146 lines
3.6 KiB
C
146 lines
3.6 KiB
C
/*
|
|
* Copyright (c) 2019 Peter Bigot Consulting, LLC
|
|
* Copyright (c) 2016 Intel Corporation
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT microchip_mcp9808
|
|
|
|
#include <errno.h>
|
|
|
|
#include <kernel.h>
|
|
#include <drivers/i2c.h>
|
|
#include <init.h>
|
|
#include <sys/byteorder.h>
|
|
#include <sys/__assert.h>
|
|
#include <logging/log.h>
|
|
|
|
#include "mcp9808.h"
|
|
|
|
LOG_MODULE_REGISTER(MCP9808, CONFIG_SENSOR_LOG_LEVEL);
|
|
|
|
int mcp9808_reg_read(const struct device *dev, uint8_t reg, uint16_t *val)
|
|
{
|
|
struct mcp9808_data *data = dev->data;
|
|
const struct mcp9808_config *cfg = dev->config;
|
|
int rc = i2c_write_read(data->i2c_master, cfg->i2c_addr,
|
|
®, sizeof(reg),
|
|
val, sizeof(*val));
|
|
|
|
if (rc == 0) {
|
|
*val = sys_be16_to_cpu(*val);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
int mcp9808_reg_write_16bit(const struct device *dev, uint8_t reg,
|
|
uint16_t val)
|
|
{
|
|
struct mcp9808_data *data = dev->data;
|
|
const struct mcp9808_config *cfg = dev->config;
|
|
|
|
uint8_t buf[3];
|
|
|
|
buf[0] = reg;
|
|
sys_put_be16(val, &buf[1]);
|
|
|
|
return i2c_write(data->i2c_master, buf, sizeof(buf), cfg->i2c_addr);
|
|
}
|
|
|
|
int mcp9808_reg_write_8bit(const struct device *dev, uint8_t reg,
|
|
uint8_t val)
|
|
{
|
|
struct mcp9808_data *data = dev->data;
|
|
const struct mcp9808_config *cfg = dev->config;
|
|
uint8_t buf[2] = {
|
|
reg,
|
|
val,
|
|
};
|
|
|
|
return i2c_write(data->i2c_master, buf, sizeof(buf), cfg->i2c_addr);
|
|
}
|
|
|
|
static int mcp9808_set_temperature_resolution(const struct device *dev,
|
|
uint8_t resolution)
|
|
{
|
|
return mcp9808_reg_write_8bit(dev, MCP9808_REG_RESOLUTION, resolution);
|
|
}
|
|
|
|
static int mcp9808_sample_fetch(const struct device *dev,
|
|
enum sensor_channel chan)
|
|
{
|
|
struct mcp9808_data *data = dev->data;
|
|
|
|
__ASSERT_NO_MSG(chan == SENSOR_CHAN_ALL || chan == SENSOR_CHAN_AMBIENT_TEMP);
|
|
|
|
return mcp9808_reg_read(dev, MCP9808_REG_TEMP_AMB, &data->reg_val);
|
|
}
|
|
|
|
static int mcp9808_channel_get(const struct device *dev,
|
|
enum sensor_channel chan,
|
|
struct sensor_value *val)
|
|
{
|
|
const struct mcp9808_data *data = dev->data;
|
|
int temp = mcp9808_temp_signed_from_reg(data->reg_val);
|
|
|
|
__ASSERT_NO_MSG(chan == SENSOR_CHAN_AMBIENT_TEMP);
|
|
|
|
val->val1 = temp / MCP9808_TEMP_SCALE_CEL;
|
|
temp -= val->val1 * MCP9808_TEMP_SCALE_CEL;
|
|
val->val2 = (temp * 1000000) / MCP9808_TEMP_SCALE_CEL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct sensor_driver_api mcp9808_api_funcs = {
|
|
.sample_fetch = mcp9808_sample_fetch,
|
|
.channel_get = mcp9808_channel_get,
|
|
#ifdef CONFIG_MCP9808_TRIGGER
|
|
.attr_set = mcp9808_attr_set,
|
|
.trigger_set = mcp9808_trigger_set,
|
|
#endif /* CONFIG_MCP9808_TRIGGER */
|
|
};
|
|
|
|
int mcp9808_init(const struct device *dev)
|
|
{
|
|
struct mcp9808_data *data = dev->data;
|
|
const struct mcp9808_config *cfg = dev->config;
|
|
int rc = 0;
|
|
|
|
data->i2c_master = device_get_binding(cfg->i2c_bus);
|
|
if (!data->i2c_master) {
|
|
LOG_ERR("mcp9808: i2c master not found: %s", cfg->i2c_bus);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rc = mcp9808_set_temperature_resolution(dev, cfg->resolution);
|
|
if (rc) {
|
|
LOG_ERR("Could not set the resolution of mcp9808 module");
|
|
return rc;
|
|
}
|
|
|
|
#ifdef CONFIG_MCP9808_TRIGGER
|
|
rc = mcp9808_setup_interrupt(dev);
|
|
#endif /* CONFIG_MCP9808_TRIGGER */
|
|
|
|
return rc;
|
|
}
|
|
|
|
static struct mcp9808_data mcp9808_data;
|
|
static const struct mcp9808_config mcp9808_cfg = {
|
|
.i2c_bus = DT_INST_BUS_LABEL(0),
|
|
.i2c_addr = DT_INST_REG_ADDR(0),
|
|
#ifdef CONFIG_MCP9808_TRIGGER
|
|
.alert_pin = DT_INST_GPIO_PIN(0, int_gpios),
|
|
.alert_flags = DT_INST_GPIO_FLAGS(0, int_gpios),
|
|
.alert_controller = DT_INST_GPIO_LABEL(0, int_gpios),
|
|
.resolution = DT_INST_PROP(0, resolution),
|
|
#endif /* CONFIG_MCP9808_TRIGGER */
|
|
};
|
|
|
|
DEVICE_DT_INST_DEFINE(0, mcp9808_init, device_pm_control_nop,
|
|
&mcp9808_data, &mcp9808_cfg, POST_KERNEL,
|
|
CONFIG_SENSOR_INIT_PRIORITY, &mcp9808_api_funcs);
|