{
|
|
BTMR_Type *counter = COUNTER_XEC_REG_BASE(dev);
|
|
const struct counter_xec_config *counter_cfg = COUNTER_XEC_CONFIG(dev);
|
|
struct counter_xec_data *data = COUNTER_XEC_DATA(dev);
|
|
counter_alarm_callback_t alarm_cb;
|
|
void *user_data;
|
|
|
|
counter->STS = MCHP_BTMR_STS_ACTIVE;
|
|
MCHP_GIRQ_SRC(counter_cfg->girq_id) = BIT(counter_cfg->girq_bit);
|
|
|
|
LOG_DBG("%p Counter ISR", dev);
|
|
|
|
if (data->alarm_cb) {
|
|
/* Alarm is one-shot, so disable interrupt and callback */
|
|
counter->IEN = MCHP_BTMR_INTDIS;
|
|
|
|
alarm_cb = data->alarm_cb;
|
|
data->alarm_cb = NULL;
|
|
user_data = data->user_data;
|
|
|
|
alarm_cb(dev, 0, counter->CNT, user_data);
|
|
} else if (data->top_cb) {
|
|
data->top_cb(dev, data->user_data);
|
|
}
|
|
}
|
|
|
|
static const struct counter_driver_api counter_xec_api = {
|
|
.start = counter_xec_start,
|
|
.stop = counter_xec_stop,
|
|
.get_value = counter_xec_get_value,
|
|
.set_alarm = counter_xec_set_alarm,
|
|
.cancel_alarm = counter_xec_cancel_alarm,
|
|
.set_top_value = counter_xec_set_top_value,
|
|
.get_pending_int = counter_xec_get_pending_int,
|
|
.get_top_value = counter_xec_get_top_value,
|
|
};
|
|
|
|
static int counter_xec_init(const struct device *dev)
|
|
{
|
|
BTMR_Type *counter = COUNTER_XEC_REG_BASE(dev);
|
|
const struct counter_xec_config *counter_cfg = COUNTER_XEC_CONFIG(dev);
|
|
|
|
counter_xec_stop(dev);
|
|
|
|
counter->CTRL &= ~MCHP_BTMR_CTRL_COUNT_UP;
|
|
counter->CTRL |= (counter_cfg->prescaler << MCHP_BTMR_CTRL_PRESCALE_POS) &
|
|
MCHP_BTMR_CTRL_PRESCALE_MASK;
|
|
|
|
/* Set preload and actually pre-load the counter */
|
|
counter->PRLD = counter_cfg->info.max_top_value;
|
|
counter->CNT = counter_cfg->info.max_top_value;
|
|
|
|
MCHP_GIRQ_ENSET(counter_cfg->girq_id) = BIT(counter_cfg->girq_bit);
|
|
|
|
counter_cfg->config_func();
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define COUNTER_XEC_INIT(inst) \
|
|
static void counter_xec_irq_config_##inst(void); \
|
|
\
|
|
static struct counter_xec_data counter_xec_dev_data_##inst; \
|
|
\
|
|
static struct counter_xec_config counter_xec_dev_config_##inst = { \
|
|
.info = { \
|
|
.max_top_value = DT_INST_PROP(inst, max_value), \
|
|
.freq = DT_INST_PROP(inst, clock_frequency) / \
|
|
(1 << DT_INST_PROP(inst, prescaler)), \
|
|
.flags = 0, \
|
|
.channels = 1, \
|
|
}, \
|
|
\
|
|
.config_func = counter_xec_irq_config_##inst, \
|
|
.base_address = DT_INST_REG_ADDR(inst), \
|
|
.prescaler = DT_INST_PROP(inst, prescaler), \
|
|
.girq_id = DT_INST_PROP(inst, girq), \
|
|
.girq_bit = DT_INST_PROP(inst, girq_bit), \
|
|
}; \
|
|
\
|
|
DEVICE_DT_INST_DEFINE(inst, \
|
|
counter_xec_init, \
|
|
device_pm_control_nop, \
|
|
&counter_xec_dev_data_##inst, \
|
|
&counter_xec_dev_config_##inst, \
|
|
POST_KERNEL, \
|
|
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, \
|
|
&counter_xec_api); \
|
|
\
|
|
static void counter_xec_irq_config_##inst(void) \
|
|
{ \
|
|
IRQ_CONNECT(DT_INST_IRQN(inst), \
|
|
DT_INST_IRQ(inst, priority), \
|
|
counter_xec_isr, \
|
|
DEVICE_DT_INST_GET(inst), 0); \
|
|
irq_enable(DT_INST_IRQN(inst)); \
|
|
}
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(COUNTER_XEC_INIT)
|