Andriy Gelman 0913d092c9 dts: arm: xmc4xxx: Add extra pinctrl nodes for i2c ... The existing i2c sda/slc pinctrl nodes serve as an input and output for the USIC. This limits the number of pins that can be used for i2c since the pin must be internally connected to both DOUT0 and DX0 signals on the USIC (for the sda signal for example). It is also possible to use separate pins to DOUT0 and DX0, but connect the pins externally. Add these extra pinctrl nodes and document their use in infineon,xmc4xxx-i2c.yaml. Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>		2023-08-16 20:43:50 +02:00
..
psoc6	board: add cy8ckit 062 pioneer	2023-07-27 15:26:40 -04:00
xmc4xxx.dtsi	drivers: pwm: Add driver for xmc4xxx using ccu8 module	2023-07-26 15:09:41 +02:00
xmc4500_F100x1024-intc.dtsi	…
xmc4500_F100x1024-pinctrl.dtsi	dts: arm: xmc4xxx: Add extra pinctrl nodes for i2c	2023-08-16 20:43:50 +02:00
xmc4500_F100x1024.dtsi	dts: arm: infineon: xmc4xxx: Add Port 14/15 to device tree	2023-05-02 12:34:55 +02:00
xmc4700_F144x2048-intc.dtsi	soc: arm: infineon_xmc: Add XMC4700 MCU series	2023-05-02 12:34:55 +02:00
xmc4700_F144x2048-pinctrl.dtsi	dts: arm: xmc4xxx: Add extra pinctrl nodes for i2c	2023-08-16 20:43:50 +02:00
xmc4700_F144x2048.dtsi	soc: arm: infineon_xmc: Add XMC4700 MCU series	2023-05-02 12:34:55 +02:00