zephyr/drivers/sensor/icm42670/icm42670_trigger.c

176 lines
4.2 KiB
C

/*
* Copyright (c) 2022 Esco Medical ApS
* Copyright (c) 2016 TDK Invensense
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <zephyr/device.h>
#include <zephyr/drivers/sensor.h>
#include <zephyr/sys/util.h>
#include "icm42670.h"
#include "icm42670_reg.h"
#include "icm42670_spi.h"
#include "icm42670_trigger.h"
#include <zephyr/logging/log.h>
LOG_MODULE_DECLARE(ICM42670, CONFIG_SENSOR_LOG_LEVEL);
static void icm42670_gpio_callback(const struct device *dev, struct gpio_callback *cb,
uint32_t pins)
{
ARG_UNUSED(dev);
ARG_UNUSED(pins);
struct icm42670_data *data = CONTAINER_OF(cb, struct icm42670_data, gpio_cb);
#if defined(CONFIG_ICM42670_TRIGGER_OWN_THREAD)
k_sem_give(&data->gpio_sem);
#elif defined(CONFIG_ICM42670_TRIGGER_GLOBAL_THREAD)
k_work_submit(&data->work);
#endif
}
static void icm42670_thread_cb(const struct device *dev)
{
struct icm42670_data *data = dev->data;
const struct icm42670_config *cfg = dev->config;
icm42670_lock(dev);
gpio_pin_interrupt_configure_dt(&cfg->gpio_int, GPIO_INT_DISABLE);
if (data->data_ready_handler) {
data->data_ready_handler(dev, data->data_ready_trigger);
}
gpio_pin_interrupt_configure_dt(&cfg->gpio_int, GPIO_INT_EDGE_TO_ACTIVE);
icm42670_unlock(dev);
}
#if defined(CONFIG_ICM42670_TRIGGER_OWN_THREAD)
static void icm42670_thread(void *p1, void *p2, void *p3)
{
ARG_UNUSED(p2);
ARG_UNUSED(p3);
struct icm42670_data *data = p1;
while (1) {
k_sem_take(&data->gpio_sem, K_FOREVER);
icm42670_thread_cb(data->dev);
}
}
#elif defined(CONFIG_ICM42670_TRIGGER_GLOBAL_THREAD)
static void icm42670_work_handler(struct k_work *work)
{
struct icm42670_data *data = CONTAINER_OF(work, struct icm42670_data, work);
icm42670_thread_cb(data->dev);
}
#endif
int icm42670_trigger_set(const struct device *dev, const struct sensor_trigger *trig,
sensor_trigger_handler_t handler)
{
int res = 0;
struct icm42670_data *data = dev->data;
const struct icm42670_config *cfg = dev->config;
if (!handler) {
return -EINVAL;
}
icm42670_lock(dev);
gpio_pin_interrupt_configure_dt(&cfg->gpio_int, GPIO_INT_DISABLE);
switch (trig->type) {
case SENSOR_TRIG_DATA_READY:
data->data_ready_handler = handler;
data->data_ready_trigger = trig;
break;
default:
res = -ENOTSUP;
break;
}
icm42670_unlock(dev);
gpio_pin_interrupt_configure_dt(&cfg->gpio_int, GPIO_INT_EDGE_TO_ACTIVE);
return res;
}
int icm42670_trigger_init(const struct device *dev)
{
struct icm42670_data *data = dev->data;
const struct icm42670_config *cfg = dev->config;
int res = 0;
if (!cfg->gpio_int.port) {
LOG_ERR("trigger enabled but no interrupt gpio supplied");
return -ENODEV;
}
if (!gpio_is_ready_dt(&cfg->gpio_int)) {
LOG_ERR("gpio_int gpio not ready");
return -ENODEV;
}
data->dev = dev;
gpio_pin_configure_dt(&cfg->gpio_int, GPIO_INPUT);
gpio_init_callback(&data->gpio_cb, icm42670_gpio_callback, BIT(cfg->gpio_int.pin));
res = gpio_add_callback(cfg->gpio_int.port, &data->gpio_cb);
if (res < 0) {
LOG_ERR("Failed to set gpio callback");
return res;
}
k_mutex_init(&data->mutex);
#if defined(CONFIG_ICM42670_TRIGGER_OWN_THREAD)
k_sem_init(&data->gpio_sem, 0, K_SEM_MAX_LIMIT);
k_thread_create(&data->thread, data->thread_stack, CONFIG_ICM42670_THREAD_STACK_SIZE,
icm42670_thread, data, NULL, NULL,
K_PRIO_COOP(CONFIG_ICM42670_THREAD_PRIORITY), 0, K_NO_WAIT);
#elif defined(CONFIG_ICM42670_TRIGGER_GLOBAL_THREAD)
data->work.handler = icm42670_work_handler;
#endif
return gpio_pin_interrupt_configure_dt(&cfg->gpio_int, GPIO_INT_EDGE_TO_ACTIVE);
}
int icm42670_trigger_enable_interrupt(const struct device *dev)
{
int res;
const struct icm42670_config *cfg = dev->config;
/* pulse-mode (auto clearing), push-pull and active-high */
res = icm42670_spi_single_write(&cfg->spi, REG_INT_CONFIG,
BIT_INT1_DRIVE_CIRCUIT | BIT_INT1_POLARITY);
if (res) {
return res;
}
/* enable data ready interrupt on INT1 pin */
return icm42670_spi_single_write(&cfg->spi, REG_INT_SOURCE0, BIT_INT_DRDY_INT1_EN);
}
void icm42670_lock(const struct device *dev)
{
struct icm42670_data *data = dev->data;
k_mutex_lock(&data->mutex, K_FOREVER);
}
void icm42670_unlock(const struct device *dev)
{
struct icm42670_data *data = dev->data;
k_mutex_unlock(&data->mutex);
}