zephyr/boards/weact/mini_stm32h743/mini_stm32h743.dts

224 lines
4.4 KiB
Plaintext

/*
* Copyright (c) 2024 Charles Dias <charlesdias.cd@outlook.com>
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <st/h7/stm32h743Xi.dtsi>
#include <st/h7/stm32h743vitx-pinctrl.dtsi>
#include <zephyr/dt-bindings/input/input-event-codes.h>
#include <zephyr/dt-bindings/mipi_dbi/mipi_dbi.h>
/ {
model = "WeAct Studio MiniSTM32H743 Core Board";
compatible = "weact,mini-stm32h743";
chosen {
zephyr,console = &usb_cdc_acm_uart;
zephyr,shell-uart = &usb_cdc_acm_uart;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,display = &st7735r_160x80;
};
leds {
compatible = "gpio-leds";
user_led: led {
gpios = <&gpioe 3 GPIO_ACTIVE_HIGH>;
label = "User LED";
};
};
gpio_keys {
compatible = "gpio-keys";
user_button: button {
label = "User PB";
gpios = <&gpioc 13 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>;
zephyr,code = <INPUT_KEY_0>;
};
};
mipi_dbi_st7735r_160x80 {
compatible = "zephyr,mipi-dbi-spi";
spi-dev = <&spi4>;
dc-gpios = <&gpioe 13 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
st7735r_160x80: st7735r@0 {
compatible = "sitronix,st7735r";
mipi-max-frequency = <20000000>;
mipi-mode = <MIPI_DBI_MODE_SPI_4WIRE>;
reg = <0>;
width = <160>;
height = <80>;
inversion-on;
rgb-is-inverted;
x-offset = <1>;
y-offset = <26>;
pwctr1 = [A2 02 84];
pwctr2 = [C5];
pwctr3 = [0A 00];
pwctr4 = [8A 2A];
pwctr5 = [8A EE];
invctr = <7>;
frmctr1 = [01 2C 2D];
frmctr2 = [01 2C 2D];
frmctr3 = [01 2C 2D 01 2C 2D];
vmctr1 = <14>;
gamctrp1 = [02 1C 07 12 37 32 29 2D 29 25 2B 39 00 01 03 10];
gamctrn1 = [03 1D 07 06 2E 2C 29 2D 2E 2E 37 3F 00 00 02 10];
colmod = <5>;
/* Set D3 (RGB) bit to 1. LV_COLOR_16_SWAP is enabled by default */
madctl = <120>; /* Set to <184> to rotate the image 180 degrees. */
caset = [00 01 00 a0];
raset = [00 1a 00 69];
};
};
aliases {
led0 = &user_led;
sw0 = &user_button;
spi-flash0 = &w25q64_spi;
watchdog0 = &iwdg;
sdhc0 = &sdmmc1;
};
};
&clk_lsi {
status = "okay";
};
&clk_hsi48 {
status = "okay";
};
&clk_hse {
clock-frequency = <DT_FREQ_M(25)>;
status = "okay";
};
&pll {
div-m = <5>;
mul-n = <96>;
div-p = <2>;
div-q = <10>;
div-r = <2>;
clocks = <&clk_hse>;
status = "okay";
};
&rcc {
clocks = <&pll>;
clock-frequency = <DT_FREQ_M(240)>;
d1cpre = <1>;
hpre = <2>;
d1ppre = <1>;
d2ppre1 = <1>;
d2ppre2 = <1>;
d3ppre = <1>;
};
&sdmmc1 {
pinctrl-0 = <&sdmmc1_d0_pc8 &sdmmc1_d1_pc9
&sdmmc1_d2_pc10 &sdmmc1_d3_pc11
&sdmmc1_ck_pc12 &sdmmc1_cmd_pd2>;
pinctrl-names = "default";
cd-gpios = <&gpiod 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
status = "okay";
};
zephyr_udc0: &usbotg_fs {
pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>;
pinctrl-names = "default";
status = "okay";
usb_cdc_acm_uart: cdc_acm_uart {
compatible = "zephyr,cdc-acm-uart";
};
};
&quadspi {
pinctrl-names = "default";
pinctrl-0 = <&quadspi_clk_pb2 &quadspi_bk1_ncs_pb6
&quadspi_bk1_io0_pd11 &quadspi_bk1_io1_pd12
&quadspi_bk1_io2_pe2 &quadspi_bk1_io3_pd13>;
flash-id = <1>;
status = "okay";
w25q64_qspi: qspi-nor-flash@90000000 {
compatible = "st,stm32-qspi-nor";
reg = <0x90000000 DT_SIZE_M(64)>; /* 64 Mbits */
qspi-max-frequency = <40000000>;
status = "okay";
spi-bus-width = <4>;
writeoc = "PP_1_1_4";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
slot0_partition: partition@0 {
reg = <0x00000000 DT_SIZE_M(64)>;
};
};
};
};
&spi1 {
pinctrl-0 = <&spi1_sck_pb3 &spi1_miso_pb4 &spi1_mosi_pd7>;
cs-gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
status = "okay";
w25q64_spi: spi-nor-flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
size = <DT_SIZE_M(64)>; /* 64 Mbits */
status = "okay";
jedec-id = [ef 40 17];
has-dpd;
t-enter-dpd = <3500>;
t-exit-dpd = <3500>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
storage_partition: partition@0 {
label = "storage";
reg = <0x00000000 DT_SIZE_M(64)>;
};
};
};
};
&gpioe {
status = "okay";
lcd_led {
gpio-hog;
gpios = <10 GPIO_ACTIVE_LOW>;
output-high;
};
};
&spi4 {
pinctrl-0 = <&spi4_sck_pe12 &spi4_mosi_pe14>;
cs-gpios = <&gpioe 11 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
status = "okay";
};
&rng {
status = "okay";
};
&backup_sram {
status = "okay";
};
&iwdg1 {
status = "okay";
};