zephyr/drivers
Ivo Clarysse 29d2a438ab drivers: pinmux: stm32f4: add CAN_2 pins
Add pinmux definitions for CAN_2 RX/TX pins on PB5/PB6 and PB12/PB13.

Signed-off-by: Ivo Clarysse <ivo@bcdevices.com>
2020-01-30 14:27:28 -05:00
..
adc treewide: use full path to clock_control/stm32_clock_control.h header 2020-01-26 17:52:12 +01:00
audio kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
bluetooth treewide: use full path to ipm.h header 2020-01-26 17:52:12 +01:00
can drivers: can: Add SocketCAN support to mcux flexcan driver 2020-01-30 16:03:34 +02:00
clock_control soc: arm: nordic_nrf: nrf52: Add workaround for anomaly 132 2020-01-29 15:38:55 +01:00
console console: uart: Ifdef an include 2020-01-28 14:02:54 -05:00
counter drivers: counter: add counter_get_value(), deprecate counter_read() 2020-01-28 12:52:46 -05:00
crypto drivers/crypto: mbedTLS_shim add support for CAP_NO_IV_PREFIX 2020-01-16 18:34:20 +01:00
display drivers: display: Add support for RGB565 to SDL display 2020-01-20 09:21:04 -06:00
dma drivers/dma: Add support for 3 instances instead of only one. 2020-01-28 18:18:18 -05:00
eeprom drivers/eeprom: stm32: Added support for L0 Series 2020-01-14 11:13:42 -05:00
entropy global: Fix up leading/trailing blank lines in files 2020-01-27 17:41:55 -06:00
espi drivers: espi: xec: Allow to intercept eSPI host suspend/reset warnings 2020-01-28 20:13:36 +02:00
ethernet drivers: ethernet: Set the context iface ptr to main interface 2020-01-30 09:42:07 +02:00
flash drivers/flash: stm32: Fix faulty register access 2020-01-29 15:14:22 -06:00
gpio drivers/gpio: Fix indentation in DW driver 2020-01-28 18:18:18 -05:00
hwinfo drivers: hwinfo: Use HAL for reading deviceID. 2019-12-17 09:11:37 +01:00
i2c treewide: use full path to i2c.h header 2020-01-26 17:52:12 +01:00
i2s treewide: use full path to clock_control/stm32_clock_control.h header 2020-01-26 17:52:12 +01:00
ieee802154 drivers: ieee802154: rf2xx: Add missing handle_ack call 2020-01-29 09:01:53 +02:00
interrupt_controller drivers/interrupt-controller: Make irqs DT configured in DW 2020-01-28 18:18:18 -05:00
ipm treewide: use full path to ipm.h header 2020-01-26 17:52:12 +01:00
kscan global: Remove leading/trailing blank lines in files 2019-12-11 19:17:27 +01:00
led treewide: use full path to led/ht16k33.h header 2020-01-26 17:52:12 +01:00
led_strip drivers: clock_control: nrf: Switch to single clock device 2019-12-17 14:38:19 +01:00
lora drivers: lora: sx1276: Added support for RSSI and SNR in recv 2020-01-28 17:28:26 -05:00
modem drivers: modem: gsm: Fix uart_pipe.h location 2020-01-28 19:11:13 +02:00
net drivers: modem: Implement uart_pipe interface for GSM modem 2020-01-28 12:44:17 +02:00
neural_net kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
pcie global: Remove leading/trailing blank lines in files 2019-12-11 19:17:27 +01:00
pinmux drivers: pinmux: stm32f4: add CAN_2 pins 2020-01-30 14:27:28 -05:00
ps2 drivers: ps2: Compile out PS/2 in terms of an eSPI peripheral 2019-11-20 15:02:08 -05:00
ptp_clock kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
pwm treewide: use full path to pwm.h header 2020-01-26 17:52:12 +01:00
sensor treewide: use full path to sensor.h header 2020-01-26 17:52:12 +01:00
serial drivers: sam: UART async API change timeout to signed value. 2020-01-29 19:37:31 +01:00
spi modules: hal_nordic: Update nrfx to version 2.1.0 2020-01-29 15:00:45 +01:00
timer kernel: kconfig: Fix broken references to TICKLESS_KERNEL 2020-01-25 08:14:55 -05:00
usb drivers/usb: Switching to DTS based configuration for DW driver 2020-01-28 18:18:18 -05:00
video video: mt9m114: Fix integer handling issues 2019-11-15 10:11:05 +01:00
watchdog treewide: use full path to watchdog.h header 2020-01-26 17:52:12 +01:00
wifi treewide: use full path to wifi/winc1500.h header 2020-01-26 17:52:12 +01:00
CMakeLists.txt drivers: Add basic LoRa driver support 2019-12-21 12:20:24 +01:00
Kconfig drivers: Add basic LoRa driver support 2019-12-21 12:20:24 +01:00